Question about Hardware & Accessories

Open Question

Everbilt hanging hardware for by-pass closet doors. Hangers are numbered #1 & #2. Instructions say on a 1 3/8" door, put #2 on front door & #1 on rear one. But they hit each other; don't slide well

I put both #2's on front door & both #1's on rear door. Doesn't work. Tried one of each on each door; works better but doesn't seem right. Doors are 8'tall--is this the problem?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: remote lock for back doors and rear tail gate door

Actually I found a solution. I remove the lock relay form the fuse panel and placed it back in place. I did not replace it. After doing this they worked. I probably need to replace the relay at some point, but for now that solved the problem. It was hard for me to believe that there is a separate relay for the lock and unlock circuit.

Posted on Sep 29, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: Power sliding door doesn't work!

Check out http://redhouseon7th.com/redhouse/howto/2001CaravanDoorRepair/index.html?page=Single&Language=0%22

Posted on Apr 06, 2009

pippall

Philip Long

  • 1486 Answers

SOURCE: central locking stopped working

change solenoid in drivers door.

Posted on May 29, 2009

Anonymous

  • 1 Answer

SOURCE: 1998 Toyota Corolla Electric Door Lock Problem

You'll need to replace the solenoid (motor) that doesn't work. Not hard once you get the door panel off. I suggest you buy the correct part, not a universal one.

Posted on Jul 14, 2009

Anonymous

  • 1 Answer

SOURCE: 2003 Chevy Avalanche rear doors won't lock automatically

The rear doors will not lock with the keyless remote, the drivers master switch

Posted on Jul 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I assemble a Stag Minstrel wardrobe from its component parts?


These are the instructions for a Stag Minstrel S150 double door wardrobe which I hope helps figuring out what goes where etc..
img_7935-jnybngct3ul3qwtedknk1fid-2-0.jpg
I've just noticed the photo isn't very clear on line, so here is a transcript of what it says.

Instructions for dismantling Stag Minstrel double wardrobe S150.

1. Remove shelf by sliding forward.
2. Remove hanging rods and shoe rail by sliding their end ferrules ( the circular bits the rods pass through) inwards and sliding the rods clear.
3. Remove the screws that pass through the lower wings of the top gussets into the end panel.
4. Close both doors, bolting the left hand door at the bottom only.
5. Remove the screws that pass through the carcase back into the top panel
6. Remove the screws which pass down through the top of the wardrobe into the end panels, and lift the top, complete with gussets and shelf supports, clear of the wardrobe.
7. Lay the wardrobe on its back, and remove the screws which pass upward through the front and back rails into the bottom panel.
Pull the plinth clear. The wardrobe will now divide into two halves.

NOTE : When reassembling the wardrobe make sure that
(a) the two halves of the wardrobe are located correctly together before fitting the plinth over the bottom location blocks ;
(b) all screws enter the holes bored for them.

Jun 13, 2015 | Home

3 Answers

Whirlpool Supercapacity 465 Oven (RF396 LXE2) Door Problem


These are the instruction on how to remove and replace the door, be sure you locate the removal pins to being able to put it back

ddfb42d.gif
c1ea506.jpg

Feb 13, 2008 | Whirlpool RBS275PD Electric Single Oven

1 Answer

How to disassemble a closet glide bracket


How to Replace a Closet Bifold Pivot Bracket ' Home Guides ' SF Gate

homeguides.sfgate.com > ... > Siding
Slide the bracket forward until it matches the marks left from the old bracket. You will be able to see a divot where the ...

Removing bi-pass sliding glass closet doors - YouTube

https://www.youtube.com > watch

Duration: 1:41
Posted: Jun 23, 2010

Removing a cabinet drawer with full extension hardware - YouTube

https://www.youtube.com > watch

Duration: 3:33
Posted: Mar 1, 2010

May 26, 2014 | California Closets Medusa Wig

1 Answer

Remove everbilt hinge pin


Support the door , remove screws from one leaf of hinge, use a 1/8" punch and tap the hinge pin from the bottom. If you use grease to reinsert make sure it's white lithium grease

Nov 24, 2013 | Everbilt Hinge. 3 in. Square Corner Hinge...

