Question about Kitchen Appliances - Others

Open Question

Whirlpool accubake wall oven will not beep

Signal not working either bad beeper device or bad timer

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
aborcass

Ron Coons

  • 2651 Answers

SOURCE: Whirlpool Gold Accubake oven

depress the broil button for 5 seconds it will revert back to Farenheit

Posted on Feb 24, 2008

Ad

Anonymous

  • 8 Answers

SOURCE: Unlocking Oven controls

According to the manufacturer's website you should only need to Press and hold the "Lock" key for 5 seconds. A single tone will sound and the "Loc" will disappear off the display.

This is the link to Whilpool's website and to the manual.
http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%209761079.pdf

Thank you
Agent Matt
Go Ahead. Use Us.

Posted on Apr 07, 2008

Anonymous

  • 1 Answer

SOURCE: whirlpool Accubake Duo Oven Not Heating up

the oven not heating up. it's start up some time and other time u just hear it try to click on but don't hear no fire turn on

Posted on Sep 05, 2008

rylee_smith

Rylee Smith

  • 8619 Answers

SOURCE: whirlpool self cleaning oven Accubake. 2 yr old

Hi

The oven door lock needs approximately 1 hour to cool down before the oven door can be opened after a self cleaning cycle has finished. If the lock does not open after the oven has cooled down, you can try....1) Unplugging the range or shut off the circuit breaker for 5 minutes. Plug the range back in or turn on the circuit breaker. Set the clock and try moving the door lock lever or opening the door. 2) Set the self-clean cycle again and only allow it to work for 15 minutes. Cancel the self-clean cycle and allow the oven to cool. Gently try moving the door lock lever or opening the door.

Most ranges today use 3 different types of door locks...one is a solenoid controlled lock ( you hear a loud buzz noise when setting or unlocking the lock and has a arm that you must move to set the lock )...another is a heat sensitive lock ( has a arm that you must move to lock and un-lock, makes no noises and has a spring that slowly moves to lock the door will the oven is heating up )...Some locks are motorized ( no handle to move, the motor locks the door by it's self when you set the range for self clean )... If the motorized and heat sensitive locks fails to open after the self clean cycle, you must access the lock and move it yourself to open the door. On the free standing ranges, most times you must lift the cook top to access the lock mechanism. On built in ovens, the oven must be pulled out to remove the top access panel to get at the lock mechanism. Some build in ovens can have the control console removed to access the lock system. On the heat sensitive style of lock, there are no electrical parts to operate the lock, usually you will need to replace the lock. On the motorized style of lock, you will have to use a ohm/volt meter to test why the motor will not work. On the solenoid style of lock, the solenoid is often mounted on the back of the range and can be accessed by removing the rear panel, some may be mounted at the front, such as in a built in oven. The failure of the solenoid style of lock is normally caused by a bad lock solenoid. In order to get your door open, you must operate the door latch mechanism manually. Unplug or remove power from the range. Take the rear cover off the range. Locate the door latch assembly and operate it manually and open your door. Then check continuity of the solenoid. Some of the latch assemblies have micro switches to supply power also. You may need to check them. You should be able to get the door open and use your range until you can get a tech to repair if you can not repair yourself.

If you've interrupted the clean cycle or have accidentally set the clean cycle with the oven door open, the latch may have engaged and now the door can't be closed because it will hit the latch. There may be a door activated* switch on the front face of the oven. In this case you may need to manually press that door switch with your finger while at the same time canceling the clean cycle to get the latch to retract so the door can close fully again.

Please do rate this solution as FixYa and revert for further assistance.


Thanks
Rylee

Posted on Jul 06, 2009

Anonymous

  • 1 Answer

SOURCE: whirlpool accubake oven will not heat after self clean cycle

I had the exact same thing...thermostat..

Posted on Jul 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool accubake wall unit oven fan stopped working


has a thermo fuse looks like a round 2 wire stat
send model # for location or bad fan or door micro switch

Dec 04, 2016 | Whirlpool Ovens

1 Answer

My whirlpool accubake oven works but it won't stop beeping


The keypad is failing and pushing buttons by itself intermittently, use your model number to search for a new key membrane.

May 12, 2016 | Whirlpool Kitchen Ranges

1 Answer

I have a whirlpool accubake wall unit oven Took out door to clean glass now I cannot put door back together


you have a couple of hinges you have to pull out at about 45 degrees then slide door down on them and shut door

May 05, 2016 | Whirlpool RBD245PRB 24-inch Double Wall...

1 Answer

When buttons are pushed, no beeping. even when timer is set to go off, no signal that the time has expired


If all other functions are working and you just lost the beep sound then you have to make this choice. The beeper is actually mounted on the main control board. If it has gone bad--the only way to fix it is to replace the complete main control board which is an expensive part. One thing to check in your owners manual is if your control has a way to change the sound level of the beeper. If yes--it may have accidentally got shut off if it has that type settings.

Jun 16, 2015 | GE JTP75 Electric Double Oven

1 Answer

My timer does not beep when time is up?


This sounds like either a defective piezo beeper or bad solder. Your range should beep as you set cooking time but not when you set the clock. If no beep is heard, then your timer and clock board have a defect, and should be covered under warranty if this is a new range. It is the same beeper device for the alarm, and is quite easy to hear.

Mar 24, 2010 | Whirlpool GR448LXPQ Electric Kitchen Range

1 Answer

Timer beeper failure on Whirlpool Gold oven/range oven


Most of the beepers I am familiar with are built into the main control clock board assembly. The only way to repair this is to replace the whole main control board, not a cheap part.

Jan 10, 2010 | Whirlpool GY396 Electric Kitchen Range

2 Answers

My Whirlpool Accubake super capacity 465 self-cleaning oven does not work. When started E1 -F5- appears on screen. Model# RF 386 PXGO. Serial# RJ0525903.


The E1- F5 error is a door lock error.

The control (TIMER) has likely failed in this instance - BUT...

Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.
You should disconnect power again for 15 seconds and reconnect and see if that helps.

If it doesn't cure the E1- F5 error hold the bake button in until E0- F2 appears in the display.
This is the error for a stuck button on the keypad and is the way to clear the memory of the electronic range control.

Sometimes these work, but if the control has failed it won't make any difference.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.%#FDG

Jan 02, 2010 | Whirlpool Accubake RF362LXTT Electric...

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Appliances - Others Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Irene Tulloch

Level 2 Expert

498 Answers

john h

Level 3 Expert

22486 Answers

Are you a Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...