Question about NetGear Computers & Internet

1 Answer

Facing the Netgear router connectivity Issue?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 2 Answers

There are lots of reasons to facing No internet issues.
Follow below steps to fix issue-

  • Check cable connection are not loose, or damage.
  • Make sure your firmware is updated
  • Soft reset
  • Hard reset

Posted on Feb 07, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 110 Answers

SOURCE: Netgear DG834G router

Are you getting any internet?

Are you using Windows Vista?

Posted on Oct 19, 2007

redhaze89

redhaze89

  • 854 Answers

SOURCE: trying to connect xbox to

A. Determine the IP Address and MAC Address of the Xbox. Note: You may find the IP address and MAC address of your Xbox on your Dashboard's Network Settings. Please refer to your Xbox manual for more information on this. B. Reserve the IP address. 1. Please open any web browser like Internet Explorer or Netscape Navigator. 2. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key. 3. For security reasons, the router has its own user name and password. When prompted, enter admin for the User name and password for the Password, both in lower case letters. Note: If it does not take password as the password, you might have changed it when you have run the NETGEAR Setup CD so please try other passwords. If you cannot remember the password, you need to reset the router and run the Setup CD to reconfigure it. 4. When the setup page opens, click on LAN IP Setup under Advanced tab. 5. Click on Add under Address Reservation. 6. Under Address Reservation window, please select the radio button of the computer you wish to add from the Address Reservation Table. 7. If the computer you want is not on the list, please click on the Refresh button to update the table. 8. If the computer is still not on the Address Reservation Table, please type in the IP Address, MAC Address, and Device Name of the computer you wish to add. 9. Click the Add button when done. C. Forward the ports. 1. Click on the option with the name Port Forwarding/Port Triggering under the Advanced. For older firmware version, click on Port Triggering tab or just click Port Forwarding on Please select the service type. 2. Click Add and another window will pop up. 3. Type Xbox for Name. Set the radio button to Enable. 4. On Outgoing Port Range, set the Start Port and End Port to 3074. 5. On Incoming Port Range, you also have to indicate 3074 for Start Port and End Port. Save the settings by clicking on Apply. 6. Please repeat steps b to e and indicate 88 for Start Port and End Port. Then change the Name to Xbox2. Note: If it still does not work, you may try these other options: D. Lower down the MTU. 1. Access the Setup page of the router (refer to Step 2 above). 2. Click on the WAN Setup under Advanced tab. 3. Lower down the MTU size to 1492, 1400, 1358 or 1300. 4. Click on the Apply button. E. Enable UPnP. 1. Go to UPnP tab of the router. 2. Enable UPnP and then save the settings by clicking on Apply. Some websites and devices require UPnP or Universal Plug and Play. Just make sure that it is enabled on the router. F. Upgrade the firmware. Note: Follow the steps below if the above troubleshooting still do not allow Xbox to connect using the router. 1. Please verify the router version and model either underneath or at its side panel. 2. Go to http://kbserver.NETGEAR.com/downloads_support.asp and please select the model of the router. 3. Click the appropriate version of the router. 4. Select the link of the latest firmware. Click the button Right-click and Save to Download. Save the file to the Desktop. Note: Please perform firmware upgrade with Wired or Ethernet connection only. 5. Before upgrading, please write down all current settings since you need to enter them manually. 6. Using the computer hardwired on the router, please launch Internet Explorer and access the Setup page of the router (refer to Step 2). 7. Click on Maintenance and then Router Upgrade. 8. Click on Browse and locate the upgraded file in your Desktop. Then click on Upload. 9. Please wait for the router to reboot. After a successful firmware upgrade, you need to reset the router. E. Reset the router. 1. Please push the reset button at the back of the router and release after 30 seconds. 2. Unplug the power adapter for 10 seconds and then plug it back in. (this note should go before the step to Reset the router) Note: Resetting the router will erase all the settings so it needs to be reconfigured afterwards. The router can be reconfigured using the setup CD or by manual configuration.

