Question about Hardware & Accessories

Open Question

Trying to set timer on pope multi program auto tap timer

Posted by on

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: I have a n older

I do not know that timer.
Many older timers never had online manuals.

Check following 2 links to see if your timer and manual show:
http://waterheatertimer.org/UPM-timers-and-manuals.html
http://waterheatertimer.org/Woods-timers-and-manuals.html#seven

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Posted on Jan 24, 2011

Ad

gwenpaul

  • 1 Answer

SOURCE: how to set up a pope easy set automatic tap timer

How to set up Pope auto matic sprinkler system timer. Lost my directions. Need for 6 outlets on odd days

Posted on Feb 15, 2011

Steve Papp

  • 1010 Answers

SOURCE: My pope easy set tap timer has locked after flat batteries now won't turn on

Do you have a reset button?

Posted on Mar 24, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DO YOU HAVE a manual for a woods e227659 TM-068-2 timer?


Woods TM-068-2

Indoor 7-Day Astronomic Timer

125V ac / 60Hz 15A / 1875W general purpose

8A / 1000W tungsten 500VA electronic ballast

15A / 1875W resistive 120V ac / 60Hz / 8,3A ballast

FEATURES:

• Up to 7 different programmable ON/OFF cycles, cycles repeat weekly.

• Programming fl8xibilify: u8hts fun on/off automatically at sunset/sunrise,

or at any programmed times you choose.

• ln Sunrise/Sunset programming mode, timer will automatically adjust the

programmed ON/OFF cycles to match current sunrise/sunset times.

• Timer automatically adjusts to daylight savings time

WARNING: TIMER IS INTENDED FOR INDOOR USE ONLY!

BEFORE YOU BEGIN PROGRAMMING THE TIMER:

This timer has in internal battery backup to save all programming.

  1. Plug the timer into wall outlet for 30 minutes to charge internal battery.

  2. After 30 minutes, unplug timer and press the RESET button with the tip of a toothpick or similar object to clear the memory.

TO SET THE CLOCK:

  1. Press SET. PRESS +/AUTO or -/RDM to set the current year.

  2. Press SET. PRESS +/AUTO or -/RDM to set the current month from 01 to 12.

  3. Press SET. PRESS +/AUTO or -/RDM to set the current date.

  4. Press SET. Daylight savings mode (DST) will appear on the bottom of the display. PRESS +/AUTO or -/RDM to set mode to either DST AUTO or DST OFF.

  5. Press SET. PRESS +/AUTO or -/RDM to set the current hour. To change between AM and PM, press +/AUTO or -/RDM 12 timers.

  6. Press SET. PRESS +/AUTO or -/RDM to set the current minute from 00 to 59.

  7. Press SET. PRESS +/AUTO or -/RDM to set the Astronomic function to your zone - North (nor), Central (cen), or South (sou).

  8. Press SET to view the sunrise time. To adjust sunrise time press +/AUTO or -/RDM. To go back to the default sunrise timer press ON/OFF.

  9. Press SET to view the sunset time. To adjust the sunset time press +/AUTO or -/RDM. To go back to the default sunrise timer press ON/OFF.

  10. Press and hold SET for 5 seconds to exit clock setting mode.

PROGRAMMING THE TIMER

Note: The timer allows a maximum of 7 programmable ON/OFF cycles.

To program the first ON/OFF cycle: Press SET repeatedly to scroll through setting the clock mode.

  1. Press SET to display ON 1 setting.

  2. Press +/AUTO or -/RDM to select day or group of days you want for cycle 1. Scroll to select either every day, any individual day, weekdays only, or weekends only.

  3. Press SET. Set ON hour by pressing +/AUTO or -/RDM to scroll through and choose hour AM or PM, or Sunrise/Sunset icon for first ON setting. Note: To select Sunset or Sunrise for the ON time, you must scroll through all the AM and PM hours first. If you select Sunrise/Sunset as the programmed ON time, press SET to continue programming OFF setting.

  4. Press SET. Press +/AUTO or -/RDM to set ON minute from 00 to 59.

  5. Press SET to display OFF 1 setting.

Repeat steps 2-4 to program desired OFF time.

To program additional ON/OFF cycles: Repeat steps to create additional ON/OFF cycles (ON 2-OFF 2, ON 3-OFF 3, etc.) up to a maximum of 7 different ON/OFF cycles.

Press and hold SET for 5 seconds to exit programming mode. Note: During programming, if no button is pushed for 30 seconds, the timer will automatically return to standby mode. Press ON/OFF to cancel any setting.

Sun tracking technology: Timer adjusts automatically to changing sunrise and sunset times in sunrise/sunset mode is chosen for any programmed ON or OFF time. For example, if you program a cycle to turn ON at sunset and OFF at 10:00 pm, the timer will automatically adjust ON (sunset) time as sunset time changes throughout the year (and will always turn off at 10:00 pm as programmed).

