Question about Irons

Open Question

I have a jilbere de pairs porcelain flat iron. The numbers for heating are 1-30 which one is for 365?

Posted by on

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
rgall3285

ray gallant

  • 65457 Answers

SOURCE: CAN I CLEAN FLAT IRON?

try running distilled white vinegar thru it works on coffee pots

Posted on Mar 10, 2015

Ad
kaue_dias86

Mack Stewart

  • 11 Answers

SOURCE: half my flat iron will not heat up

It sounds like it is time to invest in a new flat iron. I would really shop around for a good one this time and compare features, quality, performance, warranties, and pricing. You can get started by checking out the comparison chart I found here: http://besthairflatirons.com/. It seems like they have a pretty good selection of quality irons for your hair.

Posted on Sep 05, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water coming out of steam holes


Either: the iron is not hot enough to heat the water to steam temperature or the internal water-flow valve is leaking so that too much water is getting through. Check the iron is getting hot enough first. If it is then run some de-scaler (as used in kettles) through the iron to try to clean all the passageways. Always ensure that you fully re-flush the iron after de-scaling or you'll damage your clothes with any acidic residue left in the iron.

Good luck.

Dec 04, 2016 | Irons

2 Answers

Half my flat iron will not heat up


i'm lookin gfor a solution too; mine was fine one day, now both plates wont heat, even though it says its gotten to the temperature i set. Someone else said the heating coils might've burned out and to get a new one?

Jun 26, 2012 | Remington Pearl Ceramic Ultimate Flat Iron...

1 Answer

Where can I get replacement parts for Rowenta irons?


Fixya is unable to advise parts sources.

Aug 15, 2017 | Irons

1 Answer

My iron won't heat. it has electricity but won't heat


Hi,

Here is a tip that I wrote about Electric Irons and why they do not heat....

Electric Ironnot Heating Up or not Working Right heatman101

Jun 25, 2011 | Rowenta DE-480 Iron

2 Answers

Brown water and seems like sand or fine grit comes from iron ,when first put on with the steam


sounds like it is time to de-scale the iron to loosen all the deposits inside the unit.
add some white viegar to the water ( which should be distilled water ) and heat up and let the iron steam out the solution. now add just water to the unit shake it and rinse out with water and drain. now do one more vinegar / water de-scaling and rinse out again. now fill with just distilled water and let it steam out and now your iron should be clean as new.

c...

Feb 12, 2011 | Russell Hobbs 13153 Iron

1 Answer

Rowenta surfline iron turned off and won't go back on.


Hi,

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

Jan 27, 2010 | Rowenta Surfline Iron DE-333 Iron

1 Answer

My DE-480 iron won't heat


check stat,and element,element could be us

Nov 15, 2009 | Rowenta DE-480 Iron

1 Answer

Phillips Azur Precice 4340 , lost instructions . How do you de calc it ? Thank you . Claire


Fill tank with water and put steam setting to 0.Set temp pial to hottest setting. Let the iron heat up till the light in the hand goes out. Switch off power and hold iron over sink. Push down and hold descale button until all the steam and water has gone from iron. Wipe plate and heat up iron again with no water in it.

Nov 09, 2009 | Philips HI-296 Iron

1 Answer

I have a Rowenta Pro. Iron, model DE-86.1A with auto shut-off. It sticks on auto shut-off. I have to move it around for it to heat up, as indicated by the sensor light on the top.


I believe that is how the safety feature works.

Once the iron detects no movement for a certain period of time (the iron assumes you have finished ironing) the iron will shut of the heating element.

One you have moved it around, the timer should prevent it from auto shutting down for a period of time.

Jul 22, 2009 | Rowenta Irons

Not finding what you are looking for?
Irons Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Irons Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18127 Answers

Are you an Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...