Question about KitchenAid Food Mixers

Open Question

KitchenAid Hobart Model KFP400 Food Processor REPLACEMENT PARTS

Need a replacement work bowl for a KFP 400.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

doobo67

  • 49 Answers

SOURCE: need replacement bowl for KitchenAid 3-C

put a watch on Ebay for the bowl they come on there once in a while

Posted on Jan 01, 2009

Ad

Joe Hogan

  • 10865 Answers

SOURCE: replacement bowl for Hamilton Beach Scovill model #702-4

go to this site and you can order one:

http://www.smallappliance.com/department.asp?cur=USD&sid=18956&gid=18970&shopBy=Category&cam=drg_247-10377&drg=247-10377&gclid=CPPEqdb6zZgCFQw9GgodtGMO1A

Posted on Feb 08, 2009

Anonymous

  • 2 Answers

SOURCE: Replacement parts for Bravetti platinum pro food processor

for replacement parts on bravetti products call 1-800-798-7398 or www.euro-pro.com

Posted on Apr 15, 2008

Joe Hogan

  • 10865 Answers

SOURCE: Need replacement blade for Russell Hobbs hand mixer

go to this page http://www.russell-hobbs.com/parts.shtml and order what you need directly from Russel Hobbs.

Please mark this answer as a fixya! thanks

Posted on Mar 18, 2009

QuietRiot

  • 145 Answers

SOURCE: my kitchenaid processor is not working

The Kitchenaid food processors have a few safety features implimented. If the unit is not assembled properly, this may prevent the unit from turning on. I am thinking this is an issue of assembly because the light is on, so the unit is definitely getting power.

Proper assembly is below:

If it isn't all ready, please disassemble the entire unit. This means removing the blade and/or disc, blade, removing work bowl, work bowl lid, and blade.

Start by placing the work bowl onto the motor base. The work bowl handle should be facing at 9 o'clock, which is out to your left. Rotate the handle downward until it locks in at the 6 o'clock position, which will lock over the center of the button panel.

Repeat the process with the work bowl lid. The blade does not need to be present for the motor to engage, if this is an assembly issue.

Posted on Aug 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

KitchenAid ACCOLADE 400 Mixer.When mixing dough the bowl jumps out of the the bowl lock. How can this problem be resolved?


I know this sounds a bit simple but the bowl cup can sometimes actually wear out and a very fast (# screws) and a new one and the problem is solved. If however there is a problem on the head hold down set screw (under the mixer in the cavity ) it can come loose then the mixer head can bounce all over the place causung the bowl to get loose in the holding cup at the base of the mixer., I hope this helps, let us know if you need more, we can FixYa

Feb 22, 2015 | KitchenAid Food Mixers

1 Answer

KitchenAid ACCOLADE 400 Mixer. When mixing dough the bowl jumps out of the bowl lock. How do in resolve this problem?


Make sure that the bowl is fully tightened in the bowl lock. If this does not solve the problem it may be that the lock disc itself needs to be replaced or that the amount of dough is more than the dough hook can handle.

Feb 22, 2015 | KitchenAid Food Mixers

1 Answer

My bowl lift lever on the hobart (bought off ebay) K5ss doesnt lock the bowl into place. What do I need to do to fix it, or at least figure out whats wrong if something needs to be replaced.


On a bowl lift mixer there is a small metal clip on the back of the bowl support arm, it works in conjunction with a small "NIB" on the back of the bowl, when you put the bowl on the support arm there are two pins that the bowl rests on, on each side of the support arm, you place the bowl on the pins then press down the rear of the bowl untill the nib locks into the clip, if the bowl is not locking in place then one of four things are wrong, one of the pins are not on the support arm, the NIB on the back of the bowl has come off (it is spot welded on) or the clip at the yolk of the support arm has worn down or broke in half and there would be no locking action without it. The pins or the clip are inexpensive if it is the Nib on the back of the bowl you will need a new bowl. Hope that helps if not pleases get back with us so we can FiXya.

Oct 14, 2014 | KitchenAid K5SS Heavy Duty Commercial...

1 Answer

Kitchenaid mixer glass bowl broke. I need a replacement. I have a 4c mixer. Do you know where I can find one?


The glass bowl for the 4c mixer is much different than the bowls that are currently available. Your best option is going to be to find a used bowl off of eBay.

Your other option would be to replace the bowl lock plate and buy a new bowl for the mixer. I have had a few customers say this works, and I have had a couple say that replacing the bowl lock plate and bowl did not work. So you can give this a try as well.

Mar 28, 2013 | KitchenAid Food Mixers

3 Answers

My kitchen aid mixer bowl falls out when I'm mixing


Hello Heather,

Either the grooves on the bowl lock plate are worn out, or the grooves on the actual bowl are worn out. I would start with replacing the bowl lock plate. Here is a link to the part: KitchenAid Mixer Bowl Lock Plate 4163032

This part is really easy to replace, it is held into place with three screws, remove those screws (make sure to hang onto those you will need them to re-install the new part). then you should be able to pop the old plate out. To install the new plate like up the screw holes, and press into place, sometimes you need to lightly tap it into place with a rubber mallet as it is suppose to be a very tight fit.

Once that has been replaced your bowl should lock into place tightly. However there is always a chance that the bowl has been worn down and may need to be replaced. Here is a link to the 4.5 Quart bowl: KitchenAid 4 5 Quart Stainless Steel Bowl

- Colleen @ Mending Shed.com

13965943-25j1o4dy5jqip5urp5sucdth-5-0.jpg

Aug 12, 2012 | KitchenAid K45SS Classic Stand Mixer

2 Answers

My KitchenAid bowl keeps coming loose when kneading dough. Any solutions?


Hello Heather,

Either the grooves on the bowl lock plate are worn out, or the grooves on the actual bowl are worn out. I would start with replacing the bowl lock plate. Here is a link to the part: KitchenAid Mixer Bowl Lock Plate 4163032

This part is really easy to replace, it is held into place with three screws, remove those screws (make sure to hang onto those you will need them to re-install the new part). then you should be able to pop the old plate out. To install the new plate like up the screw holes, and press into place, sometimes you need to lightly tap it into place with a rubber mallet as it is suppose to be a very tight fit.

Once that has been replaced your bowl should lock into place tightly. However there is always a chance that the bowl has been worn down and may need to be replaced. Here is a link to the 4.5 Quart bowl: KitchenAid 4 5 Quart Stainless Steel Bowl

- Colleen @ Mending Shed.com
12448327-25j1o4dy5jqip5urp5sucdth-3-0.jpg

Apr 16, 2012 | KitchenAid KSM90 Ultra Power Series Stand...

1 Answer

I need a replacement bowl for the braun km32 mixer


I have an extra bowl, but am in need of a regular whisk...any chance you have an extra and we can trade?

Jun 21, 2010 | Braun Food Mixers

1 Answer

Need beaters for Kenmore Model 400 vintage stand mixer


Go to the correct wed site ********>...!

Nov 14, 2008 | Food Mixers

4 Answers

Replacement beaters


I had an SM100 which did not work when I got it out to make cookies recently. So, I have both bowls available (large and small), beaters, dough hooks, whisks and the use and care book too! I sure will miss that mixer. Contact me at lindareagan@comcast.net

May 29, 2008 | Black & Decker MX55 PowerPro Hand Mixer

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

170 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...