Question about Sharp Aquos Televison & Video
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: TV won't turn on.
The problem is the digital main board if you can get ashop to order it for you its easy to replace yourself four screws and three or four plug in connectors.
Posted on Oct 25, 2008
its a power failure inside the ps3!!! You have to call sony to replace the system it will cost u 150.00 dollars unless ur still under warrenty goodluck because i had to get 3 systems from sony before i got one that worked just right
Posted on Mar 25, 2009
upon hitting the power button, the red light showing on the front of the tv should flash a couple of times, the screen should come on and the light goes off..the red "stand by " light stays on and we cannot get the screen to come up..needless to say, cannot get to the menu to change any display options...any suggestions?
Posted on Apr 13, 2009
Tips for a great answer:
Sep 27, 2015 | Sharp Aquos LC-45GX6U 45 in. HD-Ready LCD...
Feb 24, 2013 | Sharp Aquos Televison & Video
Feb 28, 2012 | Sharp Televison & Video
I had a similar problem. I had a 52"
RCArear projection tv. It
would do this when I initially turned on the television, but then after a few
"on/off, on/off, on/off" cycles it would stay on. Eventually it
started doing it more; until finally there was a spark and that was it. The tv
was dead.The bloggers called it "the blinking green light of death" (because
of green light on the panel).The
power board is going out.ALSO holding down the Input and Menu buttons afterward will give you
some diagnostic information via 2 sets of blinking indicator lights.
You may very well have issues with capacitors on this set being that it is or very similar to the V26 chassis. Since I have spare test lamps laying around, I would normally try that first. If the lamp still would not stay lit, I would then suspect the electrical chassis (capacitors). When I suspect the chassis, I can usually verify it by pulling it out and partially disassemble it and find blown capacitors
Jan 12, 2011 | Sharp Aquos LC-45GD4U 45 in. LCD HDTV
Oct 23, 2010 | Sharp Aquos LC-46D62U 46 in. LCD HDTV
Feb 01, 2010 | Sharp Aquos LC-32G4U 32 in. HD-Ready LCD...
Jan 22, 2010 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV
Jun 12, 2009 | Sharp Aquos LC-32GD4U 32 in. LCD HDTV
Sep 08, 2008 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...
52 people viewed this question
Usually answered in minutes!