Question about Pioneer Audio Players & Recorders
Hi Ramon, as you say, the protection circuit is working, you would have a problem in the power supply or in the audio outputs of speakers
I suggest you disconnect, all the speakers and test if the fault continues, if it does not continue, connect the speakers one by one and test until the possible fault is detected
If you disconnect and stay the same, I suggest you look for a specialized technical service
If you have knowledge and technical expertise, I give you the link to download the service manual of your Pioneer
I hope you can solve the problem
Regards Franco Dosil
Hola Ram?n, por lo que comentas, esta trabajando el circuito de protecci?n, tendr?as un problema en la fuente de alimentaci?n o en las salidas de audio de parlantes
Te sugiero desconectar, todos los parlantes y probar si continua la falla, si no sigue, conecta de a uno los parlantes y prueba hasta detectar la posible falla
Si desconectas y sigue igual, te sugiero busque un servicio t?cnico especializado
Si tienes conocimientos y pericia t?cnica, te paso el link para que descargues el manual de servicio de tu Pioneer
Espero puedas resolver el problema
Saludos Franco Dosil
Posted on Aug 13, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
any pre-out should work. i believe the bose have a rca jack connector for attaching to the receiver. look at the new receiver connection diagram. any output that is rca designed for use by a recording device will send a signal that the 901's can see.
always check the manual on both before connecting for any precautions.
Posted on Dec 28, 2007
SOURCE: pioneer vsx-d511 amp error
I've had the same problem for over a month and have yet to find the time to get to it. However, I there may be a fuse on the circuit board that needs to be replace. That's just my guess.
Hope it's the solution.
Posted on Sep 17, 2008
SOURCE: Pioneer VSX 915 powe off
Had a power surge last night and got the same problem. Unit wont power on and has a blinking blue light on standby button. I found the solution from the service manual for a similar model.
Hold down ENTER and ADVANCED SURROUND buttons.
This resets the DC overvoltage sensor and bingo the unit comes back to life again.
Posted on Feb 05, 2009
Unfortunatelly your receiver has failed. The front panel is telling you one of the power modules is probably bad. Not an DIY type of repair. These parts are near $40.00, plus cost of replacing.
Look at options to replace your trusted receiver with a new one.
Posted on Aug 02, 2009
Tips for a great answer:
Jul 24, 2016 | Pioneer VSX-523-K 5.1 Channel AV Receiver...
Aug 22, 2013 | Televison & Video
Register and download the manual for free at retrevo.com
Feb 25, 2011 | Pioneer VSX-D510 Receiver
Jun 18, 2008 | Pioneer VSX-915 Receiver
Mar 21, 2008 | Audio Players & Recorders
Feb 01, 2008 | Pioneer VSX-D511 Receiver
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: