Question about Sharp Aquos Televison & Video

Open Question

I have a sharp Aquos lc-50ub30u and the Screen is black. Tried soft reset, still not working. The light on the tv powers on but not image on the screen.

We took the back off and found on the power supply board, a brown spot near the top capacitor looks. After removing the board, it appears the mosfet mdd7n20c has fried. Will any 200v 5a mosfet be able to replace it? Or do I need to find a magnachip replacement?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 53 Answers

SOURCE: No POWER

How many times does the POWER led flash per second? (Dont worry about the OPC).

1x (steady constant blink) = Lamps or inverters
2x = Power Supply
3x = Main Unit

If i am reading it correctly, looks like the POWER led is flashing 2x, which means it is a power supply failure. Either way, your TV needs to have a board replaced, there isn't anything you can do to fix it yourself. Try locating your local sharp authorized service center to repair your TV (1-800-237-4277)

Posted on Mar 16, 2008

Ad

Anonymous

  • 2 Answers

SOURCE: Sharp Aquos LC-C3242U LCD screen go's black after power on.

I have (had) the exact same problem with my Sharp LC40C32U. I purchased it at CostCo 1 1/2 years ago. Because they changed their return policy I thought I was out almost a $1,000 but decided to ask them if they could do anything. Wouldn't you know they had an extended warranty that was still in affect. I called their service people and spent over an hour on the phone with them. After going through all the troubleshooting steps they arraigned for an in home repair (free of charge).The technician that came new exactly what the problem was and how to fix it. The kicker is no parts were bad, over time the 2 grounding points on one circuit board were not making contact correctly. He explained that the problem would be worse when the set was cold, as it heated up the grounding points would make a better contact. That's why it seemed to occur everyday first thing in the morning. He took the back off, removed the circuit board and cleaned the contacts. When he put it back together he tightened the screws down fairly tight, explaining that the factory does not tighten them enough which is why I (we) have the problem in the first place. This took all of about 20 minutes. I have not had any problems since. If you live in San Diego, CA the company that fix'ed my Sharp is Advanced Electronic Service.

Posted on Aug 29, 2008

Wondra

  • 1 Answer

SOURCE: Power Supply Burnout

Apparently there was a problem with some of the capacitors in these models. Your capacitor definitely is popped.

I had the same problem. The fuse was okay, but two capacitors were blown. One was at location C23 and I think the other at C17. I took it to a local electronics shop and they replaced and soldered the new capacitors on for me. It only cost $16.22. They were a 3300 µF and a 1000 µF.

Check out this information on this site as well.

http://forum.videohelp.com/topic340925.html

Posted on Nov 11, 2008

Jim Krause

  • 1779 Answers

SOURCE: power supply bad on Sharp Aquos LC - bad board - schematic to ID?

Buy the green light going on means Standby is ok. Next, would be to locate the plug coming from the main board to the power supply and find the post that says PO which means power on. With your meter on that post, press the power button as see if the reading goes High, if it does then the main board is able to turn on the power supply. Next, find the plug on the power supply that goes to the inverter( the long board on the side) remove it and see if you have 24 volts coming out of the power supply when you press the power. If you do, then the inverter board is bad, if you don't have 24 v, then the power supply is bad. There are NO diagrams available for these set other than a flow chart if you can find one. A regular svc tech does'nt need a manual for these anyway.

Let me know how you do Kathy ?

Posted on May 17, 2009

decarpentier

  • 2 Answers

SOURCE: sharp aquos model LC-32D40U screen goes black

The Sharp TV model LC32D40U / 41U "Black Screen problem" is a very well known issue. The inverter is losing ground contact which will prevent the back-light from staying on. The solution is to re-tighten six screws on the inverter board. You also would want to clean the copper contacts on then bottom of the inverter where the screws go through. Access to the inverter board will require some disassembly. Plan on taking at least three hours to repair. See the photo for the location of the screws. Use some "blue" locktight" on these six screws. There is actually a Sharp Technical Service Bulletin that describes these screws. Sharp wants you to replace these screws with a newer version. They cost at least $2.50 each! I think my method will work just as good using the "Locktight"_548.jpg_547.jpg

