Question about Motorola Radio Communications

Open Question

Good Day, I would like to clone one channel of Motorola PMUE1434 radio to a ICOM IC-F24 radio. Is it possible. I already use the ICOM software CS-F14. V/R Ioannis

The fields on my ICOM software .icf file, about code-XZ and DLP codes do not match with the Motorola's info I've got. (and I was successful on other Motorola radios in the past) but now simply I can not match the filelds.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Benimur

Louie Role

  • 6966 Answers

SOURCE: OLDER ICOM RADIO ICBP5 AND A REGENCY U156B

Hi, The Icom radio models start with IC followed by numbers and then letter(s). The BP5 is the model of the battery pack. Pls post back. I'm not familiar with Regency U156B. However, there is a Regency RU156 which is a 16 channel UHF 25watt mobile radio which could either be crystal controlled or PLL diode matrix. Regency was reported sold to the BK Relm Company, which no longer supports older Regency Radio Equipment. There are a few sites on the Internet where you can get hold of a user's manual (some for a fee) like http://www.bearcat1.com/manuals.htm. Hope this be of some help/idea. Post back how thin gs turned up, the Icom model or should you need additional information. Good luck and kind regards.

Posted on Oct 03, 2007

Ad

Anonymous

  • 2 Answers

SOURCE: icom IC-F1020 and icom ic-f3

cqham.ru

Posted on Apr 13, 2008

eradiostore

eradiostore

  • 1655 Answers

SOURCE: how to set interference eliminator code on motorola two way radio

The FV300 does not have the interference eliminator code feature. (Sorry)

Posted on Jun 30, 2009

Anonymous

  • 12 Answers

SOURCE: ICOM IC-F21 (400-430MHz): Programming problem

When programming the radios the green light will flash when uploading or downloading data. The red light flashes when the battery is low. Maybe they are happening at the same time. As for the error message I would need to know what it said. Carl

Posted on Sep 14, 2009

Anonymous

  • 123 Answers

SOURCE: Require Frequencies for CTCSS codes for Motorola GP 2000

check this link at page 21 or see below

CTCSS PRIVACY CODES FREQUENCY CHART (Hz) Code Freq. Code Freq. Code Freq. Code Freq. Code Freq. 1 67.0 9 91.5 17 118.8 25 156.7 33 210.7 2 71.9 10 94.8 18 123.0 26 162.2 34 218.1 3 74.4 11 97.4 19 127.3 27 167.9 35 225.7 4 77.0 12 100.0 20 131.8 28 173.8 36 233.6 5 79.7 13 103.5 21 136.5 29 179.9 37 241.8 6 82.5 14 107.2 22 141.3 30 186.2 38 250.3 7 85.4 15 110.9 23 146.2 31 192.8 8 88.5 16 114.8 24 151.4 32 203.5 * Channel 8,9 and 10 are designated Canadian Marine Frequencies * Channels 8~14 are low-power FRS license free channels Note: Privacy codes can be programmed for use on Channels 1~22 only

Posted on Feb 04, 2010

Testimonial: "Thanks for the response. appreciated it. It is very useful."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cloning CS-F50 using usb port


Do you have a USB programming cable for the radio? If not, get a USB to serial adapter and plug between the computer USB and serial programming cable. Adapter driver will help with the interface.

Jun 09, 2014 | Icom Cs-f50 Programming Software Ic-f50...

1 Answer

Resetear icom ic f24


Tienes que usar un programador y un software.
si necesitas el software me avisas.
tienes el programador?

Mar 19, 2014 | Icom Ic-f14 / Ic-f24 Programming Software...

2 Answers

Com port problem


Go in communication setup and select port one by one

Jan 27, 2014 | Icom CS-F14/F24 Programming Software v1.2...

1 Answer

How do I reset the F221 to factory settings. I cloned the unit with V1.6 of the programming software with updates that included turning on the user start password and now the box will not communicate with...


F121 VHF, F221 UHF they both use the latest Version 1.7.
For F121 Factory default as follows:Open your CS-F100 software, enter RX TX frequency below, and write to the radio.Ch1: 136.100 MHzCh2: 155.100 MHzCh3: 173.900 MHz
For F221 Enter RX TX frequency belowCh1: 440.000MHzCh2: 460.000MHzCh3: 489.000MHz, then write to your radio
Or you check from this site:http://www.two-way-radio-tools.com/icom.html
HP

Feb 04, 2010 | ICOM Informatique IC-F121 VHF 136-174MHz...

1 Answer

Programming issues with Icom F21


What you have is a programming issue. The radios need to be "cloned" so they will all work together. You can buy the software on line for about $65.00 then you can change frequencies when ever you want.

Nov 17, 2008 | Icom IC-R5 Handheld Scanner

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...