Question about Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
Dishwasher won't stop blinking (clean lite) i can't do anything
Press back and forth between hi-tempwash and sani rinse several times to get all lights to come on if not then press sani rinse and heated dry back and forth several times. one of though combos will start the test mode. the test mode will stop the light from blinking and you can use the dishwasher again
Posted on Nov 28, 2007
You can also pres "normal wash" and "heated dry" buttons back and forth and it will reset the dishwasher and work normal again
Posted on Feb 16, 2008
My Kenmore dishwasher just quit in mid cycle and now I have nothing, no power no lights no nothing! I have reset the breaker and still nothing. How can this unti be reset with no lights or the signs of no power?
Posted on Aug 25, 2008
Using the Hi-temp and sani rinse buttons back and forth got the washer to light all the buttons up,but only closing the door actually got it out of reset mode. It ran a short cycle and then stopped. I had to start he washer all over again. It working so far.
Posted on Feb 20, 2008
I have had the same problem with my Kenmore Elite dishwasher. After calling Sears to get some sort of help on this matter, I was given the quick fix on how to reset the chipset inside the dishwasher much like other people have stated on this forum (i.e. press on Heated Dry and Normal Wash buttons in sequence a couple times until all the lights come on). However, the problem kept happening regularly despite my continuous re-setting efforts. I then called a technician that made me aware of the actual source of the problem. There is a temperature sensor inside the dishwasher that will prevent normal operations if the in-coming water temperature is not hot enough. Since I live in a brand new home, I quickly realized that new building code standards require the installation of a heatguard system that prevents scalding by blending cold water with the hot water coming out of the hot water tank. Despite having my hot water tank thermostat cranked way up, the hot water temperature circulating through the house is governed by the heatguard solenoid. Simply re-adjust the setting on that heatguard device to a higher setting until your dishwasher stops manifesting signs of malfunction.
Good luck, hope this helps!
Posted on Sep 18, 2008
Having problem with my Kenmore Elite, not sure of the model. It was bought brandnew in May 2007- only 2 years old!! It will fill up with water, and then it sounds like maybe a motor is burnt out? You can here a humming, but nothing happens after the water fills. I have let it set for about 1.5 hours after the last load was done- and it is still not doing anything. Tried the Normal Wash and Heated Dry buttons. All lights came on. Nothing is still happening. Am I missing a step? Is the door to be opened or closed? Please help!!!!!!!!!!!!!!! Had a big dinner tonight- and do not want to have to wash everything!!!
Posted on Aug 24, 2009
I have a kenmore elite. It will not drain. The pump tries but the water is not being sucked out
Posted on Oct 06, 2009
I had a blank board--it had went 'dead' and your advice worked to restart the panel. I knew there had to be some form of reset--thanks for the advice
Posted on Sep 29, 2009
My dishwasher shows only red lights. Nothing will come on. Help
Posted on Jul 13, 2010
Start button wont work and the only three buttons that will are pot and pans, normal and china gentle. Any suggestions?
Posted on Dec 30, 2009
All of a sudden there is water flooding from the bottom of the dishwasher when it's running. I took the bottom front panel off and it seems to be draining right onto the floor .... seems to come from the near the front (underneath) of the dishwasher. Any ideas what to do???
Posted on Jan 05, 2010
Fixya password 30583C68
Posted on Jan 24, 2010
Heres my prob i cant get my water to fill all theway up on my 665 it fill just 1/2 then i have to shut it off and put it on then it fill up the rest
Posted on Oct 26, 2008
Our kenmore leaves white flecks on the glasses so we ran some vinegar water through a cycle and that has cleared it up a little but we still have little white flecks on the classes. We do not use a powder but a liquid detergent. When I rub these flecks in my hand with some moisture they dissolve so I assume it is soap. How can i get rid of these flecks?
Posted on Apr 24, 2010
Kenmore Elite, ultra wash , Quiet Wash 4, water flows into the basin then will not do anything else. Sounds like a curcuit trip after water flows. Any suggestions?
Posted on Aug 09, 2008
We have a Kenmore Elite dishwasher that runs then stops and none of the buttons light up. The problem has to do with a blown thermoresistor. Its a $20 part that you can replace yourself. We've had to replace the thermocouple, heating element and control panel...but the thing is a piece of junk. There is a safety issue here but Sears will not listen to us. This is supposed to be a high end dishwasher but we waste more time repairing the thing than using it. What a headache! I think we'll be junking it soon and buying from somewhere elese!!!!
We just had the issue of the clean button flashing and pressing the Normal Wash then Heated Dry buttons to reset the panel helped. I thank Kenmore 777!
Posted on Oct 11, 2009
For solution #8 parts call 630-877-9374 chicago western suburbs naperville aria
Posted on Sep 22, 2008
If you need any parts for a Kenmore elite I have a two year old and it is like new only used 1 year and only lightly . but since we starved it of water it wont run and I already put in a new one. could have fixed or cleaned the sencer and saved a lot but got a new one any way.
Posted on Sep 19, 2008
I had a problem similar to yours and I found that my dishwasher wasn't level. After I leveled it, I didn't have the problem repeat. The other issue with the dishes being wet, should be handled by the heated dry option. The air dry, though energy saving, doesn't dry them at all in my opinion.
Posted on Dec 21, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 25, 2015 | Kenmore 24 in. Elite Built-In Dishwasher...
Sep 04, 2014 | Kenmore 24" Built-In Dishwasher with...
Dec 16, 2011 | Kenmore 24 in. 17482 / 17484 / 17489...
Oct 12, 2011 | Kenmore Elite Stainless Steel 24" BuiltIn...
Dec 01, 2010 | Kenmore Elite Stainless Steel 24" BuiltIn...
Jul 14, 2010 | Microwave Ovens
Feb 22, 2009 | Kenmore Dishwashers
Feb 13, 2008 | Kenmore 16602 / 16604 / 16609 Built-in...
66,004 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: