Question about Samsung Refrigerators

1 Answer

How do I remove the samsung refrigerator kick plate

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 134 Answers

Pull on it

Posted on May 30, 2019

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

David Coomer

  • 1073 Answers

SOURCE: kenmore dryer how to remove kick plate

if this is a 4-6 year old dryer then the kick plate is held in place with 2 spring clips one on each side a putty knife will disengage the clips,, tip once you get one of the sides loose, put a wedge of paper into the crack on the side and move to the other side to work on the ohter clip

Posted on Apr 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to Replace a Defrost Timer in a refrigerator?


What is timer?
Timer is a small motorized unit that controls the function of defrosts cycle in a refrigerator. The defrost timer tells the refrigerator when to cool and when to defrost any ice frost collected on/in the evaporator coil.
Now the procedure to replace the timer is as follows:--
1) First of all for proper safety please unplug the unit from power outlet.
2) Then to locate the timer. It is located behind the refrigerator beside the compressor of the refrigerator. You will have to remove the metal kick plate on the bottom of the refrigerator. In older models refrigerator it is built into the icemaker unit.
3) In some models timer is fitted by the screws on the side wall of the refrigerator unit. so if screws are seen remove the screws holding the timer to the refrigerator wall.
4) Then slowly/carefully remove the timer out of the unit so you can disconnect the wiring from the connectors. For easy access of connectors try wiggling the connectors back and forth it will be disconnected.
5) Before removing the connectors please take a note of which connector was connected where and in what position.
6) Then take a new timer and plug the connectors in same position and at same spot in the new timer.
7) The refit the screws if you removed while removing the old defrost timer, replace the kick plate cover and plug in refrigerator and check out.
This will help. Thanks.

on Mar 10, 2010 | Refrigerators

1 Answer

Is the filter behind the kick plate on the Kitchen Aid Superba made in 1998?


Hi, the filter should be on the bottom kick plate and should have a cap of the same color as the kick plate.

Hope this helps

I’m happy to help further over the phone at https://www.6ya.com/expert/roger_e8672cfe67bf61a1

May 23, 2014 | KitchenAid Superba Architect KSCS25INSS...

1 Answer

Where can i get a free wiring schematic


origional should be if you remove front kick plate

May 13, 2014 | Samsung RB2155 Bottom Freezer Refrigerator

1 Answer

Ice maker stopped working?


First you should know your machine has the ice bucket in the door, witch means you have a electronic eye that checks to makes sure the ice bin can recive more ice, this device is in the freezer on the right side with the red light. this light can give you a idea of whats rong. first you should open both of your refrigerator doors and remove the bottom kick plate and look in the kick plate grill for the tech sheet. this sheet should ave all the error codes for your ice maker emiter board and should give you some tests to preform for your model.

May 24, 2010 | Whirlpool GS6NHAXVS Stainless Steel Side...

1 Answer

Cleaning


Pull the plastic cover off of the front unit at the very bottom. This is referred to by some as the "kick plate". Upon removing the kick plate, you should see the coils (may need flashlight) and then simply using your crevice tool on your vacuum, clean them off.

Mar 29, 2010 | Amana ABB1927DE Bottom Freezer...

1 Answer

Samsung fridge freezer mod no SRS2028 19.3 cu, ft


the water hose runs through the bottom hinge then to the dispenser. take the kick plate off of the unit and then check for leaks. theres a coupling down there that may be yoiur problem.

Dec 08, 2008 | Samsung RS2534 Side by Side Refrigerator

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Paul

Level 2 Expert

381 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Samsung Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...