Question about Shredder Office Equipment & Supplies

Open Question

I need a basket for a perfectly good MX100 shredder (lost in a move).

Posted by on

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
goalie39

Ed

  • 479 Answers

SOURCE: what is the interlock for a staples shredder

if you look at the underside of the shredder, you will likely find a pressure switch that is actuated when it sits on the stock bin, either modify it to touch when on the new bin or secure it so it is depressed all the time. This should allow it to operate on the replacement bin.

Hope this is of some help.
Ed

Posted on Apr 20, 2009

Ad

abp20

  • 1218 Answers

SOURCE: need basket 4 rl170mx shredder

Give Royal a call at 1-800-524-0799 for parts.

Posted on Aug 19, 2010

txslim55

txslim55

  • 1104 Answers

SOURCE: I need a new shredder basket

Paper Shredder Parts Division of Document Dynamix

Posted on Sep 20, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Emerson cross Cut Shredder X822 how to check Steel Interlock switch at bottom of unit?


Brian, a lot of shredders have a microswitch in the bottom of the unit that has to be activated by a tab on the basket. One possibility is that the tab has broken off, which means that you would need a new basket, or there is a possibility that the shredder head is on the basket backwards and is not connecting with the tab. Hope this helps.

May 22, 2014 | Shredder Office Equipment & Supplies

1 Answer

Runs reverse auto


From your manual!

In case of a paper jam , which may occur if the shredder is pushed beyond its specified capabilities, press the control switch to the off [O] position and empty the basket if full. Then:
1) Press and hold control switch in reverse [R] position and attempt to back paper out of shredder.
2) If shredder jams in reverse mode, press control switch to automatic [I] position and attempt to continue shredding operation.
3) If shredder jams again, alternate control switch slowly between reverse [R] and automatic [I] positions to attempt to move jammed paper completely through shredder.
If you are unable to clear the jam using this method, turn off and unplug the shredder; remove the wastebasket from cabinet and carefully remove any paper extending below the cutting cylinders; empty the waste basket; insert waste basket and repeat jam clearing procedure.

Feb 01, 2014 | Fellowes DM12C Shredder

1 Answer

Need basket 4 rl170mx shredder


Give Royal a call at 1-800-524-0799 for parts.

Jul 31, 2010 | Royal 150MX Cross-Cut Shredder

3 Answers

OM 99727 shredder not working


I had this same problem. This is what I did to fix it.

When I went to ShredCare.com (the recommended web site for technical support of this particular shredder), I read that 'Most models of shredders have a safety interlock switch that is activated by the basket.' Upon looking closely at my basket and the shredder, I found this safetly interlock switch and made sure to align it with the proper position within the basket. There is only ONE way to place the shredder on the basket and have this safety interlock switch activated. The switch is located on the underside of the shredder. Align this switch with the ridge on the inside of the basket. Listen carefully and you will hear the switch 'click' when in the right position. Mine is very touchy. I've even had to press in on the side of the basket while shredding to make sure that the ridge and the switch are making contact.

Hope this helps!

Aug 15, 2008 | OfficeMax 0M96431 Shredder

2 Answers

PS-70 Shredder problem


Make sure that the shredder is locked down in its case by pushing down on all 4 corners.
Since the basket slides forward to empty it, I would think the safety switch is located in the front but not positive since I don't have a unit right in front of me.
Check to see if you see a slot in the top part of the shredder unit. Usually the basket has a piece of plastic that will line up with the slot when the basket is in place (Safety switch) so that the top part of the shredder knows that the basket is in place.

Look around with a flashlight, If you are going to feel around with your hand, PLEASE MAKE SURE YOU UNPLUG the shredder just to be safe.

Hope this helps.
Good luck.
Mac =)

Feb 10, 2008 | Fellowes PS-70 Shredder

2 Answers

Shredder won't turn on


ok " if the ready light did not come on it's telling you that there is no power sound like the plug in transformer is no good .

you can check that transformer , with a multimeter, see if you have the right voltage.

Jan 27, 2008 | Office Depot Ativa DQ60M Shredder

4 Answers

Parts


I am not sure but i suggest check for the manufacturer via the internet

May 23, 2007 | Achiever CCS5000 Shredder

1 Answer

How to empty a Tech Solutions TS8000 shredder


Pull the top of the basket toward you and the top of it should swing out. Then you can lift the basket up and out once the top of the basket is partly open. Hope this helps. Have a good day. Mac =)

Mar 09, 2007 | Tech Solution TS-8000 Cross-Cut Shredder

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Shredder Office Equipment & Supplies Experts

Ross Keen

Level 3 Expert

1364 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Shredder Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...