Question about Home Security

Open Question

Why does my yi not consistently record to my sad card when motion is detected. Sometimes for long periods of greater than 30 minutes.

Posted by on

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 27 Answers

SOURCE: Reciever Not Recording

Turn off the receiver, unplug the receiver, wait 30 seconds, plug it back in, and go through the setup again. This hard restart clears the memory and restarts the DVR software(clears any software glitches) This should fix this problem assuming that your satellite signal is good. Check that during the resetup. Most transponders will show between 70 to 100 signal strength. (Minimum is 70 for error free reception) Several transponders will show 0 as they are dead on the satellite, and not a receiver problem) If your satellite signal is in the 70's or less, you either live in Maine or you may need to realign the dish or something is blocking the signal like a tree or bush growing that is partially blocking the signal causing the signal to drop out(partial recordings)

Posted on Mar 09, 2007

Ad

Anonymous

  • 275 Answers

SOURCE: recording limited by error-lg viewty

Hmmm. Yes your 2GBmemory card is more than enough to do the job, but.. your phone is freezing. Well, just how many pictures and video files do you already have saved on that memory, remember the more files you store, the slower the phone is going to respond....My recomendation is to remove the old files, transfer to your computer if you dont really need them on your phone, and defenetly want to turn your phone off and take your battery out for at least 5 mins. this will refresh your phone and keep it working in optimal condition.. Good luck and enjoy the Viewty

Posted on Dec 13, 2008

abp20

  • 1218 Answers

SOURCE: will only record for about 17 minutes. should

Quality of recording can have a big effect on recording time....download instruction manual at www.olympusamerica.com

Posted on Oct 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there, my Motorola Hubble is pointing out of my window to my car and front door but it’s not sending me notifications of movement ie when postman put mail in letterbox ?


Change Cameras' Placement or Pointing Angle Security cameras with built-in PIR motion sensor, such as Arlo cameras could see cameras do detect motion but fail to record or capture movement. Or cameras can't detect or record motions through glass or window glass panel.
In such cases, avoid placing motion detection security cameras behind the glass window especially cameras with a PIR motion sensor; do place wireless motion sensor security cameras closer to a WiFi router or hotspot.
The object from afar is relatively easier to be miss out, so don't expect security cameras to pick up every movement within its field of view. Focusing on strategic areas for motion detection helps achieve maximal peace of mind as well as reducing unwanted false alarms.

https://reolink.com/security-camera-motion-detection-not-working/

Feb 21, 2018 | Motorola Computers & Internet

1 Answer

HOW DO I GET MOTION DETECTION TO WORK?


Are you sure the cameras are capable of motion sensing and make sure that you do not need an additional control cable to the camera to make that work.

Jul 17, 2014 | First Alert Home Security

1 Answer

PIR Sensor problem


This is normal. it takes several minutes after power up to adjust to the environment that it is in. Then the motion will only transmit a signal to the alarm panel every few minutes. This is to conserve battery life. Let it sit idle for more than 3 minutes after arming (do not trip the sensor during this period). Afterwards, the first trip should be instant and that should be all you need.

May 28, 2013 | Honeywell | Ademco LYNX Plus LYNX Plus

1 Answer

User manual for fl09sbk light


It appears this device is rate 10 amps at 230 volts = 2300 watts.
Use at least #14 wire and 15 amp breaker.
Connect wire at connection point on light.
Unit appears to have a transformer, and might make humming sound.
There is override located somewhere on unit. Possibly as a button on the motion sensor

If infrared motion detector requires separate wiring connection, then use following wiring illustration:
http://waterheatertimer.org/images/How-to-wire-motion-sensor-230V.jpg

Motion sensor will probably have 2 settings.
1st setting for sensitivity, so it will not activate when cat walks up driveway.
2nd setting for time duration, selectable from 30 seconds to 7 minutes

