Question about Bertazzoni Kitchen Ranges

Open Question

Bertazzoni hood model KU30PRO1KV I removed the hood for a kitchen remodel. Removed the plastic grills and fan for cleaning and now it will not work. What did I do wrong and how can I fix it? Fan spins as if out of balance. Very noisy.

Posted by on

Ad

6 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Removable grilles for easy cleaning?

We just figured this out ourselves. There are four (4) screws on the back of each fan that when undone it releases the grill for cleaning. But the fun part is getting the screws back in to the little holes. But all in all we got it clean...

Posted on Aug 21, 2008

Ad

Anonymous

  • 2 Answers

SOURCE: remove grille on fan fan

I have taken mine outside before and used a leaf blower. Blows all of the dust out and works great on the areas that cant be reached

Posted on Jan 04, 2009

Anonymous

  • 1 Answer

SOURCE: need to remove gril to clean blade and grill

You can remove it by pressing the clips. I used a flat screwdriver as there was no way my thumb would fit in there. But it worked like a champ with the screwdriver. I pressed two clips and it popped and then I could simply lift the grill away from the fan blades.

Posted on May 06, 2009

Bob B

  • 272 Answers

SOURCE: Trying to remove service grill for Nutone QT140L combo fan/light

Yeah it takes a good push and a sharp tug to get them off if they've been there for awhile, they get greasy and stick, They sometimes bend a bit coming out but they're easy to staighten after you clean them. and yes they are one part.

Posted on Jun 02, 2009

Aaron Kilgore

  • 2 Answers

SOURCE: I have a noisy cooling fan. I have cleaned and

Is the area between your fridge and freezer smoking hot? Can you smell the rubber seals melting? Does your fridge squeak like crazy? You have an issue with your condenser fan. You can save about $50 by fixing the fan motor yourself. I'm no engineer but this was an easy fix. 1) Unplug the fridge. 2) Take off the lower back panel covering the condenser and fan. 3) Unplug the fan (on the top left from the fan. 4) Slide the fan out of the bracket 5) Take the fan blade off. (This will take the most time and TLC, it is glued on) 6) Take the two screws out of the back of the housing. **The fan motor should be free of the housing and blade** 7) Remove the two screws from the fan motor housing. 8) Pull the shaft out of the motor and clean all parts with some oil and a rag. 9) Make sure all moving parts are well oiled then put the shaft back in the motor housing. 10) Replace the motor housing screws 11) Replace the motor into the fan housing and replace the screws. 12) Slide the fan blade back onto the shaft (I used some super glue to help hold it in place) 13) Slide the fan housing back into place 14) Plug the fan into the socket 15) Plug in the fridge to make sure your fix worked (it may take a minute to kick on) 16) Replace the lower cover

Posted on Aug 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung microwave oven model SMH1622S exhaust fan will not shut off high fan and low fan will switch but the off dose not work.


On model SMH1622S, I would first check the hood TCO. It should be normally open (infinite resistance on a continuity test). If it has shorted, then the hood vent exhaust fan will stay on.

If that's good, then it is probably a shorted vent relay on the control board, which I can repair.

Details are here, where I also have a video showing how to remove the grille and controller assembly in about 5 minutes.

If you have any trouble getting the grille off once the screws are removed, slide the hood vent grille to the left about 1/4", then then pull it forward. On some models there are L-shaped clips that fit into a slot to hold bottom of the vent.

The Fast Track repair manual for model SMH1622 is here. It will be useful.

If you have other questions, it's best to follow up with me directly.
(FixYa does not notify us directly when follow-ups are posted, so we have to log in to the site to see them.)

- William E. Miller, AS-EET
pupista@gmail.com
http://www.microwavecontrol.com
Microwave Oven Control Panel Repair Nationwide
"Recycling by repairing since 1982"

-del-g4xxchioxvjfdx1sasymvuu4-5-0.jpg

May 23, 2017 | Samsung Microwave Ovens

1 Answer

How to remove oven door


Bertazzoni X366GGVX Stainless Steel Gas Range Remove ...

www.fixya.com > ... > Bertazzoni X366GGVX Stainless Steel Gas Range
Bertazzoni X366GGVX Stainless Steel Gas Range"remove oven door" Questions. Question about Frigidaire Kitchen Ranges. 1 Answer ..

