Question about GE Ovens

Open Question

Ge pss26msrbss replaced control panel in back, still not working

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a ge truetemp double oven model jkp27boa2bb. The control panel does not work. Turn the temp knob for lower oven and upper oven lite comes on. Is the control panel bad? Lower oven heats up only


The heating element on the top part off oven might be bad or a fuse that's located on back of oven either on or behind back panel.

Mar 16, 2016 | GE Ovens

Tip

I get error F7 on GE oven.


Hi.

F7 on GE ovens means that there is a poor contact to keypad detected. When this happens the problem is either keypad or control panel.

Problem is fixed testing keypad and control assembly and replacing the faulty part.

Here the procedure to test the parts:

Hold down the CLEAR/OFF button on pad.
Disconnect the ribbon cable connecting control panel to pad and wait about one or two minutes to see if the code comes back.

If the code comes back, then you likely need to replace control assembly.
If the code does not re-appear on display, then the problem is with the key pad. In that case replace the key pad.

The procedure is only indicative. In case of faulty control assembly procedure may not be a definitive test. In that case replace the control pad first.

To find parts and diagrams for your appliance, enter the model number in the links listed below:

Where do I find parts and diagrams?

Regards.

on Aug 10, 2010 | GE Profile JTP18 Electric Single Oven

1 Answer

!0 year old GE Profile Double Oven. Control Panel repaired but oven is again not working with a "F7" mal function indicator on panel. Model # JT 950 S0A3SS


Hello & Welcome to FixYa

F7 error code is displayed when the clock assembly/electronic range control (ERC) goes bad and needs replacement. Sorry for the bad news....but hope you understand. Please get back to me if you have any other questions.


Kevin

Jan 03, 2011 | GE Ovens

1 Answer

I have a GE built in oven Model JKS05B0WPBB and getting an F7 blinking light. Can you give me some guidance? Thanks.


Hi.

F7 on GE ovens means that there is a poor contact to keypad detected. When this happens the problem is either keypad or control panel.

Problem is fixed testing keypad and control assembly and replacing the faulty part.

Here the procedure to test the parts:

Hold down the CLEAR/OFF button on pad.
Disconnect the ribbon cable connecting control panel to pad and wait about one or two minutes to see if the code comes back.

If the code comes back, then you likely need to replace control assembly.
If the code does not re-appear on display, then the problem is with the key pad. In that case replace the key pad.

The procedure is only indicative. In case of faulty control assembly procedure may not be a definitive test. In that case replace the control pad first.

To find parts and diagrams for your appliance, enter the model number in the links listed below:

Where do I find parts and diagrams?

Aug 10, 2010 | GE Ovens

1 Answer

GE stove JSP40BB has digital readout all lit up. turning off power did not reset it.


Unplug the range.
Open the control panel to access the clock control.
Remove the wires from the control for 30 seconds.
Replace the wires on the control and plug the range back in.
If this does not clear the control you will have to replace the control.

Jul 24, 2010 | GE Ovens

4 Answers

I have a GE JTP70, The Plastic over control panel bubbled up.


Mine did the same thing...and believe me it even looks worse over time....look online it happened to a lot of people....GE won't do anything about it....it is a defect but they won't own up to it......They just want you to keep replacing the part, which cost a fortune. Mine oven cost over $1000 and I am stuck with a nasty looking piece of garbage in my brand new kitchen......can't afford to buy a new one.........I Will NEVER BUY ANOTHER GE PRODUCT AGAIN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Feb 19, 2010 | GE JTP70 Electric Single Oven

1 Answer

My GE double oven JKP26GP broiler burned out (burned a hole right thru). The keypad immediately went blank and the keypad controlled top unit isn't working now (top unit only - bottom is fine). Will...


I'm afraid I don't know how to help you get a new control panel (part #WB36K5065 is no longer available). But we have the same oven and a similar problem. Our control panel works just fine, but the face is melted from a recent mishap (small fire in the upper oven while broiling), so the plastic face of the control panel looks awful and needs replacing. If you decide to replace your oven and would like to sell the front face to your control panel we'd love to purchase from you.

Nov 21, 2009 | GE Ovens

1 Answer

Is it easy to replace the keypanel of the GE


Hello, The simple answer is yes it's not too hard...Normally you have a couple of screw located underneath the control panel. In most mordern ovens today they just consist of 2 components, the EOC (Electronic oven control) and the touch pad which basically cosists of everything you see(the whole panel). If you are replacing the touchpad..remove screws holding old panel in...pull wire harness from control board (dont worry where they go because the will only fit in one place) remove tape from EOC and relocate the control board to the new touchpad panel...reattach wire harness and tape in the new touchpad panel and hook back on oven ..screws in and your good to go. if replacing the control board (EOC) drop touch pad panel from oven and pull wires install new control then reassemble..easy!. One thing i would check though before purchasing the part, check to see it is the touchpad and not the control board...Here is how to do it...shut breaker off...pull out control panel...remove ribbon for key pad from EOC the re install panel..go switch breaker back on. leave for 24 hours..if within the 24 hours the error messages come back it's the EOC that is bad, if the error messages do not come back then you can be sure it's the touchpad. I would check this before buying the part since they are expencive and offten non returnable. Good Luck!! If you have any other questions or concerns please feel free to comment again. Thanks for using Fixya!! Mike

Jul 24, 2009 | GE Profile JKP56 Electric Double Oven

1 Answer

Oven comes on for no reason followed by the start beep


yes you can kill the power and lock out the box with a pad lock for safety. the panel is attached by screws usually on the bottom of panel. lower and seperate the control panel ribbon from the erc (electronic range control). without removing any other components leave ribbon loose and replace panel. turn power back on. if the beeping does not recur, the control panel probably has a stuck key. if it does resume the erc is faulty

May 17, 2009 | GE JKP20 Electric Single Oven

3 Answers

F3 Error


This is due to a Defective control board..You have to get it replaced..

Oct 15, 2007 | GE Profile Advantium SCB2001KSS Stainless...

Not finding what you are looking for?
Ovens Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...