Posted on Jan 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monitor turns goes black and comes back on every 10 secs planar PX2210MW


The Planar PX2210MW is notorious for bad electrolytic capacitors. Specifically capacitor C804 on the power supply board. . This is a 1000uF 25volt capacitor. That capacitor was usually made by Hermei and it was purple. Normally, the top of a capacitor will be flat. When it fails, it will be curved upward and there may be some brown material leaking out.
If the monitor still will not work after replacing C804, the problem could be Q805 or Q806. These are located on the under side of the board. They are small black surface mounted chips. There are 8 pins on these chips. I have seen both AO4620 and APM4548A part numbers used. These chips contain a pair of MOSFET transistors. One transistor is n-channel and the other is p-channel. Look for a short in one of the transistors. I have repaired several of these monitors. C804 is always bad. How ever, in three cases, Q805 or Q806 was also bad 12c1ec2c-5a6d-4352-af31-150a0a92514c.jpg c9a53aae-2999-45c7-ad78-44ba51ac5a6c.jpg 795d93fe-9678-46c2-820a-767bea9babb0.jpg

Jul 25, 2013 | Planar PX2710MW Monitor

1 Answer

Viewsonic pc monitor model va 1912 the set is dead only voltage presents is on the filter capacitor. mplease can you help thanks


Do you get any power light at all? There are two normal failure points on that power supply board. The first is the 2 small 220uf capacitors as seen in the picture below. When these 2 capacitors fail and the tops bulge it causes the MOSfets to short out which blows the small fuse labeled F200 on the bottom of the board. When this happens the unit will show a power light on the front but no picture on the screen. The other failure point is the group of filter capacitors near the board interconnect to the driver board. Look for bulging tops on the capacitors. If you see the bulges then replace the group of capacitors and you should be good to go.


9_28_2012_2_22_38_pm.jpg

If you need the MOSfets and F200 fuse parts then they are available here:
http://www.ccl-la.com/catalog/product_info.php?products_id=28

Sep 26, 2012 | Computers & Internet

1 Answer

Loud Pop and the Screen went dead on a LG 42PX3DCV plasma TV. 5 years old so out of warrenty. I took the back off the tv and checked all the ceramic resistors and the resister on the Y-SUS board has...


Hi
A common problem for these is bad capacitors in the power supply, Remove the back from your Tv and look at the power supply on the left hand side.

You will see roughly around 9 x capacitors that are bulged / domed shaped on top usually these are valued at 3300uf 10V any that have bulged or leaked a brown like substance should be changed.
This will cure the problem as they overheat being sat next to a heatsink that gets very hot!
Try and change them for the same 3300uf but a higher voltage.
Hope this helpout in solving the problem....

May 31, 2011 | LG 42PX3DCV 42 in. Plasma EDTV

1 Answer

I have a few year old 47LG50 and the other day I turn the tv on and there was just dark color on the screen. I tried to turn the tv off from the remote and the tv power button but had to unplug the tv. It...


Good day!

That problem is usually happen when the power supply got partially defects.

Follow this simple procedure on how to repair it on your own:

  1. Open the back cover of your TV by removing all screws at the back.
  2. After you open the cover,the internal parts of TV reveal such as power supply board system board and inverter board
  3. Next,look at the power supply.It is the one that connected on the power cord and its usually compose of common parts like capacitors,resistors and power transistors with heat sink.
  4. After you found the power supply board,try to look the capacitors and see the actual appearance of it.If the capacitors looks like leak or bulge on top that is defective replace it with the same type,ratings and value.Because the leak capacitors can cause of voltage drop and power failure.Use soldering iron and soldering ****** to replace it and be careful to do that,because capacitor have a polarity (+/-) terminal.
  5. Finally,If you already replace the bad capacitors with the new one.try to plug in your TV and power it ON to test it.
I hope this solution will be helpful.Thank you and good luck.