Posted on Jun 15, 2009

PC Commando

Eric Spencer

  • 142 Answers

SOURCE: xbox360/netgear WGR614 V9 connection issue

Do you have encryption enabled on your router? If so you will need to enter the encryption key of the passphrase in the network setup of the xbox 360

Posted on Sep 19, 2009

Harleen Nash

  • 1768 Answers

SOURCE: 1 year old Toshiba Laptop will not connect to NETGEAR wgr614v9

1.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.

Posted on Jul 12, 2010

johncorde40110

john cordey

  • 730 Answers

SOURCE: i have netgear router in my office and its working fine but every synomious we are lossing wifi connectivity but in router all the lights are blinking so every time i have to restart the router

Best solution if a hard reset doesn't cure this then you need to do a soft reset or change the dchp to a higher value for the conflict to correct itself.SOFT reset ....first go to your routers IP address ...usually on the router but you can google it.for example netgear routers it is 192.168.0.1 then enter in lower case admin : admin sometimes you have to enter a capital A for admin.
then look for reset restart and it will fix from the ISP end which is different to just restarting router.check if you can update the firmware whilst on that page.if connectivity still drops then you next best approach is to change the dchp settings in your internet settings.for example change the number from 192.168.0 .? To 192.168.0.20 this is not the DNS but dchp.you can google this workaround.good luck.

Posted on Mar 02, 2015

Testimonial: "thank u sir for your suggestion as u said i updated my router firmware now its working fine if problem presists again i approach for changing dhcp settings"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

6 Answers

HOW TO RESET THE ROUTER


You can reset your Netgear router/wireless WGT624 router to the factory settings from within the router manager. The reset procedure removes all user-configured settings and returns the router to the original factory settings.

For this reason, only reset the router if you encounter problems that can't be solved with other methods.

Step 1: Check that your Netgear router/wireless WGT624 router is properly connected with your system or not. If it is OK, then press reset button on Netgear router for at least 10 seconds. The 'test' light should flash during this process.

Step 2: Now open browser and enter Netgear's IP address into the address bar. Generally, '192.168.0.1' is the Netgear router IP address but you can find specific IP address in Netgear router manual.

Step 3: Now enter your default username and password to log in to router.

Step 4: Click 'Erase' button under the 'Revert to Factory Default Settings'. This process will erase all your previous changes that have been made to the router and restore the configuration settings to factory setting. Don't interrupt the process until the process is finished.

Once the router's 'test' light has stopped blinking and the configuration page you are on has refreshed, the router has been reset.

Feel free to get instant online Netgear router support at http://www.vtechsquad.com/netgear-router-support/ to fix Netgear router/wireless router issues.

Feb 06, 2012 | NetGear : WGT624 108 Mbps Wireless...

1 Answer

Netgear router N 300 cannot connect to the internet using laptop


There are many router related settings on NETGEAR wireless router and if these are not configured properly, then issues such as router not connecting to Internet might come up. All NETGEAR wireless router users facing router not connecting to Internet are suggested to verify the router related settings such as access points and reconfigure them if required. Users are also advised to check the firewall settings on the system and ensure that they are not blocking the connection.

Jul 03, 2011 | Computers & Internet

2 Answers

I have internet access when I plug in the ethernet cable from the modem, but when I try to access the internet via the router it says 'connected but no internet access'. What is the problem?


Hi there,
I know it is very frustrating if these things do not work. I am sure that the router is not setup properly that is why it is not working. It says connected because you have a good connection from pc to the router. But the connection from your Netgear router to the modem is not working. There is a possible IP conflict between your modem and router. I suggest changing the IP address of your netgear router to 10.10.10.1 . To do this click the link below:
ftp://downloads.netgear.com/files/WNR2000_UM_24FEB09.pdf
Note: This is the manual for your router. Go to LAN TCP/IP Setup Parameters to change the router's IP address.

Apr 03, 2011 | NetGear WNR2000 Wireless Router

1 Answer

Belkin wireless G router incompatible with netgear modem


connect your computer to netgear modem alone and check for the ip address in the computer
(make sure that you have selected "assign ip automatically" in computer)...
to open command prompt type "cmd" and hit enter in run box...
then you can check ip address by typing "ipconfig" in command prompt...
make a note of IP adress or ipV4 address found under the heading "ethernet adapter local area connection"
it might be 192.168.X.X
now connect only the belkinrouter and check for the ip address using the same steps above...
it might be 192.168.2.X
make a note of that...
now compare both the ip addresses if they both have the same value in first three places...that is
192.168.2.... or something like 192.168.1.... or 192.168.0.... then you are facing with double NAT issue...
all that you need to do for that is to change the ip address of belkin router...
if it is 192.168.2.1 change into something like 192.168.15.1...the issue will get resolved....if not you can reset the belkin
router by pressing and holding the reset button for 30 seconds using a toothpick when the power is turned on...