Aug 11, 2015 | Bertazzoni Kitchen Ranges

1 Answer

I need to clean the grill in hotpoint refrigerator. When I hope the door to the freezer there two screws hold down grill.The refrigerater is model No. HTS16HBMBRCC HOTPOINT


General Electric (GE) Profile refrigerators have a grille on the bottom of the front of the refrigerator. The grille allows air to be pulled from the kitchen into the lower compartment of the appliance by the condenser fan, which cools the refrigerator's compressor. At times this grille must be removed, such as when you are cleaning the compressor, emptying and cleaning the drain pan or adjusting the refrigerator's leveling legs to level the appliance. The grille is designed for easy removal: It is secured in place using only two screws
  • 1 Open the refrigerator doors to at least 90 degrees.
  • 2 Remove the two Phillips screws securing the grille to the cabinet. They are at the top portion of the front of the grille.
  • 3 Pull the grille away from the front of the cabinet to remove it.

  • Phillips screwdriver
    will be needed

    Dec 21, 2014 | Hotpoint Refrigerators

    1 Answer

    What is the wattage for the halogen light for my hood?


    Must be no greater than 30 watts. As it is a standard oven bulb I suggest you just remove the current one and bring it to a local hardware store.

    Jul 11, 2014 | Bertazzoni K30 PRO X 30" Kitchen Hood

    1 Answer

    Bertazzoni hood replace bulb


    First remove cover to access the bulb, pull bulb straight down being careful not to break it. to replace w/new bulb, remove bulb from package, be sure to use a cloth or some type of glove so as not to get oils from your fingers on the new bulb as this will create a hot spot on the new bulb and shorten the life of the bulb. Install the new bulb by inserting into the fixture by gently pushing the bulb into socket.


    Hope this helps

    Apr 19, 2014 | Bertazzoni K30 PRO X 30" Kitchen Hood

    1 Answer

    Burned out light on bertazzoni hood


    Here is how I fix this problem in case someon is still looking for an answer: 1. Turn power to hood off at electric panel 2. Remove light diffusers - these are the round glasses under hood covering the light bulbs. Turn the light diffuser counter clock wise to remove 3. Remove the burned out light bulbs 4. Install the new light bulbs

    Jan 05, 2012 | Bertazzoni K48HERX 48" Kitchen Hood

    1 Answer

    The hood release isnt working. how can we open the hood on a dodge 2004 stratus coupe


    Hope this is not too late. I just worked on this exact car and problem. If the cable is broken upstream from the in car release handle here is my solution: The Stratus has four grill panels. Remove the screws from the upper two panels. The panels have a plastic rivet at the very top which can't be removed unless the hood is open so bend the panels up to gain access. With a flash light look through the grill openings and find the latch. The latch has three 12mm bolts holding it in. The two outside bolts are easily removed through the grill openings. The third bolt is tricky because it is lower and dead center to the grill. It is not in alignment with the openings. It is hard to even see it but with a long extension, universal joint and 12mm socket, it is possible to get to it and remove it. I got to it through the passenger side grill opening. With all the bolts removed, the hood opened with the unbolted latch still attached to it.

    Jun 23, 2009 | 2004 Dodge Stratus

    2 Answers

    Trying to remove service grill for Nutone QT140L combo fan/light


    Yeah it takes a good push and a sharp tug to get them off if they've been there for awhile, they get greasy and stick, They sometimes bend a bit coming out but they're easy to staighten after you clean them. and yes they are one part.

    Jun 02, 2009 | Broan-NuTone N-QT140L Combination Light...

    2 Answers

    Range hood is making noies


    use a good 3 in 1 oil. Don't use WD-40 it will only clean it then dry out the bearing. the problem will be worse than when you started.

    Feb 06, 2009 | Zephyr Savona ZSV-E30AS Stainless Steel...

    1 Answer

    Need a duel fuel range


    We love ours have had it for two years. We have the 48" Dual fuel with the grill on top. Model ZDP48N6RH2SS.

    The only issue we had to adjust to is the btu's (stove top flame) are so high and there is designated simmer burner or low btu burner.

    The grill is excellent especially in the winter but you have to follow the instructions. First time use we didn't let it heat up long enough. Patience - it's worth it.
    That's for our model from 2006.
    YOu must be sure to get a strong enough range hood for the range you buy.

    Dec 24, 2008 | GE Monogram ZDP48L4GHSS Dual Fuel...

    Not finding what you are looking for?
    Kitchen Ranges Logo

    Related Topics:

    71 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Bertazzoni Kitchen Ranges Experts

    Dan Connors
    Dan Connors

    Level 2 Expert

    119 Answers

    ray gallant

    Level 3 Expert

    66470 Answers

    Dennis

    Level 3 Expert

    962 Answers

    Are you a Bertazzoni Kitchen Range Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...