Question about Frigidaire Ovens

Open Question

HOW TO REPLACE/INSTALL A FRIGIDAIRE STOVE/OVEN CONTROL BOARD

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 65 Answers

SOURCE: electric surge turned off the clock,oven but the stove top works

do you have both legs of the 220v? on the board see if you have 120v at L1 and L2. if you do then you have a bad board.

Posted on Feb 19, 2008

Ad
EllaWatson25

Ella Watson

  • 725 Answers

SOURCE: FRIGIDAIRE STOVE MODEL FEF316BSC I WAS BAKING

Don't worry! Your element probably blew out. It's no big deal. It happens. Call us for parts. 9728590929. It's really a simple repair, probably one of the easiest to do. Hope this helps!

Posted on Aug 24, 2009

Anonymous

  • 30 Answers

SOURCE: Display not working nor oven frigidaire gallery

needs a new control. Easy to replace.

Posted on Oct 23, 2009

2gunsally

  • 1 Answer

SOURCE: Frigidaire gallery stove, oven not working,

Morison,
The same thing happened to me about a week ago. I was preheating our electric oven, heard a very loud bang/pop. Checked and the oven had PF (power failure) I went downstairs and the breaker was tripped. Came back upstairs and to look at stove, the burners are working fine so I continued to preheat oven after a half an hour the oven was only slightly warm. Did you ever find out what was wrong?

Posted on Aug 07, 2010

TheMobilian

Dan Webster

  • 8220 Answers

SOURCE: 8/2011 stove is a whirlpool accubake

A small fuse is mounted in line with the power going into the control.
themobilian_2806.jpg

Service manual Page 22


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Posted on Aug 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have Frigidaire Gas oven FFGF3053LSF. We had a power surge & F13 code came on display. Power restored, clock works, F13 code is gone- but now a DR code comes on when I push bake or broil button


answered on another appliance site..

https://www.justanswer.com/appliance/9dp3z-tyler-i-frigidaire-stove-with-dr-error-code-oven.html
the F13 indicates that you have an EEPROM (Electrically Erasable Programmable Read-Only Memory) error in the clock control board of the range. You can unplug/turn off breaker to the range for 1 minute and then plug/switch it back on. This too may possibly fix the DR.. maybe?!

Feb 12, 2018 | Frigidaire Ovens

1 Answer

Frigidaire stove oven problem


Sounds like the control board needs to be tested for any communication errors and possibly replaced.

Aug 24, 2012 | Frigidaire Ovens

1 Answer

My stainless frigidaire professional series electric stove oven door is locked...i did not self clean it, but it is locked somehow...if i hold either the lock button, or the clear/off button for 15 seconds...


F1 is an EOC (electronic oven control) failure. The control is expensive. But before you go and buy this board, you need to find a diagram to see of this model oven lock is controlled by the EOC or by a micro switch. If you have a lock button on the board the you have to replace the EOC.

Mar 24, 2010 | Frigidaire 30" Self-Cleaning Freestanding...

2 Answers

Stove top working, oven is not


you need to check the heating elements and make sure you have continuity if you do then replace the control board

Jan 29, 2010 | Frigidaire FEB27S5A Electric Single Oven

1 Answer

I had the oven on this morning, heard a pop and the control panel went out.. stove top will heat up but the oven does not work.


You need a new Control Board. Take your model# to a appliance parts store.

It will cost about $200 and is easy to replace.

Nov 26, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Power went out. Back on now, monitor won't show on range. Can't set clock, so my stove won't work now. Any suggestions?


HI, you will need to replace the EOC/clock. the power surge has fried the chip set. Replace the control board.

Jun 22, 2009 | Frigidaire FEB27S5A Electric Single Oven

1 Answer

I HAVE A FRIGIDAIRE ELECRTIC STOVE,GETIN F2&F3 CODES


Hi, these codes represents a fault within the oven temperature sensor. Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.

Please rate and god bless:)

Apr 18, 2009 | Ovens

3 Answers

F2 f3 starts beeping when using stove or oven


F2
Oven temperature too hot
Check and replace oven temperature sensor (RTD).
F3
Open oven temperature sensor (RTD)
Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.
So i suppose its a sensor replacement is necessary.These are the fault code explanations by frigidaire.good luck with the machine.Please do post results and comments.

Apr 15, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

4 Answers

My kenmore electronic stove is having a beep with code F1 on the


Please use the chart to determine which stove you have. You will have to look at the model number. The first 3 numbers will be the series on the chart. In most cases an F1 error would require replacment of the electronic control. This part is commonly refered to as an EOC or ERC. However this type of repair is usually reserved for repair specialists.

KENMORE Range/Stove/Oven Fault Codes – 362 Series (General Electric)
F1 = Stuck Touch Pad Key - Replace Electronic Range Control (ERC).

KENMORE - 911 Series (General Electric/Roper)
F0-F1-FF = Failed transistor in Electronic Range Control (ERC).

KENMORE Range/Stove/Oven Fault Codes- 665 Series (Whirlpool)
F1-E0 EPROM Error - Electronic Range Control (ERC).
F1-E1 EPROM Error - Electronic Range Control (ERC).
F1-E2 U/L ERC Errors - Electronic Range Control (ERC).
F1-E3 Fuel Type Fail

Kill power 30 seconds-Cancel-Start/Enter-5 seconds-Should see “E” for electric-
“9” for gas-If code changes again-replace Electronic Range Control (ERC).

KENMORE - 790 Series Electronic Oven Control (Frigidaire)
F1 = Shorted Touch Pad = Electronic Range Control (EOC) Internal checksum error.
Runaway Temp = Replace Electronic Oven Control (EOC).

Kill power 30 seconds - if error returns - replace Electronic Oven Control (EOC).

Dec 15, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

Not finding what you are looking for?
Ovens Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Bruce Denton

Level 2 Expert

273 Answers

Alan Chouinard

Level 2 Expert

52 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...