IMPORTANT! REVIEW PROGRAMMED ON/OFF CYCLES: Press SET to advance through all programmed ON and OFF settings. Make sure there are no overlapping ON or OFF times. Stop at any programmed setting you want to change.

To operate timer: Press +/AUTO until AUTO appears in display. Timer must be in AUTO mode for programmed settings to operate. Plug appliance (such as lamp) into timer and plug timer into wall receptacle.

IMPORTANT: Appliance must be turned ON or be in the ON position before plugging it into timer.

SECURITY (RANDOM) MODE: To operate a plugged-in appliance (such as a lamp) in a random pattern while you are away, to simulate actual use: press -/RDM until RDM appears in display. In Random mode, plugged-in appliance will turn on and off at random, approx. +/- 30 minutes from the programmed settings.

To cancel Random mode, press ON/OFF until RND disappears from display. Timer will now function using your previously programmed settings.

DAYLIGHT SAVINGS (DST) MODE: If timer is in DST AUTO mode, clock time (and sunrise and sunset time) will automatically increase 1 hour on the second Sunday in March at 02:00 am and decrease 1 hour on the first Sunday in November at 02:00 am.

TO OVERRIDE THE TIMER: Press ON/OFF until desired mode is displayed:

ON: Programmed settings will be overridden; the plugged-in appliance will remain on

OFF: Programmed settings will be overridden; the plugged-in appliance will remain off

AUTO ON: Turns plugged-in appliance on immediately until the next programmed OFF time. Press ON/OFF until ON displays on the screen, then press +/AUTO and AUTO will display on the screen.

AUTO OFF: Turns plugged-in appliance off immediately until the next programmed ON time. Press ON/OFF until OFF displays on the screen, then press +/AUTO and AUTO will display on the screen.

RDM ON (Random ON): Turns plugged-in appliance on immediately until the next random off. Press ON/OFF until ON displays on the screen, then press -/RDM and RDM will display on the screen.

RDM OFF (Random OFF): Turns plugged-in appliance off immediately until the next random on time. On/Off times will vary +/- 30 minutes from the programmed settings. Press ON/OFF until OFF displays on the screen, then press -/RDM and RDM will display on the screen.

Consumer Support (800) 561-4321

www.colemancable.com

Dec 12, 2017 | Woods Hardware & Accessories

1 Answer

How to operate pope tap timer (N1625)


Call Pope 1300 134 880
Pope user guides does not show N1625
http://www.popeproducts.com.au/user-guides

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Feb 03, 2013 | Hardware & Accessories

1 Answer

Review ge 15312 settings


Copy following link to identify timer, download manual and link to detailed wiring diagrams.
http://waterheatertimer.org/GE-timers-and-manuals.html#15312

This timer has too many buttons, and programming steps are seriously layered. I think they were trying add programming options, and to avoid confusion found with other brands dawn-dusk timer programming, by adding confusing options and issuing a manual with tiny print.
http://waterheatertimer.org/pdf/GE-15312-sun-smart-Manual.pdf
Look on page 1 of manual on right side, just above 'random security options' heading: Manual says you can use + - buttons to scroll through programs.
OR: Press set-up button twice and P1 ON will display: Display should also display selected setting.
Press set-up again to see P1 OFF, etc
OR: Press set-up twice, and press Enter once.

Press auto button to exit programming, and current time should display.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Nov 13, 2012 | GE Hardware & Accessories

1 Answer

After I set my #055671 2-outlet timer to my turn on and turn off times, I cannot get the my lamp to turn on automatically. What setting should the timer be set on ?? Auto off, Auto on? or what?


There is no repair for defective timer.

I suggest setting timer programs, and then press clock button and timer returns to current time.
At this point the timer is operational, and then do not mess with manual override button.
http://waterheatertimer.org/How-to-program-Utilitec-0155671.html

Correct setting is either AUTO ON -or- AUTO OFF setting.
Auto ON, means lamp turns ON immediately and programming resumes at next set point.
Auto OFF, means lamp turns OFF immediately and programming resumes at next set point.
So you have to wait for time to arrive at set point to see if timer is working.

Troubleshoot from link above:
Check that correct time is set.
Check programming for conflicts and overlaps.
For example ON 8:00 pm Tuesday and OFF 10:00 pm All-days-of-week will cause timer not to operate as expected.
Test outlet with cheap circuit analyzer to ensure that electrical problems are not causing problem.

Take a moment and rate answer:
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Aug 29, 2011 | Hardware & Accessories

1 Answer

Do I set the GE timer # 15089 to Auto on or Auto off for it to be activated. I had it on Auto on however the light stayed on all the time.


