Question about Frigidaire Ovens
This is a car forum, not an oven forum. Contact the manufacturer for a fix.
Posted on Mar 23, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
have your electronic timer sent for repairs, go on internet at ApplianceTomers.com
Posted on Nov 11, 2008
Whithout knowing the model number in general it takes several hours for the cleaning cycle. My oven takes approx. 4 hours to complete a good cleaning. On my own oven, you can set the timer for as long as you want. Do you have an owners manual? If not, you can find one here...........
Posted on Mar 21, 2009
I replaced the C3 capacitor on the circuit board and works fine. This was mentioned in a prior post and took 5 minutes and was under $5.00 for the part.
Posted on Mar 21, 2009
I had the same problem and found the solution on-line.
Replace the C3 capacitor on the dispaly module. (100 UF, 35 volt, high temperature)
The local Jenn Air dealer wanted $211 for a new display module.
I purchased a Cap from a local electronics supply store for 79cents.
The only problem is that you need to have a soldering pencil/iron, a solder ******/wick and a small amount of solder.
Steps I had to take on my oven:
- Flip the AC breaker supplying the oven to off to be save
- remove 3 screws on top and 4 on the bottom of the display panel
- gently pull out the display panel and unplug the 2 cables to the display
- unclip the ribbon cable to the display module
- unclip the module itself by pushing on the 2 black tabs
- locate C3
- unsolder C3 and replace with new Cap- keeping the polarity strip the same as theh old Cap
- reasemble in reverse order.
It took me all of 20 minutes. It may sound difficult but is very easy if you have the tools
Posted on Jun 15, 2009
You need to replace the C3 capacitor on the control board
You can replace only the C3 - it is 68uF / 35V and you can go to Radio Shack and get their part # 272-1028 - 100uF/35V one. It takes all but 10 minutes to re-solder the new one in place
Posted on Jul 10, 2009
Tips for a great answer:
Nov 21, 2013 | Frigidaire 30 in. Electric Gallery Series...
Aug 07, 2012 | Frigidaire 30 in. Electric Gallery Series...
Aug 08, 2011 | Frigidaire 30 in. Electric Gallery Series...
Feb 20, 2018 | Frigidaire 30 in. Electric Gallery Series...
Apr 23, 2010 | Frigidaire 30 in. Electric Gallery Series...
Oct 22, 2009 | Frigidaire 30" Self-Cleaning Freestanding...
Mar 20, 2009 | Frigidaire 30 in. Electric Gallery Series...
Jun 07, 2008 | Frigidaire 30" Self-Cleaning Freestanding...
Apr 21, 2008 | Frigidaire 30" Self-Cleaning Freestanding...
53 people viewed this question
Usually answered in minutes!