ML FL09SBK IP44 36W Fluorescent PIR Floodlight c/w Lamp

IP44 Low Energy Floodlight c/w PIR & Override.
Black finish.
T4 twist and lock lampholder.
36 Watt 6500k T4 spiral compact fluorescent lamp included.
(replacement lamp - product code FL09L).
Electrical termination via 10 Amp connector block within secure enclosure c/w cord grip.
PIR detection range of 12 meters at 2 meter height from ground.
Detection arch of 160 degrees.
Time range 30 seconds to 7 minutes.
Manual override.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Nov 12, 2012 | Woods Outdoor Lighting Timer

1 Answer

Trying to set switch for 5 minutes , and i only get 30 seconds or 15 minutes


Which brand and model number specifically?
Leviton: 1-800-824-3005
Leviton Decora manual says:
"PR180 operates by detecting motion (such as body heat) within its field-of-view (area of coverage) and automatically switches lights ON. When motion is no longer detected, lights remain ON for a selected time and automatically switch OFF.
Adjustable light and time-delay controls are located on the front of the device."

The manual is not specific about set times.

In any case, the device has off-delay timing circuit, so once infrared heat is no longer sensed, the delay period begins, and once the delay period expires, the device is switched off.
Delay timing circuits are common for many home and industrial applications.
As a general rule, delay timers can be set for different time durations, however the Amazon page that sells PR180 product does not specify available time settings either.

Legrand RW3U occupancy sensor spec sheet says adjustable time delay 15 seconds 5 minutes, 15 minutes and 30 minutes
http://www.amazon.com/Legrand-RW3U603I-Occupancy-Vacancy-Decorator/dp/B005FMLL5G

Delay switches
Here is manual delay-time switch Tork SS20 SS13 where you can 'fine-tune' the delay circuit, but my experience is that exact 5 minutes is not easily set:
http://waterheatertimer.org/images/Paragon-ET-series-243.jpg
GE 15318 switch offers 5 minute, but there is no guarantee that you can get 5 minutes exactly:
http://waterheatertimer.org/images/GE-15318-countdown-timer.jpg

My conclusion is that there are very limited delay-time choices with this model number, or device is defective and suggest to call Leviton.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Sep 23, 2012 | Leviton R01-PR180-1LI Decora 180 Degree...

1 Answer

How do I use my compro ip540 surveillance camera to record a video without using my pc?


Hi~
You can use SD card to record, but SD card recording just provide motion detection recording.
If you need nonstop recording, there is only PC or NAS could apply on.

Jul 04, 2011 | Compro Technology Ip540 Ptz Megapixel...

2 Answers

Sentient 250GB DVR-RW CCTV N63HH - recording for longer peroids


Just reduce the frame rate slightly on each camera or the record quality and it will increase the data retention period.

Jun 14, 2010 | Dome 4 CCD CCTV Camera Surveillance...

1 Answer

Shuts itself off periodically


If the period of time in question is reasonably consistent - say 45 minutes after powering up it shuts off - you could be suffering from an overheating issue inside the unit. Temprature sensors can override manual operation and shut the unit off to avoid greater damage (or even a fire) occuring. Have the TV serviced.
If you find it happens at random time intervals from cold this is less likely to be the case and it could be relative to the mains power supply going to the TV. If you suffer from 'dirty power' (power that dips and surges instead of giving a consistent voltage) this could also cause an automatic shutdown condition within the TV. This could happen at any time after the unit has been turned on. An unterruptible power supply (UPS) would help with that.

Aug 18, 2009 | Vizio L32 32 in. LCD HDTV

1 Answer

Powers down


Unplug it for about 30 minutes then plug it back in and try. If it starts giving you less and less might be the power board in the machine going out. Call the support line that is located in the front of the unit.

Oct 14, 2007 | Philips Magnavox MWR10D6 DVD Recorder

1 Answer

Camera recording software


how can i get it . solve my problem

Aug 30, 2007 | D-Link DSC-350 Digital Camera

Not finding what you are looking for?
Home Security Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Security Experts

Brad Brown

Level 3 Expert

18136 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...