Question about Kenmore Washing Machines
Possible free manual but unsure if this is the same model or not.
Last page has Sears phone numbers to request assistance.
Posted on Jun 14, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: need manuals
What problem are you having, the problems i have seen with kenmore elites are below.
1. when you press start and release dryer shuts off
for this problem, change the board in the console
2. not producing heat
for this problem, check to see if 220 is getting to element, check to see if you are getting 220 from outlet, check your thermal cutoff on heating housing, check your heater relay which is located in top console.
Posted on Apr 03, 2008
Starting in early 2002, the capacity sizes were changed around a little bit. A normal sized washer now all have the same sized tubs (pretty much) in the 110 series (Whirlpool Manufactured) washers. The capacity is now rated somewhat by the agitator action the washer comes with. Depending on the type of agitator you have, will determine the capacity. King size capacity means you have a pretty good capacity (size wise) than others. You have normal capacity, large capacity, super capacity, king capacity, and I even think they have canyon (yes canyon) capacity. Capacity sizes dont really mean to much though. In order for you clothes to get clean, the must have room in the tub to move. The must be able to float up, then get pulled down by agitator action. That should determine the size of what goes in the washer. Always use same type clothing when doing laundry (i.e. towels with towels, sheets with sheets, etc, this will keep the load balanced better). Watch what you load, comforters are ok (per manufactures ok) but I do not tlike the idea unless its a front loader, and only by itself. Let me know if this helps you out any.
Posted on Jun 01, 2008
Sears/Kenmore model number has 3 digits, a dot, then 8 more digits,
such as ###.########
You can just enter your full model number at the Sears parts site.
On the resulting page, look to the right for the blue "View manuals" button. Click there.
That Sears-related site has many free manuals. While the manuals they list there are all free, they will ask you to register.
Many times, the owner's manual will have the installation instructions inside.
If yours is not listed there for free, you would have to order it through the Sears parts site.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.
Posted on Jan 18, 2009
If it is not the plug at the bottom is ok and the temp. sensor is ok.Check the plug on the CCU on top mine was not even plugged in. When I plugged it in the washer started working. You have to take the top off to get to it,but it is easy. Three screws on the back top and the top will slide off easily. There is a troubleshooting manual in the front bottom panel on right side of panel. Page 10 troubleshoots the temp. sensor. The book gives you all the troubleshooting codes. The front panel comes off easily by unscrewing three screws on the very bottom of the panel.
Posted on Feb 08, 2009
Tips for a great answer:
Sep 06, 2011 | Kenmore Elite Oasis 27052 Top Load Washer
Feb 14, 2011 | Kenmore Elite 45986 Front Load Washer
Jan 10, 2011 | Kenmore Elite 45986 Front Load Washer
Nov 18, 2010 | Kenmore Washing Machines
May 15, 2010 | Kenmore Elite 45986 Front Load Washer
Apr 12, 2010 | Kenmore Elite 45986 Front Load Washer
Apr 07, 2010 | Kenmore Elite 45986 Front Load Washer
Jan 25, 2010 | Kenmore 63942 Dryer
Apr 10, 2009 | Kenmore Elite Oasis 27052 Top Load Washer
302 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: