Question about Euro-Pro Sewing Machines

Open Question

Euro pro wont zigzag

Euro-Pro Stitch Master wont zig zag

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 323 Answers

SOURCE: tension on stitches

Loose bottom stitches mean the UPPER tension has a problem. Pull the thread through the tension assembly and test it to make sure the tension is working correctly.
(To do this test, adjust your tension setting to normal or medium or 5 or something in the middle. Raise the presser foot and pull the thread through the tension. It should pull easily!! Lower the presser foot and pull the thread. It should pull noticeably harder.) If it does not work this way( the tension stays loose) you will need to set the tension to Zero, open the discs with a small screwdriver and remove the lint or thread which is stuck in there.
Sewman7

Posted on Jul 01, 2008

Ad

Anonymous

  • 3 Answers

SOURCE: replacement foot pedal and wiring for Euro Pro

Here's a place that carries all the pedals. Many are used by various brands, and go under different names for different machine companies. The euro-pro manual has the manufacturer's name and the model #, or you can browse the drawings of pedals to match your own. My euro-pro 9110 uses a model also used by viking and huskevarna. This place carries the cords as well.
Good luck.

http://sewingmachine221sale.bizland.com/store/page36.html

Posted on Jul 26, 2008

SewTechWayne

SewTechWayne

  • 186 Answers

SOURCE: zig zag won't work

Make sure stitch width slider is not set to zero. If not then you either have a bind in the needle bar pivot or an electrical problem (bad stepper motor or bad circuit board).
I can't remember if this machine has a twin needle lock out, if so turn it off.
Good Luck!

Posted on Feb 01, 2009

Anonymous

  • 13 Answers

SOURCE: Zigzag stitch pulling tight, looks wrong

Try adusting the bobbin thread instead of the top. Always make sure to insert the bobbin so the thread is pulling in a clock wise direction. Both threads top and bobbin should have about the same resitance when pulled.

Posted on May 27, 2009

doughgirl143

  • 1 Answer

SOURCE: thread keeps snapping on NEW Euro Pro 32-Stitch sewing machine

I have the same machine with the same issues. I am so frustrated! Here is how I am going to solve my problem in 4 simple steps:
Step 1. Open garbage can.
Step 2. Throw piece of **** supposed sewing machine into can.
Step 3. Cover garbage can, cursing loudly.
Step 4. Purchase a brand name sewing machine with a real warranty!

Posted on Jul 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Euro-pro model 6131 sewing machine.I just oiled and cleaned it. I am trying to find the standard factory settings i.e stitch length, stitch width, tension, and stitch setting, etc.


The only factory standard settings that you need to worry about is the top tension and the bobbin tension. The standard factory top tension is the midway point between high & low numbers. That is the ideal tension setting for most fabrics, thread, and needles. However, that is also adjusted based on what you are sewing. Bobbin tension you should leave as is unless there are issues that the top tension will not resolve. The other settings you mention are all adjustable based on what you want to do with your machine, ie straight vs zig-zag stitch, etc.--no standard factory setting.

Nov 25, 2017 | Euro-Pro Sewing Machines

1 Answer

TRADITION 2250 SINGER SEWING MACHINE HOW TO ZIG ZAG


From the pattern selector (the bigger dial), select the zig-zag stitch. Then, using the stitch length dial (the smaller dial), adjust the stitch length. The closer your stitch length is to "0", the more dense will your zig-zag stitch be.

Sep 04, 2014 | Singer 2250 Tradition

1 Answer

Viking 6360 buttonhole procedure


you start with the broad zig zag stitch bar across the top
then you go down the left side using a smaller zig zag stitch
then you make the the broad zig zag stitch at the bottom
then you make the smaller zig zag stitch on the right side
all the way to the top broad zig zag stitch & your done
the right side zig zag does not go beyond the top broad zig zag
stitch

Aug 01, 2012 | Husqvarna Sewing Machines

1 Answer

Trouble sewing lycra fabric using a zig zag stitch


You have the machine set for blind hem stitching. Change the stitch selector to stretch stitch, which is a single, in line stitching zig zag stitch.

Cheers,
Embroidery Services
San Diego, CA

Sep 13, 2017 | Sewing Machines

1 Answer

Hi, i want to know the weight and if have zig zag stitch


read the reviews at
http://www.sewingmachines-reviews.com/brother-sewing-machines/euro-pro-ep150-tiny-sewing-machine.html

Amazon says:
Product Details
  • Product Dimensions: 12.8 x 10.8 x 5.9 inches ; 4.2 pounds
  • Shipping Weight: 5.7 pounds , eight stitches including zig zag and blind hem.
4 out of 5 purchasers who reviewed it weren't thrilled with it though

Apr 16, 2011 | Euro-Pro 150 Mechanical Sewing Machine

1 Answer

I'm sewing a zig zag stitch and the underside is a perfect zig zag and the upper side looks like it should be the underside....how can I fix this so that the beautiful zig zag is on the top?


FIRST > Make sure your bobbin case is threaded correctly...

NEXT
For normal straight sewing the top tension should be around 5, for zigzag or satin stitch you need to lower your upper thread tension a bit. Try it at 4, if it still pulls your bottom thread to the top try it at 3 etc...

Jan 15, 2011 | Euro-Pro Deluxe 7130 Mechanical Sewing...

3 Answers

Shark 384 - how can i get a straight stitch?


with the Shark Euro-Pro X machine, you need to bring the stitch width to zero it's the nob on top of the machine the manual states not to use it wider then 3 with the double needle cause it can break the needle. but either stitch selection "A" or "S" will give straight stitching with width at zero.

Nov 19, 2007 | Euro-Pro Shark 60 - 384

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Irene Tulloch

Level 2 Expert

498 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Chris Wetmore

Level 2 Expert

190 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...