Question about Bernina Sewing Machines

2 Answers

Bernina 830 old style need replacment part -under extention table

Bernina 830 old style sewing machine. I need to replace the complete cast iron piece and quick lock clamp under the extention table. Table is fine, I just need to replace the under piece, will have it welded.
Thank you

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

The clamping yokes for Bernina sewing tables for models 830 and earlier models were hand fitted parts. Welding this may change the geometry so that the table may not fit at all. Additionally the material is diecast AL, not cast iron, and may or may not accept TIG welding applications.

Posted on Sep 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Bernina Master
  • 12,731 Answers

I found a replacement table clamp for my 830 Record on eBay. Need to have patience, but one will probably show up.

Posted on Apr 03, 2015


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to remove the top cover of Bernina 830. My machine keeps telling me to rethread. It stitches about 10 stitches then stops

Which Bernina 830 are you referring to? (Yeah, it was crazy of Bernina to use the same numbers to identify different models...). There is the old Bernina 830 Record and the new computerized Bernina 830.

Have you tried rethreading the machine? If so, be sure to ALWAYS RAISE the presser foot. Verify the thread path is correct.

Apr 10, 2018 | Bernina Sewing Machines

1 Answer

How do I remove the free arm plate from my Bernina 830

Not sure I understand your question. Is that the old Bernina 830 Record? Removing the extension table will reveal the free arm. On the other hand, if you want to open the free arm to clean and oil, look inside the bobbin department and there is a little metal tab on the left top side that, when pushed, will release the cover.

BERNINA Sewing Systems

For the newer computerized 830, here's the manual:

Jan 04, 2018 | Bernina Sewing Machines

1 Answer

I have a Bernina Sport and when I press the foot pedal only intermittently does power go to the machine. How do I correct this?

It could very well be the carbon brush. It is generally a piece of soft carbon (like pencil lead) with a spring on the end which applies pressure. When the carbon gets worn down, it does not make consistent contact. Depends on your machine model. I've replaced carbon brushes on the motor of an 830 Record, but I had to replace something in the foot control. Do not despair. The replacements can be found for ~ $12-15. Available multiple places. Just be sure they will fit your machine.

2 Bernina Carbon Brushes for All New Style Machines eBay


Oct 11, 2016 | Bernina Sewing Machines

1 Answer

Broken take up lever bernina 830

contact a sewing machine repairer(Bernina authorised )for the part number and part availability and possible cost for repair.

Jun 20, 2013 | Sewing Machines

2 Answers

Bernina 740 Replacement gear needed

check with these sites about parts

Oct 15, 2012 | Bernina Sewing Machines

1 Answer

I have and old Bernina 830 and am trying to adapt a new foot pedal switch. The new plug is larger where it fits the machine. Is the wiring the same on the new bernina foot switch as the old? If so, I can...

unless the new harness and control is for a new style computerized machine the control should be the same, the different size plug is baffling me

Jun 25, 2010 | Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

511 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bernina Sewing Machines Experts

Chris Wetmore

Level 2 Expert

190 Answers

Wayne Buss

Level 2 Expert

121 Answers

Harjeet Singh

Level 2 Expert

109 Answers

Are you a Bernina Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides