Question about GE Ovens

Open Question

My GE Monogram oven is beeping and none of the buttons work when I press them. How do I get it to stop?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: oven

I used the self cleaning mode for 2 hours and the error f2 keeps flashing and beeping, I did try to power off with the breaker and left it off for about a half hour and it still continues to beep and flash f2, what should I do?

Posted on Nov 18, 2008

Ad
jumptrout51

steve

  • 3361 Answers

SOURCE: f0 error code on ge profile oven

Could be a stuck keypad. Try pressing all pads at random several times each to clear it.
If that does not work the ERC(clock) must be replaced.

Posted on May 26, 2009

localwonder

Michael Masters

  • 6784 Answers

SOURCE: F1 error/touch panel not working on GE Monogram Dual Oven

Usually, the F1 means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be canceled, replace the oven control (also called clock or ERC), touch pad, or both.

I recommend a service call for this repair.

Posted on Jun 03, 2009

localwonder

Michael Masters

  • 6784 Answers

SOURCE: F7 beeping an cannot stop it... any solutions?

HI, if this error code cannot be canceled, this will confirm a touch pad issue. the membrane is damaged and, this will require you to replace the ERC.

Replacing the Electronic oven control will fix this issue.

Posted on Jun 24, 2009

ejasperse

  • 189 Answers

SOURCE: GE Monogram Trivection - self-clean cycle with oven racks in

Hello- First off, do not use 'self clean', or as most Techs call it: "Self- Destruct".  This 'feature' cheerfully sold by the salesman destroys more oven and range components than any other failure. Now- the racks had a thin layer of grease on them when the oven tried to turn stuff inside the oven to ash.  The grease is now a hard rubbery coating on the surface of the rack.  To solve this problem, you must determine by observation, where the rack touches the sides of the oven. These contact areas need to be cleaned thoroughly with scotchbrite and a small portion of oven cleaner. Make sure you use gloves. Sliding rack in and out to 'mark' these small spots works pretty good.  Once cleaned and wiped down, they should work fine. I recommend cleaning by removing as much 'stuff' by scraping and wiping down with moist cloth.  Turn on to 450deg for 30 min.  Much safer, less costly.                                                       Please acknowledge this posted solution if helpful.  Have more info if needed-  Thanks  -Ed

Posted on Mar 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GE monogram double oven . Self cleaning top oven and F9 in red showing and beeping noise


F9 is a problem with the oven door lock circuit. If the door is locked, it's probably a bad switch that tells the oven it's locked. If the door isn't locked, it's probably a problem with the lock mechanism.

A common problem on many built-in GE ovens (you don't say if yours is built-in or free standing...) is air circulation in the control panel. The fan that keeps the panel cool either stops working or gets clogged with dirt/dust and can't move any air. This causes the panel to overheat and can cause all kinds of odd problems and error codes. If you have a built-in, check to make sure the fan is working and the mesh screen behind it is clean.

Jul 17, 2016 | GE Monogram ZET3058SHSS Stainless Steel...

1 Answer

GE profile convection double oven. Model#jkp56w0w1ww 1.The touch panel on the Oven is off and none of the button works. There is not light or code in the display area. 2. The light inside the oven...


Oh, you probably got this fixed already. If it happens again, it helps to take the control panel off, insert paper towel folded up neatly and slotted into the ribbon (it absorbs the moisture which causes the ribbon to short out). Sounds crazy but it's true! I saved our family hundreds of dollars with a piece of paper towel!

Aug 18, 2013 | GE Ovens

1 Answer

Our monogram double wall oven has a f7 code on the control panel. None of the buttons appear to be working, except clear, which clears the code. Then still no buttons work, and the f7 code comes back. What...


It's most likely that the error code you are seeing is F1, not F7. F1 is a code for 'stuck touch pad'. You will need to replace the clock/ERC or the touch pad (or both).

Feb 28, 2011 | GE Monogram ZET3058SHSS Stainless Steel...

1 Answer

F9 error message during self cleaning cycle


Hello,F9 error means there is a problem with the lock switch.Check the wiring to the door lock switch (the wire harness may be connected wrongly).Check for stuck lock switch.
Thanks



May 31, 2010 | GE Monogram ZET3058SHSS Stainless Steel...

1 Answer

F1 error/touch panel not working on GE Monogram Dual Oven


Usually, the F1 means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be canceled, replace the oven control (also called clock or ERC), touch pad, or both.

I recommend a service call for this repair.

Jun 02, 2009 | GE Monogram ZET3058SHSS Stainless Steel...

1 Answer

F0 error code on ge profile oven


Could be a stuck keypad. Try pressing all pads at random several times each to clear it.
If that does not work the ERC(clock) must be replaced.

May 26, 2009 | GE Profile JTP18 Electric Single Oven

1 Answer

Microwave stopped heating


HI, this will require the skilled hands of a qualified GE tech. the damaged part here is the Magnetron assembly. this is a very sensitive part that creates radiation and the heating process as well. you will need to replace this device asap if possible.

May 26, 2009 | GE Monogram® ZMC1095BFBB /...

1 Answer

F7 beeping an cannot stop it... any solutions?


HI, if this error code cannot be canceled, this will confirm a touch pad issue. the membrane is damaged and, this will require you to replace the ERC.

Replacing the Electronic oven control will fix this issue.

Mar 29, 2009 | GE JKS05 Electric Single Oven

1 Answer

TOp Oven Light ..


if its a brand new unit (still in waranty) make the service call

Aug 30, 2008 | GE Monogram ZET3058SHSS Stainless Steel...

Not finding what you are looking for?
Ovens Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...