Question about Cuisinart Coffee Makers & Espresso Machines
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Turn the function knob to Auto Off
Hold down the hour button til you see the clock display blinking
you can then use the Hour and Minute buttons to program how long you want the coffee maker to stay on.
You can choose from 0 minutes (seems to be what you have it set on now) to 4 hours.
Posted on Nov 15, 2008
SOURCE: cuisinart Grind and Brew 10
Replacement time. a certain percentage of thse have this problem. There is a small, non-replaceable tube in the inside toward the bottom that has become melted/damaged.
Posted on Dec 17, 2008
The hopper between the burr grinder and where coffee chutes into the filter is jammed with coffee powder...
First, take out the filter holder and carafe, and place a freash empty filter on the pot base to catch stuff.
Next, take out the beans holder and look for the release lever in the lower left section. Sliding it to the left slides open the door, where you'll probably find loads of powder. You can poke your finger through to get the majority, then use the cleaning brush to get it really clean.
Thanks what fixed mine! (I notice I have to do this about once every few months.)
Posted on Aug 03, 2009
I tried a solution someone posted on this site back in Dec and it worked, give it a try: "I called the company about the "shutting off after a brewing cycle" problem and they had me turn the dial to "auto off" and set the time to two hours. You do this by holding down the "hour" button until it blinks, and then press it again until you get the desired hours that the warming plate will be on. Hope this helps."
Posted on Jun 07, 2010
I have experienced this same problem. You have to pour the water directly into the holding bay, avoiding the edges. I think water gets stuck around the rim, it just steams over the edge, or drips down the front and back onto the counter. I don't know why, but it happens, so just make sure you pour the water directly into the bay avoiding edges.
Posted on Nov 27, 2010
Tips for a great answer:
Sep 03, 2017 | Coffee Makers & Espresso Machines
Sep 16, 2012 | Keurig B30 Mini Coffee Maker
Nov 02, 2017 | Cuisinart Keurig B50 Single Cup Coffee...
Nov 11, 2010 | Cuisinart Grind and Brew 10 Cup Coffee...
Nov 11, 2010 | Cuisinart DGB-600BC 10-Cup Coffee Maker
Jan 06, 2010 | Cuisinart Grind and Brew 10 Cup Coffee...
Aug 18, 2009 | Cuisinart Grind and Brew 10 Cup Coffee...
Jul 29, 2009 | Cuisinart DCC-1200 Coffee Maker
Jan 11, 2009 | Cuisinart DCC-1200 Coffee Maker
May 04, 2008 | Cuisinart DCC-2200 14-Cup Coffee Maker
121 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 3 Expert
Level 3 Expert
Step 2: Please assign your manual to a product: