Question about Cisco Computers & Internet

Open Question

How to I retrieve my voicemails from a remote phone. my system is Cisco Unified IP Phone 6921, 6941, 6945, and 6961

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: Ethernet Disconnected message in POE 7941G IP Phones

the first problem will be to check or replace the cable that you use to connect the phone or check the jack that you use

Posted on Jul 12, 2007

Ad

Anonymous

  • 1 Answer

SOURCE: unable to connect jabra t5330 to a cisco ip phone 7941G headset jack

You can solve this by connecting your phone inline.
On the back of the phone where the phone handset plugs into, plug one end of the jabra headset wire & connect other end to the 2nd position (marked by phone & handset). Now plug the handset wire from Ip phone to the 1st position (marked by handset) in the jabra headset. Now you are good to go.

When the phone rings lift the phone handset and answer it with your jabra headset. You can't use jabra with 7941 without lifting the handset on phone.

Posted on Jan 28, 2009

Efrem Jara

  • 27 Answers

SOURCE: "flash busy" message when trying to retrieve voicemail messages

It is telling you that the voice mail ports are busy and can not take another call in to the voice mail system. If the port the does not clear up after a min or two then reset the voice mail system . Unplug the power cord from the wall and let it set for a min , then plug it back in and wait about 5 min for the system to come back up , that should free up the ports .

Posted on Apr 17, 2009

Tom Torre

  • 279 Answers

SOURCE: Retrieve deleted message on voicemail

No, sorry, you can't. The recording is digital and once it's gone it's gone.

Posted on Sep 19, 2009

Joshua

  • 121 Answers

SOURCE: CISCO IP PHONE 7941 -add background images (user preferences,

See Cisco's user guide regarding template modification and customization at http://www.ciscosystems.am/en/US/docs/voice_ip_comm/cuipph/7960g_7940g/7_0/sip/english/administration/guide/7960usrS.pdf

Posted on Feb 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to access Cisco Unified Communications Manager Administration ?


from what I have researched on the web you need to download the Cisco unified Communications Manager software on to the P.C you wish to use to access the server via the web browser. it states you open the software via a web browser. The reason being the Voip server has no software on it.
http://www.cisco.com/web/developer/cucm/content/download.html

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/CUCM_BK_A09578D7_00_admin-guide-cucm-imp_1151/CUCM_BK_A09578D7_00_admin-guide-for-cucm-1105_chapter_01.html

Apr 20, 2016 | Cisco 7940 IP Phone

1 Answer

We are going to order CISCO2911-v/k9 voice bundle, and we are not sure if we suppose to order user license in order to register IP Phone, or the voice bundle itself has the license


As to the CISCO2911-v/k9, the Unified CME and SRST voice bundles include 25 CME or SRST seats across all the platform bundles. If you wish to add additional users, you need to order additional feature licenses to add up to the desired user count. Finally, if you are ordering Cisco Unified Communications Manager Express, you need to purchase IP phone licenses for each phone that you will connect to the CME system.

Apr 13, 2015 | Computers & Internet

3 Answers

What collaboration capabilities are available on the new Cisco 2900 and 3900 Series routers?


According to my experience and knoledge: the Cisco 2900 and 3900 series platforms have collaboration feature parity with the Cisco 2800 and 3800 Series platforms, so all of the following collaboration capabilities and solutions are present:
• Cisco Unified Survivable Remote Site Telephony (SRST)
• Cisco Unified Border Element
• Time-division multiplexing public-switched-telephone-network (TDM PSTN) and private-branch-exchange (PBX) gateways
• VoiceXML contact-center gateways
• Cisco Unified Communications Manager (UCM) media resources (allowing conferencing, transcoding, and Media Termination Point [MTP])
• Resource Reservation Protocol (RSVP) Agent
• Cisco Unified Communications Manager Express (CME)
• Cisco Unified SIP Proxy
• Gatekeeper

Cisco 3900 Series Routers

Jun 25, 2014 | Computers & Internet

1 Answer

Cisco expert


I think you're confused. IP Communicator is the unified communications client (IM and Phone) It is looking for a capatible headset so you can use your softphone. This software is not your VPN client. There are two different cisco product: one for your VPN and one for your phone. If you're trying to ocnnect to an old-style Cisco VPN, your IT dept will have to configure that with a certificate.
Solution from Cisco: http://www.cisco.com/en/US/products/sw/voicesw/ps5475/products_tech_note09186a00809b6c40.shtml
This behavior is observed when a user attempts to install or use the IP Communicator on a system that has different names for the Playback (wave out) and Recording (wave in) devices.
In order to overcome this problem, perform one of these tasks:
-Use a USB headset that is recognized by the IP Communicator.
-Upgrade to the latest version of the IP Communicator

Nov 07, 2013 | Arris SURFboard SBG900 Wireless Router...

1 Answer

I cannot make external calls


What type of phone system are you using? Cisco Callamanager, UC500, etc...

You may have a NAT or firewall issue which is blocking outbound calls, need more info to try to help.

<a href="http://www.ciscopowercube.com">Cisco CP-PWR-CUBE3</a>

Dec 10, 2012 | Cisco UNIFIED IP PHONE 6921 CHARCOAL STD...

1 Answer

How to reset 9971 cisco phone to factory default


Hello,

You can do that by pressing the Applications button on the phone and choosing Administrator Settings. From the Administrator Settings menu, unlock phone options, then choose Reset Settings > All Settings.

I hope this helped you.

Oct 06, 2011 | Cisco Unified IP Phone 9971-Charcoal...

1 Answer

I have added cisco 7916 expansion module to 7965 cisco phone.Now when i started the phone,phone works but expansion module screen shows cisco logo and lights continuously flash.


I know it may be late (definitely late), but have you defined in the CallManager, that your phone has a "side card"? If CallManager does not know that it has to push an additional firmware to a particular phone, it will not work.

Good luck,

Mike ' CCNP, CCVP, CCSP, CCDP, MCSE, etc.
Headset Adapter Co.
Headset Adapters for office phone system

Mar 21, 2011 | Cisco Systems - Unified IP Phone...

2 Answers

Cisco IP Phone 7940 and 3com nbx as 3rd party SIP phones


Here are the instructions for configuring these units for 3cx

http://www.3cx.com/sip-phones/cisco-7940.html

http://www.3cx.com/sip-phones/polycom-soundpoint.html

Since the 3cx softphone worked well, I don't see why you couldn't configure each as for 3cx and make them work as well.

Dec 09, 2009 | 3Com NBX 2102PE IP Phone

2 Answers

CISCO 7912 Ip Phone,Red lights are continuously on.


Well, in most Cisco VoIP phones those lights are used to tell you if you have a voicemail. Have you checked your vm and cleared any new ones? This might be your issue ;)

Oct 14, 2008 | Cisco 7912G IP Phone

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...