Apr 02, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...

2 Answers

Router Netgear Rangemax has to be reset/rebooted at every computer start-up to accquire signal.Remove jumper and works wireless until next start-up


Hi,

Upgrade the firmware on the router using the below steps:

A. Open the router page using the following way:

1. Connect a computer to the router using any one of the 4 available ports.
2. Open the browser (Internet Explorer, Mozilla Firefox or Safari).
3. Access the router usually by typing 'http://192.168.1.1' or 'http://www.routerlogin.com' in the address bar.
4. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).

B. Visit the following link to download the latest firmware.

http://kb.netgear.com/app/products/family/a_id/1299

C. Please follow the steps to upload the firmware of the router:
1. Open the router page using the steps mentioned above.
2. Under Maintenance, click router Upgrade.
3. Click Browse and locate the upgrade file.
4. Click Upload.
5. Wait for the router to reboot.
6. Click on 'Logout' (at the bottom of the list) from left menu.

Oct 28, 2009 | NetGear RangeMax WPN824 Router

1 Answer

Keep getting kicked out of ea servers half way through game (fifa 10) even bought new router still no difference


Hi

can you let me know is it working fine with the wired connection or not and secondary when you connect your system with the modem is it working fine or not, if yes and you are facing issue with the wireless connection only then you can change the channel on the router and the securitytype as well, do reply for further quaries

thanks

Oct 25, 2009 | NetGear DG834G Router

2 Answers

Netgear Wireless Router won't work with my Linksys wired router.


As asked above, why would you want the wired router and the wireless router on the same network?

The direct answer to your question(s) is found on Netgear's website. http://kb.netgear.com/app/answers/detail/a_id/965/kw/wpn824/r_id/166

The key is to turn off the Netgear DHCP, and give it an address that is unreachable by the Linksys DHCP ie if the Linksys gives out IP addresses starting at 100 or 101, you set your IP address to 99, turn off the DHCP, and plug it into the network NOT using the WAN port, ever. We tend to start at 251 or 221 just for clarity's sake.

The point is you answered your own question. The Netgear wired and wireless works fine. One piece of equipment and better reporting statistics....what are you missing?

Carl


Apr 25, 2009 | NetGear RangeMax WPN824 Wireless Router...

5 Answers

Netgear router and Vontage phone box


Have you reviewed the following page and links from it yet. They may answer your questions.
https://www.vonage.com/help.php?article=88&category=3&nav=3

Dec 22, 2007 | Computers & Internet

1 Answer

Netgear DG834G router


Are you getting any internet?

Are you using Windows Vista?

Oct 19, 2007 | NetGear DG834G 54 Mbps 802.11g Wireless...

2 Answers

Resolution of NETGEAR NTP Issue


NETGEAR and the University of Wisconsin ? Madison have identified an issue with how some NETGEAR routers utilize the network time protocol (NTP) public time service provided by the University. Specific NETGEAR home routers rely on public time services provided by the internet community. If a specific public access NTP server is unavailable, these routers will not be able to synchronize their time with the public NTP server. As a result, features such as logging, email alerts, and time-based URL filtering may experience a degradation in time-keeping. Overall router functionality is unaffected. Network traffic to the specified time server, however increases as the router tries to obtain the time. ?As soon as the issue was identified, NETGEAR worked closely with the University of Wisconsin - Madison to understand the issue and minimize any impact,? said Annie Stunden, CIO at the University of Wisconsin. ?NETGEAR has taken a leadership role in working with the University to ensure a reliable networking experience for its customers and to establish best practices for interfacing with our public access servers.?

Feb 19, 2006 | NetGear RP614 Router

Not finding what you are looking for?

Open Questions:

Computers & Internet Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4363 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...