Question about Hardware & Accessories

Open Question

How to set timer/tempeture controler of firefly heat pump for geyser

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a manual ISG12010 GEYSER TIMER,AND HOW DO YOU SET THE TIMER TO ONE OF THE PROGRAMS


Attach a photo ... or Numerous timer manuals appear on following link that might apply to your Geyser:
http://waterheatertimer.org/Woods-timers-and-manuals-old.html#PB

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Oct 12, 2017 | Hardware & Accessories

1 Answer

Where do i connect the geyser load wire to a dhc15a-20a timer


http://waterheatertimer.org/Intermatic-timers-and-manuals.html#PB1
http://waterheatertimer.org/Intermatic-timers-and-manuals.html#FM1

The other terminals are NO NC and Com
Neutral does not connect to these... only Hot
Hot connects to Com... and then connect wire to geyser to the NO contact... general illustration on link above

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Sep 19, 2014 | Hardware & Accessories

1 Answer

How do i fix the firefly heat pump geyser error code a


There are two (2) ways to fix Firefly Heat Pumps Error Codes Error: Advanced Computer User Solution (manual update): 1) Start your computer and log on as an administrator. 2) Click the Start button then select All Programs, Accessories, System Tools, and then click System Restore. 3) In the new window, select "Restore my computer to an earlier time" option and then click Next. 4) Select the most recent system restore point from the "On this list, click a restore point" list, and then click Next. 5) Click Next on the confirmation window. 6) Restarts the computer when the restoration is finished.

Apr 28, 2014 | Pool & Spa

1 Answer

I change thermostat, water pump, housing coolant sensor, but yet when i start driving the tempeture goes up and down and the heat gets kind of cool not all


poor coolant flow water pump? air lock in system? bring to operating temp shut down than open air bleed screws.

Jan 02, 2014 | 1997 Pontiac Sunfire

2 Answers

How to set a Kes load control timer model ISG1201


The Geyser Load Control Timer, ISG1201, is designed to prevent geyser from operating during the Eskom's designated weekly morning and evening peak times. The ISG1201 features 4 easily selectable, pre-programmed, geysers "ON" operating profiles to ensure maximum comfort whilst not burdening the user with the complicated process of having to program the unit.
The profiles are as follows;
  • Program (1) is always "ON"
  • Program (2) "ON" after sunset to accommodate solar geysers
  • Program (3) "OFF" all the time
  • Program (4) savings program - "ON" 6 hours weekdays and 12 hours weekend days
Source: http://www.kgwanyape.com/solutions/isg1201-geyser-load-control-timer/

Oct 31, 2013 | Hardware & Accessories

1 Answer

Geyser timer stopped working


Check circuit breaker.
Click fully off and then back on.
Check for burned smell at breaker or loose crackling sound that says breaker is bad.

Reset timer. Then Reprogram.
Possible geyser timer manual
http://waterheatertimer.org/pdf/Digital-Geyser-Timer 24H-7-Day-Timer-230V Brochure.pdf

This timer has a non-replaceable internal rechargeable battery.
If battery has gone bad, then timer is defunct.

Use manual override button to turn timer ON-OFF.
Then test across terminals 3 and 4 for 240Volts.
Turn timer OFF, and test across terminals 4 and 5 for 240Volts
If no voltage shows then timer does not have output.

If test shows 80% undervoltage, that can cause load not to activate, depending on type of load.
Have electrician check for voltage issues at power company transformer.

Unknown what load timer is connected to.
Max load for this timer at 240 volts is 3680 watts, 16 amps.
Motor load is 230 volt 8 amps.
Check label on load for watt or amp rating.
Volts x amps = watts
Watts divided by volts = amps

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Oct 31, 2012 | Hardware & Accessories

1 Answer

Outside tempeture is wrong


If you let our a pretty reesty **** it should heat up things and that outside temperature should rise pretty quick.

May 21, 2012 | Jandy Aqualink Pda Ps4 Wireless Handheld...

Not finding what you are looking for?
Hardware & Accessories Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5391 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Brad Brown

Level 3 Expert

18157 Answers

Are you a Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...