I don't have repair for defective timer.
Open following link to identify timer and download manual:
http://waterheatertimer.org/GE-timers-and-manuals.html#15089

Timer should be set to Auto ON for timer programs to run.
Auto OFF is temporary override, and timer resumes schedule at next set point.
ON is always ON
OFF is always OFF

If timer is not operating as expected:
Test outlet for correct polarity and electrical problems using cheap circuit analyzer from hardware store.
Timer programs can have conflicts. Make schedule before setting timer so there are no overlaps that cause timer not to function as expected.
Current time has not been set. Set current time including current day.
Set button has been accidentally pushed, and a number or CTD appear in display.
Timer needs to be reset to clear conflicting programming or error. Push reset button with paperclip and try programming again.
Timer is not able to handle intended load. All timers work for incandescent bulb. Connect timer to incandescent lamp and see if problem continues.
Timer is defective. Buy another timer from Home Depot and return defect in new package.

Aug 17, 2011 | Jasco Ge 7 Day Digital Timer 1 Outlet...

1 Answer

Have the timer set on Auto but lights are not on during the ON period. Also do I need to set times for all 7 periods?


No, you do not need to set all 7 timer events.
When event1 ON and event1 OFF are set, press CLOCK button to exit programming and save programs. Or press PROGRAM button and move to event2 ON and event2 OFF. Exit programming any time by pressing clock button.
http://www.intermatic.com/products/timers/consumer%20outdoor%20timers/digital%20timers/hb88rc.aspx

That being said, if events conflict with each other, timer will not operate.
For example event1 ON FR at 7pm and event1 OFF all-days at 11pm.
The days have to match for on-off times.

Another example event1 ON FR at 7pm and event1 OFF FR 11pm, but event2 ON all days 8pm event2 OFF all days 10pm. This overlap will cause timer to skip programs.

If timer is being used in random mode, timer programs cannot be closer than 1/2 hour apart.

When programming is done, press clock button to display current time.
Timer should be ready to go.
Manual is fuzzy at this point, and does not specifically say, but it appears that you only press MODE button when you want to set another mode beside auto.
I e-mailed Intermatic last week about this unclear spot because several folks are writing in about this timer not going into correct MODE after programs are set.
MODE must be set to automatic
Press MODE button once for manual override function
Press MODE again and RDM displays for random >> this is for lights turning on randomly when on vacation.
Press MODE button third time, and AUTO shows on display >> you want timer in AUTO for timer programs to operate.
Here's the trick ... after setting MODE to auto, press clock button to display current time

If timer will not enter AUTO, then timer is defective.
If Intermatic sends response that is pertinent to your question, I will post again on this thread.
Add a comment any time, and I will respond.

Dec 10, 2010 | Intermatic HB88RC - 7-Day Programmable...

1 Answer

Hello, I have a Tork K600Z astronomic timer which has 6 sets of contacts off of a relay for each. We've burned out the first two releys since the original installation about 7-8 years ago. We've tried to...


Sounds like you need to reprogram timer ....
K series is a multi-channel timer.
If you have 4 relays, then you have 4 channels, and each must be programmed separately.
6 relays, 6 channels.
Each channel controls one of the relays. This lets the timer control multiple circuits such as lights etc, each with a different programming schedule.
Each relay has 3 wiring terminals that are dry until wired with voltage.

Following links has manuals and resources:
http://waterheatertimer.org/Tork-Digital-timers-and-manuals.html#K-series

Intermatic makes a similar series of multi-channel timers, with 1-2-8-16 channel models:
http://waterheatertimer.org/Intermatic-ET-series-timers-and-manuals.html#ET70000

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Jun 29, 2017 | Hardware & Accessories

3 Answers

Hi, I have a Dayton # 2VJ58A Ditital time switch,can I program P1 and P2 with some of the same on and off times during the week. How does the timer know which times to follow when it is put back to the run...


Dayton 2VJ58A is a small, expensive 2 channel timer.

My understanding is that 2 channel timers are made "for the independent control of two circuits." I assume the advantage of multi-channel timers is needing just 1 timer on the control board.

If you are using 2 channels to control one circuit, I don't know the outcome, or if the 2VJ58A is made to do that job. It may ruin the timer!?! Be careful.

The less expensive ST01C timer offers 40 programs per week where overlapping times can exist on same load. These timers advise not to program overlapping times, ST01C troubleshooting says NOTE: Your switch timer automatically skips any conflicting ON event

Dayton timers are made in Japan but I could not locate a web site other than Grainger who sells the product. Probably the timer manual has manufacturing info. Grainger sales might be able to help?
http://www.grainger.com/Grainger/DAYTON-Electronic-Timer-2VJ57

Solution: I would call the seller, or Grainer, or the manufacturer. They might know about the software parameters. I would re-read the instructions carefully, and read up on multi-channel timers before putting power to the timer.

Let us know what you are trying to accomplish with the timer, and maybe we can help from that standpoint

Sep 20, 2010 | Dayton Audio Hardware & Accessories

1 Answer

How to set up a pope easy set automatic tap timer


How to set up Pope auto matic sprinkler system timer. Lost my directions. Need for 6 outlets on odd days

Oct 05, 2009 | Garden

Not finding what you are looking for?
Hardware & Accessories Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5391 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Brad Brown

Level 3 Expert

18157 Answers

Are you a Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...