Question about The Kitchen Appliances - Others

Open Question

Where can I get the slide the meat goes on for the vintage hand crank model?

Posted by on

  • Jean DeLauche
    Jean DeLauche Oct 01, 2018

    Hello, James -

    Just what, exactly, are you asking about? A meat slicer? Can you (will you) provide the manufacturer's name and identify what exactly the item you ask about is? I want to help you with your question, but I need more information from you. Can you please add details in the comment box?



Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the serial number on a Vintage Huffy Slingshot?

I don't know that I'd call any Huffy within the past 40 years "vintage" but the serial number should be either under the bottom bracket (part of the frame where the cranks go through) on the left rear dropout (where wheel axle is mounted) or possibly on the head tube (where the top of the forks goes through the frame).

I’m happy to help further over the phone at

Sep 15, 2017 | Huffy Cycling

2 Answers

Bolt and washer for rival meat slicer mod 1101e/3

Meat Slicer Parts ' eBay
  1. Cached
  2. Similar
Meat Slicer RIVAL 1101E/4 Motor Plastic Washer Replacement Part Vintage ... Rival Food Slicer Meat Motor Holder SCREW 1101E-5 Accessory Spare Part.

Rival Meat Slicer ' eBay
  1. Cached
  2. Similar
Vintage Rival Electr-O-Matic Deli Meat Food Slicer 1101E-2. $45.00; Buy .... Meat Slicer RIVAL 1101E/4 Motor Plastic Washer Replacement Part Vintage. $7.99.

Food Prep & Choppers - Rival Products
  1. Cached
  2. Similar
HM-743 - Rival® Hand Mixer Instruction Manual · 1042-WN - Rival® Folding Food Slicer Manual · CN-742 - Rival® Electric Can Opener Instruction Manual ... rival meat slicer mod 1101e 3 Google Search

Dec 23, 2016 | Rival Food Processors

1 Answer

I can not remove the slide tray need help please thanks

Not seen one for years, but from what I recall, the slide tray can only be dismounted from one position. Try either rotating the tray (carefully !) by hand until it frees, or else turn it on and use the remote control to rotate the tray one slide at a time until you can lift it free. Once you know the correct position, mark the tray and the projector so that you don't have this hassle in the future.

Jul 16, 2016 | Kodak Vintage Carousel Slide Film...

1 Answer

Kitchen slide will only go out 7 inches. it stops. it retracts ok but only goes out 7 inches and stops. are the cables suspose to be slack

I can only assume this is an RV you are talking about. No there should not be slack. I would start by finding the manual slide out mechanism. It will be a hand crank type or unit. Manually slide the kitchen unit out and then try to slide it back in with the button. That will either bring it all the way back in or you can see that the motor is bad or the limits are off.

Apr 19, 2016 | RVs

1 Answer

I can not un screw the middle disc please help 410 hobart

I would carefully use a small burner to the local hot and with WD40 to spray this several times repeat is different from the drill or an impact screwdriver

Sep 10, 2015 | Hobart Vintage Model 410 Meat Slicer -...

1 Answer

How does a Meat Tenderizer work?

"A meat tenderizer is hand-powered tool used to tenderize slabs of meat in preparation for cooking the meat."..."Tenderizing meat with the mallet softens the fibers, making the meat easier to chew, and easier to digest. It is useful when preparing particularly tough cuts of steak, and works well when broiling or frying the meat.[1] It is also used to "pound out" dishes such as chicken fried steak or schnitzel to be wider and thinner." (Wikipedia)

Oct 17, 2013 | Home

1 Answer

Slide out wont exten ? Could I look at

weak batteries can cause this; check or, replace them look for a long crank handle it should be in the front cargo hold the crank goes into the area just below where the slider ram is located then rotate the crank by hand to move the slider manually in or, out

Sep 20, 2013 | Fleetwood RVs

2 Answers

Where is the power button on the mac computer

The power button is on the back of the LCD screen in the lower left hand corner. You should power down by clicking on the Apple Logo in the upper left hand front corner and choose "Shut Down". If your screen freezes, you can power off by pushing the power button and holding it.

Jan 22, 2013 | Apple 24" iMac Desktop

1 Answer

Where on the Kodak Carousel projector do I find what model it is? I was using it to view slides, and the light went out.

Depending on the vintage, the model name could be in a couple of different spots: If it was manufactured prior to 1981, chances are that there is a nameplate on the front of the projector where the folding handle is.
If it was manufactured after 1981, then the model name is on the fixed handle on the side of the projector (the control panel). Every vintage used a different lamp technology, requiring a different voltage lamp. Lamps are available from Bulbman (

May 18, 2010 | Kodak Office Equipment & Supplies

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Appliances - Others Experts


Level 1 Expert

7 Answers


Level 1 Expert

24 Answers


Level 2 Expert

83 Answers

Are you a Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides