Question about Furniture

Open Question

No assembly manual for lift recliner L2-br-b - Furniture

Posted by on


2 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Golden Tech

  • 14 Answers

SOURCE: My Golden Technologies Comforter Series

With Golden Technologies chairs, there is a self diagnostic system. There are LED lights at the transformer and the hand control. If you do have have lights at the transformer, it may be a power issue or a bad transformer. If you have lights at the transformer but not the hand control, it is the hand control. Since you state you ahve lights on the hand control, it is probably a motor issue.

The best thing you can do is call the store which sold you the chair or call Golden directly at 1-800-624-6374. While they do not sell directly to the public, they can point you to a local dealer who can help with the repair.

Posted on Sep 19, 2011


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Change time on digital watch


make model manual

or ask any 12 year old kid

or visit a local jeweler


How to Set a Digital Watch: 9 Steps (with Pictures) - wikiHow

Jump to Switching to Time Mode - If a digital manual is impossible to find, look up and call the ... “Mode” changes your watch into Time Mode, Stopwatch ...
4 Button Digital Watch - Dakota Watch

In normal time mode, Hold L2 for 2 seconds to alarm time set mode, then L2 again to normal time set mode, the second digits begin flashing. Press R2 to reset the seconds to “00”, press R1 to switch to the minute digits. Press R2 to advance the minutes.
How to Set a Digital Watch | LEAFtv › Home › Dress Up › Fashion › How to Set a Digital Watch

Digital watches give you the time at a glance, clearly and simply. But setting ... The button may instead be labeled "Set" or "Adjust" or something similar. "Mode" ...

Oct 07, 2018 | Watches

1 Answer

Lift master garage door opener won't open door motor runs no access to inside of garage. Suggestions?

manual release has been triggered

just lift up the garage door manually

will take effort

if motor drive engages as you lift and you cant get the door up any more
try the remote


Apr 30, 2017 | Building Materials

1 Answer

Home Meridian Comfort Lift Chair - lift mechanism is sloppy in partially reclined positions

Bolts commonly loosen up on these. You may be able to tighten them. I had to turn the chair over, pull out some of the staples that hold the material on and find the nut that went on the inside, then I was able to tighten the bolt again and staple the material back in place. I also had to make a new plastic cross bar for the scissor assembly by using a half inch PVC pipe and two flat plugs and two couplings, I then drilled a hole in the center for the screws to go in. Painted the newly made one with black plastic paint from Lowes and it's stronger now then before. If you want parts here is Home Meridian's contact..........

Jan 24, 2014 | Home Meridian Comfort Lift Recliner

1 Answer

My sister manages a funiture salvage store and this power lift recliner came in partly deassembly

When it comes to furniture, there are usually substitute parts you can find online. I would suggest trying to get a discount or partial refund depending on the payment situation. If it didn't come complete, you shouldn't pay the full amount. If worse comes to worse, you can find the same chair but run down and use its parts as substitutes.

Elisa Jed '

Jan 18, 2014 | Coaster Furniture Power Lift Recliner...

1 Answer

Meridian lift chair recliner

Possibly controller has gone bad. Home Meridian for new one........

May 09, 2013 | Home Meridian Comfort Lift Recliner

1 Answer

Recliner foot rest bolt broke and spring came off

looking for two small springs that go in the foot lift section of a lazy boy recliner. these springs allow you to raise the foot lift to different positions. these are very small springs and attach to each side of two small drum types.

Mar 22, 2013 | Lazy Boy La-Z-Boy Power Lift Recliner...

1 Answer

Window set up for box plot

Use the Zoom button and select 9:ZoomStat. Window will be restricted to your data.
Suggestion: You can use two lists. L1 for the values, and L2 for the frequency. I see many duplicate values: 6 values 23. On the same line as 23 in L1, put 6 in L2
Before entering the frequencies in L2, you may want to sort the L1 list. It would look more orderly.

Other advice (forgive me if you already know). To obtain the median, Q1, Q3 use the [TRACE] button, then use left/right arrow. Screen will display the values for Med, Q1, Q2, Minx, MaxX.
Hope it helps.

Nov 11, 2009 | Office Equipment & Supplies

1 Answer

VCR will not play on screen and cannot set VCR channel

please contact me by phone I will walk you thu it

Thanks Frank

Sep 22, 2009 | Televison & Video

Not finding what you are looking for?
Furniture Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Furniture Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Tom Chichester

Level 3 Expert

54386 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Furniture Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides