Question about Sharp Microwave Ovens

Open Question

Door latch on Sharp microwave popped out when my husband caught it on his jeans. It doesn't appear to fit back in place. It seems to be too long to fit into the slots in the door. Any suggestions?

Well, Thank the good Lord nothing needed to be replaced, nothing was broken! I was able to fix it through the help of the video to open up the frame on the door. I was able to reattach the spring and reinsert the latch within about 10 min. I really really appreciate all of the answers that were given. Some were not helpful due to the fact that nothing was broken (SO Thankful!).

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
MicrowaveSvc

William Miller

  • 9179 Answers

SOURCE: Door latches to microwave broken

I assume you're talking about the spring that keeps tension on the door hooks (latch heads, as they're called by Sharp). When you shut the door, the "hooks" are held down by this spring to actuate the door switches. To fix this, you'll have to separate the door panels. You can download the service manual from my Web site. There's a loop built into the latch head assembly and sometimes the loop breaks. If so, you can drill a tiny hold in it and reattach the spring there. There may also be a loop on the innner door panel to hold the spring. That one can break, too. If it's broken, you'll have to find a way to secure the spring to the panel. If the panel material is thick enough, a tiny screw eye could be inserted, then epoxied overnight to secure it. I've attached a diagram to this message that should help you. If that doesn't help you, I have the service manual for the R1600-series microwaves on my Web site at: http://www.microwavedisplay.com/R1610.pdf Repost if you need more help.

Posted on Nov 15, 2006

Ad
MicrowaveSvc

William Miller

  • 9179 Answers

SOURCE: Sharp Carousel Microwave door latch stopped working door won't stay closed

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

We have *critical* safety & disassembly info at our site, linked here: http://tinyurl.com/yzjozk

We also have this full service manual at our site: http://www.microwavedisplay.com/R1480_R1481_R1482_sm.pdf

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

We're happy to help and we appreciate your thoughtful rating of our answer.

8b26738.jpg

Posted on Apr 18, 2008

MicrowaveSvc

William Miller

  • 9179 Answers

SOURCE: door latch on sharp 1480 microwave over the range oven

Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

We have the service manual for this model and have uploaded it to our site here to help you. You will need the free Adobe Reader to view or print it.

Normally you have to separate the door panels (as shown in the manual) and then you'll see the screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

The best place to order Sharp parts is Tritronics.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Aug 09, 2008

Anonymous

  • 619 Answers

SOURCE: Sharp Microwave model R-1850A door won't open

Hi ,there are two posibility to repair . 1. by ordering parts to the web site of sharp .
2. You may check from shop same type of part bring sample or in the appliances center near you.

Posted on Jan 14, 2008

Anonymous

  • 440 Answers

SOURCE: door latch on Emerson microwave oven

u will need new door asemble to relly fix it ok thx nick

Posted on Feb 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door doesn't latch


Can you move the latch in the door? This is spring loaded, maybe the spring is broken

Mar 09, 2013 | Maytag MMV1153A Microwave Oven

1 Answer

Sharp R-530E microwave door button doesn't open door


I doubt it and a service center will do it right and not cause more issues then most do it yourself people will.

Dec 23, 2012 | Microwave Ovens

1 Answer

Microwave door latch stuck


First of all, Do you have it on a level surface?

Jun 30, 2017 | Sharp Microwave Ovens

1 Answer

Hello My name is Mohamed. I have a sharp microwave oven model R-316FSU, I am having trouble opening the door. The latch seems to stick. How can I fix it?


Door catches.

One of the latches may be damaged or misaligned and is not lifting the other latch clear of the housing. Remove from any power source, remove the cover of the cabinet. Slacken off the clamp mechanism and ease the clamp over the guide to allow the door to open. When the door levers are in place, the door may be easily adjusted by slackening off the screws that clamp the door catch/actuators in place whilst holding the door closed and then tightening the screws. The rear of the door may be adjusted by slackening the lower door hinge screws and adjusting as required.
I hope that helps.

Mar 21, 2011 | Sharp R-316FS Microwave Oven

1 Answer

Sharp Microwave model R-1850A door won't open


buy a boddle of WD-40 and try spray some in the raded spots.Im not a big specialist in microwaves.hope it helps

May 10, 2009 | Sharp R-930AK Convection/Microwave Oven

1 Answer

Front door closes on a model R-1610-11-12 but light does not go out and microwave cannot be started up. Door does not seem to latch in place. In lower door latch inside the microwave I can see a plastic...


hi check that the door catch is locking into place maybethe locking mec is not engaging or triping the micro switch ,if it does n't trip the switch it won't turn light off and unit won't work
cheers grant

Oct 22, 2008 | Sharp Microwave Ovens

1 Answer

Door latch on sharp 1480 microwave over the range oven


Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

We have the service manual for this model and have uploaded it to our site here to help you.

You will need the free Acrobat Reader to view or print it.

The best place to order Sharp parts is Tritronics.

Normally you have to separate the door panels (as shown in the attached photo) and then you'll see the screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

0ff6f09.jpg

Sep 13, 2008 | Sharp R-1460 Microwave Oven

1 Answer

Door latch on sharp 1480 microwave over the range oven


Normally the problem is not the spring, but a broken spring mounting tab on the door latch head (hook) assembly or the inner door panel.

If it's the door panel, it's usually easier and cheaper to use epoxy and some kind of hardware to fashion a new spring mount.

The door latch head (hook) is easy to replace or repair if that's the issue.

We have the service manual for this model and have uploaded it to our site here to help you. You will need the free Adobe Reader to view or print it.

Normally you have to separate the door panels (as shown in the manual) and then you'll see the screws you need to remove.

Or you can watch a YouTube video (not a video I made) here that demonstrates how it's done.

The best place to order Sharp parts is Tritronics.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Aug 08, 2008 | Sharp R-1480 Microwave Oven

1 Answer

Sharp Microwave model R-1850A door won't open


Hi ,there are two posibility to repair . 1. by ordering parts to the web site of sharp .
2. You may check from shop same type of part bring sample or in the appliances center near you.

Jan 14, 2008 | Sharp R-1850A Convection/Microwave Oven

1 Answer

Directions to remove and open door panel to repair safety door latch.


You don't have to remove door to remove panel. Panel is held in by an outer plastic retainer which can be removed by carefully prying with a small screwdriver. I can be replaced by pushing it back in place after repair is completed. If you cannot open door from the outside, remove cover and you can see latches. Pry up on latch which will let door open.

Jul 28, 2007 | Sharp R-1610 Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Sharp Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...