Question about Hardware & Accessories

Open Question

The timer cut in and out - Hardware & Accessories

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

I have a ice-o-matic 400ha2 ice machine that is not making much ice and is to thick. the timer has been replaced,but no change

reduce the thickness thermostat that initiates the timer to minimum, then increase until good ice made.

Aug 29, 2014 | Kitchen Appliances - Others

1 Answer

My intermatic heavy duty timer cuts out

Trippers might be worn out.
Some models have replaceable trippers.
Or buy new timer.


If you need further help, I’m available over the phone at

May 16, 2014 | Heavy Duty Intermatic Timer

1 Answer

I'm looking for a timer to replace the thermostats for 2 furnaces in a riding arena.

1) Yes a spring-wound timer will work.
Woods 59717, Intermatic FD60, etc
There are other models depending on length of time, and color of timer

2) How to wire to 24 volts
24 volt circuit has 2 wires going to load.
Cut one of the wires and then connect cut wire to timer.

3) Buy Woods 59717 or Intermatic FD60 timers at in home improvement.
Both products have 1 year warranty, and both are strong companies.
Spring-wound timers last many years, and set-times are approximate.

If you need further help, I’m available over the phone at

Jan 03, 2013 | Woods 60 Minute Spring Wound Timer in...

2 Answers

My Brinks Timer 46-1022 stopped working. Lost the instructions. Need to know how to program it.

Reset timer and then re-program.
Open following link to identify timer and download manual

You can also contact Hampton products directly for copy of manual:

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Mar 19, 2011 | Hardware & Accessories

1 Answer

We just opened freezer and everything is melting.


A mechanical defrost timer controls the defrost cycle of the freezer. In older models, the timer runs continuously and roughly every six hours, cuts power to the cooling system and sends power to the defrost heater. In newer models the timer advances only while the compressor or defrost cycle is running - an improvement for efficiency. As the timer continues to advance, power to the heating element is cut and power is restored to the cooling system. I believe your refrigerator is on defrost.

Dec 14, 2010 | KitchenAid Superba Architect KSCS25INSS...

1 Answer

Ecoplus Digital 120v Timer Dual Outlet 24hr 7day Timer: my timer is not cutting on when i have it set to....

Make sure your timmer is set to "AUTO" mode and that your programed times/weekdays are good, resetting the timmer should solve your issue i've had it before, these timmers do this to me once and a while.

Make sure you dont have an "O" on the left of your time as this randomises off/on times by 2 to 32 mins. Press "HOUR" and "MINUTES" at the same time to toggle this option.

the timers manual can be found here:
Eco Plus Digital Timer

May 18, 2010 | Day-Timer Ecoplus Digital 120v Timer Dual...

1 Answer

Power Center day/night timer

I would use two timers for this rather than the Zilla, but you could put the moon lights into the second timer set on for short periods before and after the white lights, then plug the white lights into the day outlets and set the timer to have them on for the five hours.

Feb 28, 2010 | Coralife Zilla Aqualight Power Center

Not finding what you are looking for?
Hardware & Accessories Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5391 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Brad Brown

Level 3 Expert

18157 Answers

Are you a Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides