Question about LG LRSC-26922 Side by Side Refrigerator
We are having a problem with the water/ice dispenser sticking on our LG Refrigerator. It has happened a few times in the past when I would get water and it would get stuck and keep dispensing water. I kept pressing the back panel until it finally stopped. I tried to get water the other evening and it is now stuck and continues to dispense water. I finally got it to stop by opening the freezer door but once closed it would start again. I pressed the lock button on the panel which caused it to stop but the light stayed on because it was still in the “dispense mode” so I unscrewed the lightbulb. Once I unlock the water continues to dispense? Any idea as to how to fix this?
THE ACTUAL BUTTON AND ACTUATOR NEEDS CHANGING AND POSSIBLY THE SWITCH. EARLIER MODELS WERE CHANGED BECAUSE OF THIS.
Posted on Sep 22, 2009
We removed the rubber pad because the problem looked like it was due to it sticking. now, without the pad, it has never stuck again but now we are moving and would like it to lok nice and operate correctly. anyone have a link to the replacement? thnx
Posted on Jun 23, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: water/ice dispenser sticking on
We had a problem with the water/ice dispenser on our 5-year-old LG SxS Refrigerator (LRSC 26930TT). In a panic to stop the water flow, the rubber activator boot was pulled off. The dispenser stopped once the button attached to the back of the boot was removed. Nothing was physically broken (i.e., parts intact) but the challenge was to get things (especially the boot) back in place. The key for me was to use patience: researched Internet for pointers (not too helpful), looked for schematics (even less fruitful) and exhaustively examined the panel on refrigerator (to help reverse engineer). Okay, here’s how I disassembled and reassembled without breaking any tabs or other pieces. Assuming your unit is similar, the panel is on the freezer door on the left side. You can lock the dispenser (using panel button) to preclude undesired water/ice while working. Note: the outer bezel (edge of panel) is secured by screws and should not be messed with. The main panel has tabs on all four sides. I used three screwdrivers (small to average in size) to pry the panel off. Pry the main panel working through the seam between the bezel and panel. Work your way around starting from the lower left or upper left corner. Each side of the panel has 3 or 4 tabs. Methodically work your way around using moderate force to pop the tabs loose. Once the panel is loose, you’ll need to disconnect the electrical connector at the upper left. The plug comes off and reattaches easily…don’t pull on the wires, use the plastic connector itself. Wiggle the panel free. Now you can get to the back of the boot retention bezel…the ultimate goal. Carefully push the bezel’s securing tabs (x3) through the panel and reattach the rubber boot. I used needle nose pliers to carefully pull each rubber nib through their applicable hole on the bezel. Now leave the boot/bezel assembly to the side—it’s the last step to reassembly. Note how the main panel tabs fit into their receiving slots/flanges. Reattach the electrical connector, snaps right on, and maneuver center of panel into recessed area, around ice chute/water nozzle. Slide the right and bottom sides on first—flanges, not slots for tabs—then align remainder of panel. Using moderate force, pop (punch) the remaining tabs back into their respective slots. The main panel will seat over the bezel. Now align and snap boot/bezel back into place. Finis! (No guarantees, but this procedure worked like a charm for me.)
Posted on Mar 14, 2010
SOURCE: water dispenser sticks
You should spray the mechanism with some PAM or other similar cooking spray. This will act as a lubricant. Spray it into the hinge area and work the lever back and forth.
Posted on May 06, 2009
Posted on Mar 25, 2010
Tips for a great answer:
Oct 15, 2018 | Refrigerators
Oct 25, 2015 | GE Profile 26.6 cu. ft. Side-by-Side...
Oct 02, 2013 | Whirlpool 25.6 cu. ft. Side-by-Side...
Oct 05, 2017 | LG 26.0 Cu. Ft. Side-by-Side Refrigerator...
Mar 21, 2010 | LG LRSC-26922 Side by Side Refrigerator
Oct 05, 2009 | LG LFX25960ST Stainless Steel French Door...
Sep 11, 2009 | LG LRSC-26922 Side by Side Refrigerator
Jul 03, 2009 | Jenn-Air JSD2695KES Side by Side...
Aug 15, 2008 | Maytag 25.6 cu. ft. Wide-By-Side...
Jun 10, 2014 | LG LRSC-26922 Side by Side Refrigerator
7,587 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: