Question about Invicta Watches

Open Question

What size battery does a Invicta 8932 take - Invicta Watches

Posted by on

Ad

1 Suggested Answer

escapement

Arturs Kalnins

  • 2338 Answers

SOURCE: how to shorten my invicta (mens pro diver 8932)

For removing or adding links firstly you will have to remove bracelet pins or screws. In case if there are screw on each side of bracelet - you have to use two screwdrivers simultaneously. In case if there are pins - read the rest:
You may or may not have arrows inside bracelet. Arrows are pointing the way the pins must come out. First you have to find out what sort of pins or even screws are used to keep links together (screw ends and pin end may look similar). Examine both bracelet sides and find the side where pin ends have a groove. Start with a tiny screwdriver and try to unscrew one. If it turns, but doesn't come out, that means you have a pins instead of screws. For removing pins the best would be pin removing tool (approx.5GBP on ebay), but it's possible to do the job without it. Take a hardened steel needle and blunt the sharp end to the approx. size of pin end diameter using any sharpening stone or sandpaper. Get an old towel and fold it to make a soft base for work (like small cusion). As you don't have a special bracelet holder you will need a pair of helping hands to hold the bracelet steady upright. You will need small hammer and pair of flat nose pliers as well. NOTE: The pins MUST be driven split end out first, not vice versa. Make sure that the grooved pin ends are facing towel, not the needle and hammer. Now place the watch on the folded towel, take that needle and smallest hammer you have and start driving the pin out using light blows. Do Not hit hard, as you will brake the needle, scratch your watch or even injure yourself. Watchmakers are using 45 gram hammer, so, calculate your strength of blows. After a few punches check if the split end is coming out and when you see that the pin end is coming out long enough - grab it with pliers and pull the pin out with pliers. When pulling, do NOT turn pliers, as pins tend to brake when twisted. Use firm grip and your strength to pull the pin without twisting. After shortening the bracelet or adding extra link(s) make sure that the pins go back EXACTLY the same way as they came out- the blunt end first in the hole and the split (grooved) end last. Before doing that check remaining pins in bracelet to make sure that you put them back from the right side of bracelet. It is recommended to use plastic hammer to drive pins back in or you will scratch or damage bracelet. If plastic hammer is not available use an old toothbrush handle (or some plastic item) as an absorber. Simply put pin into the hole as deep as you can with your fingers, put the toothbrush handle on split pin end and hit handle, not the pin. Make sure that pin ends are flush with bracelet. If needed- hit few more times. Job done! If you do not want to do it yourself, any jeweler will do it in a matter of few minutes.

Posted on Aug 05, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size battery does the Invicta Sea Spider model number 14813 take?


Take your Invicta watch to a jeweler who will open it, identify the battery type, and may even be persuaded to install a replacement for a reasonable sum.

Aug 27, 2018 | Invicta Watches

1 Answer

How to open invicta 1792 to replace battery what size battery does it use


Take your watch to a jeweler who will demonstrate how to open it, identify the battery type, and perhaps replace it for a reasonable sum.

Jan 09, 2018 | Invicta Watches

1 Answer

What size battery dies my sub aqua noma Invicta watch take


To find battery type, take your Invicta watch to a jeweler.

Sep 25, 2017 | Invicta Watches

1 Answer

What size battery does an invicta reserve model 12018 take


Take your watch to a jeweler who will identify the type (not size) and may even replace it for a nominal sum.

Dec 23, 2016 | Invicta Watches

1 Answer

What size battery for invicta model 12843?


  • Remove back
  • Find battery
  • Identify type
OR,
Take your watch to a jeweler who, for a reasonable sum, will replace the battery.

Nov 28, 2016 | Invicta Watches

1 Answer

What battery size takes the Invicta Cuadro 14700


The battery described for this watch is 'non-standard'. I would take it into a jeweller.

Invicta Men 14698 Cuadro Analog Display Swiss Quartz Two Tone Watch

Oct 29, 2015 | Invicta Watches

Not finding what you are looking for?
Watches Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Invicta Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Kardoc

Level 3 Expert

5488 Answers

Tom Lambert

Level 1 Expert

10 Answers

Are you an Invicta Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...