Apr 26, 2011 | Televison & Video

2 Answers

I also have an Athena ASP4100 sub woofer which blew the fuse on the circuit board and when I replaced the fuse, it just blew it again. As an electrician, my understanding would be the circuit board has a...


You should look at the circuit board for the power amplifier and check for any leaking or bulged electrolytic capacitors. If this speaker uses the circuit boards made by AMI (such as most JBL and Mission sub woofers around 1999-2001 vintage) they had a lot of problems with this as well as bad modules. Google for the module S53AMI and you will find lots of info if this is what you have in that Athena.

Feb 21, 2011 | Athena AS-P4000 Subwoofer

1 Answer

TV wont come on


I just fixed my 50pf7220a phillips last nite....i took the back off and found two bulged capacitors on the power supply board...i tried un soldering them in order to repleace them but could not get them hot enough to melt the solder.....so i called this number (812) 867-7583 to get a new power supply......tell them the model number of the tv and they have the power supplies in stock mine was 129.00...the power supply is the large circuit board near the center of the tv.....its easly to replace....lay the tv screen down on the floor remove the large back ....about 70 screws....look for the slighty bulged capacitors...on the power supply board.....label all of the connectors to the power supply board and make a map of where they go .... remove the 8 screws that hold the power supply board in place.....get the new board and rehook....making sure that all connectors are tight.... please use two people to move this tv its top heavy....good luck if you have questions please post here and i will try to answer.....I am not a tv repairman but just a concerned consumer.....i understand that capacitors will go out once they reach 2000 hours.....

Feb 07, 2010 | Philips Televison & Video

7 Answers

Cyberhome dvr1200 wont turn on


dave727,

C14 & C20 are in fact 2200uf @ 10VDC. C15 is 1000uf @ 10VDC. After reading these posts, I took a closer look at the ps board, and sure enough C20 top is slightly ballooned out. We'll be replacing all 3 with 16VDC caps shortly. BTW, the high pitched whine is from the power supply because it's a switching supply and creates some HV.

Thanks for the input!

dondd

Jan 13, 2008 | Cyberhome DVR 1600 DVD Recorder

2 Answers

Power Supply Burnout


Apparently there was a problem with some of the capacitors in these models. Your capacitor definitely is popped.

I had the same problem. The fuse was okay, but two capacitors were blown. One was at location C23 and I think the other at C17. I took it to a local electronics shop and they replaced and soldered the new capacitors on for me. It only cost $16.22. They were a 3300 µF and a 1000 µF.

Check out this information on this site as well.

http://forum.videohelp.com/topic340925.html

Dec 28, 2007 | Pioneer DVR-225 DVD Recorder

3 Answers

I have a rca hdtv r52wh77 1 year old ,i have color problems ,i cant get to the convergence set up ,please help.thks


Try looking at the main board very near the flyback and you should see 3 fuse links (they look like hard capacitors) one of them is probably open causing lack or power to the convergence board by way of the ribbon seated close to the vertical output IC

Dec 22, 2007 | RCA P52937 52" Rear Projection Television

2 Answers

LCDTV turns itself on and off


You could order a power supply yourself and install it, but if the tech on the phone was wrong it would cost you a lot. Better to at least inspect it yourself.
If you are not familiar with electronics it could be tough to pin down the fault. Over-the-phone diagnoses are really only 50"50.

It COULD be any of the following:

Power Board
Main Board
Control Board
Control Board Wiring Harness
IR Receiver Board and or harness.

Visually inspect the power board for any capacitors that are vented or have shrunk cases on them. Check it for brown spots on the board itself. If there are brown spots you may have an overheating component. If it's s discrete component like a resistoror diode you can replace it. If it's an IC, you may have trouble finding it and might end up replacing the whole supply.

On the main board you can check all the connectors to make sure they are plugged in all the way. Make sure there are no overheating components.

On either of these boards, if you find dark brown spots you might want to consider replacing that board.

You can replace any bad capacitors you find easy enough.

Our shop would charge $75 labour and the cost of the part for a repair like this. A few hundred dollars for a circuit board is not unusual.

Oct 10, 2007 | ViewSonic N2750w 27 in. HD-Ready LCD...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...