4 Answers

I live in a tiny apartment. What is the best way to store all my clothes in my tiny closet?


How to Maximize Small Closet Storage Space-Small closet storage solutions: read the link below to find out how!http://personalorganizing.about.com/od/bedroomcloset/tp/Small-Closet-Storage.htm

May 07, 2013 | Home

1 Answer

How do I remove the bottom freezer door from an lg refrigerator. Can't get it through the doorway?


After 9 days I imagine you have solved your problem but for those searching for an answer this is what we had to do. In the owners manual on page 15 it tells you to open the drawer fully, remove the lower basket (large one) by tilting the door. Now it states to press both hangers with your thumbs to lift it up. "Hangers" had us stumped. They are little notches, latches that you press in (depress) to release a locking effect, if I remember correctly each side has 2. This allows you to remove the white plastic rail covers. Next remove the 2 white screws; one on each rail near the bottom front. Then with both hands, hold both sides of the freezer door and pull up to separate it from the rails. We not only had to remove the freezer door but the 2 french doors as well. Hope this helped

Aug 18, 2011 | LG LFX25960 Bottom Freezer French Door...

1 Answer

Hallway closet door opens by itself


Remove the hinge pins and you can use a hammer to put a slight bend in them. Tap them back in place.

Oct 06, 2009 | Chamberlain Powerdrive PD422D 1/2 HP...

1 Answer

Whirlpool range


Hello dolphin 1 mom
Welcome tofixya.


You said, accidentally removed the door to my range and now it won't go back on. The door won't go back into the slots on the range.

Send me your e-mail address and I'll e-mail the diagram with the door instructions for removal and replacement.
It will not fit in here with the diagrams.
Waiting for you.
Huuum
Please do not forget to enter a rating when we are done



These are the installation instructions, but with no diagrams
To Remove:
1. Open the oven door. Insert door removal pins, included with
your range, into both hinge hangers. Do not remove the pins
while the door is removed from the range.
2. Slowly close the door until it rests against the door removal
pins.
3. Grasp the door on the sides with your fingers on the front of
the door and your thumbs on the inside surface.
4. Pull door straight up, then toward you. Hinge hangers will
slide out of front frame hinge slot. Do not remove door
removal pins until the door is replaced on the range.
To Replace:
1. Grasp the door on the sides with your fingers on the front of
the door and your thumbs on its inside surface.
2. Hold oven door so that the top edge of each hinge hanger is
horizontal. Insert hinge hangers into the front frame hinge
slots.
3. Tilt top of door toward range. Slide hinge hangers down onto
front frame support pins. Make sure the hinge hangers are
fully seated and engaged on the support pins.
4. Insert the door stop clip with its angular surface at the top of
the frame hinge slot, then push in the bottom of the clip until
its flanges are flush with the front frame.
5. Open the door completely and remove the door removal pins.
Save door removal pins for future use.
6. Close the door.
StorageDrawer
The storage drawer can be removed. Before removing, make sure
drawer is cool and empty.
To Remove:
1. Pull the storage drawer straight back past the drawer stop
notch and the end of the side rails.
2. Lift up the back of the drawer and pull the drawer out.
To Replace:
1. Lift up the back of the drawer and place it inside the range in
its fully forward position.
2. Lift up the front of the drawer to a level position.
3. Slowly push the drawer into the range until the drawer side
rails engage with the gap in the drawer glides.
4. Once the drawer is fully engaged on both sides, slide the
drawer back into the closed position.
NOTE: When removing and replacing the storage drawer, a slight
push may be needed to move the drawer stop notch past the
drawer glides.
A. Removal pins
B. Hinge hanger
A. Hinge hanger
B. Door frame hinge
C. Support pins
A
B
A
B
C
A. Drawer stop notch
B. End of side rail
A. Engage drawer glide
A B
A

Sep 09, 2008 | Whirlpool GR465LXLS Electric Kitchen Range

Not finding what you are looking for?
Hardware & Accessories Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5391 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Brad Brown

Level 3 Expert

18157 Answers

Are you a Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...