Question about The Office Equipment & Supplies

1 Answer

We moved we want to set it up at the new house but dont get signal

No signal detected

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 21 Answers

Unplug the cable running from your monitor to your PC and plug it back in, making sure the connection is firm. The most common cause of this error is a loose cable. ... If the "No Input Signal" error still appears, the problem does not rest with the cables or the monitor, but with your PC.

Posted on Jul 17, 2019

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My a/c is blowing warm air. its a new house; moved in just a month ago. my grandmother constantly changes the settings back to 80...could this have busted my a/c?


Dear Sir:
1) Could be a reason just moving the thermostat.

2) You need to check the unit for condenser + evaporator very well from a Tech. Since the freon is not good signal for a good operation , the reason is may be some Leakes in the pipes.

sincerely. God bless you

ernesto cuadra
managua, nicaragua. c.a

Mar 29, 2012 | Heating & Cooling

1 Answer

I have an old wannadoo live box on orange worked fine until I moved home. Orange have confirmed that internet has now been set up at my new address and I kept my old phone number. The LAN into my...


i assume you have DSL connection through phone line . double check the cables see if they are connected properly betwee the modem and router etc ..if its all connected then reset your router by pressing littile tiny button at the back of Router and apply new WPA2 password and try connect .

May 12, 2011 | Computers & Internet

1 Answer

I have a linksys wireless router (WAG160n) and need to extend the signal from my house to an outbuilding where I have my office. I can get a signal in the front room of my office but not in the main part....


You will need to install an WIFI extender in the front room of your office which will then extend the signal to the rest of the out building. I've included a link on Amazon to a very simple, easy to set-up extender that you can set-up with the push of a button. Once you set-up/configured the extender near your existing router following the simple instructions, you can then move it to the front of your office. Best of luck!
Amazon com TP Link N300 Wi Fi Range Extender AP mode Supported TL WA855RE...

Oct 12, 2017 | Linksys WRT160N Wireless Router

1 Answer

I have an Edimax 802.11/n wireless adapter installed on a desktop. We moved and the new location barely picks up the signal from my Linksys access point. In my previous house, it did okay, although it was...


check your edimax setting for the adapter if teh wireless signal is the same as the routers chanel the edimax defaul channel is always set to chanel 1 for the signal of its wireless and if your router has a different channel most probably channel 11 or 6 which is the most likely chanel that many use

May 22, 2010 | Computers & Internet

1 Answer

Have a 2Wire Router from SBC that has recently been causing connection problems with my sons XBox. Low signal roughly 2 bars. Nothin has changed in the house. Have router in main bedroom, Xbox is in son's...


if signal is fading in and out there are a lot of factors. 1 have you installed an other electrical epuiment in the house? emf cause interference. 2 if you move the xbox to the same room as the router how is the signal? d3 do you have a laptop to try next to the xbox where it is at now and see the signal? if it is weak on ther laptop also get a new router.4 if the signal is good on the laptop your xbox is the problem.

Dec 30, 2009 | 2wire HomePortal 100W Router...

2 Answers

My TV says NO SIGNAL on tuner...


yes, you may be lucky to just to burnt one of the source/input mode try switching them.
for example use a video cable instead a coax if you still dont get a signal that means the picture uotput board is damage by the storm.

Aug 15, 2009 | Olevia 227-S11 27 in. LCD TV

1 Answer

Timer knob doesnot move dryer will not turn off.


Clean the fabric softener off the metal strips located under the filter housing inside the dryer. If **** gets on them then they wont send a signal to the dryness board and advance the timer motor. Resistance is monitored between them 2 metal strips as yer wet clothes tumble in the dryer. Wetness is detected and the motor gets a no go. When the all clear is signaled up then they is happy motoring to the finish line.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Mar 15, 2009 | Dryers

1 Answer

Cant connect my lcd tv to my pc


IT MAY NOT SUPPORT THE MFG OF THE TV, UNLESS IT DOES SUPPORT AND I DONT KNOW ABOUT IT THAN GOTO THE TV MFG WEB SITE AND SEE IF THEY HAVE ANY NEW DRIVERS FOR THE CARD AND MAYBE THE MFG OF THE TV MAY ALSO HAVE DRIVER FOR YOU VIDEO CARD SO IT CAN DETECT THE SIGNAL,
IM THINK IF YOU HAVE PAL, THERE ARE 4 DIFFERENT TYPE OF SIGNALS AND WITH THE NEW DEGITAL TV , VEDIO CARD HAVE SET THEM TO DEGITAL SETUP, NOT ANOLOG

I DONT KNOW A FEW THING TO HELP YOU FEATHER, TV AND VIDEO CARD YEARS OF MFG IN EACH DEVICE.

IN FEB 2009 WE SWITCHED FROM ANALOG TO DEGITAL TV,

WITH THE BOX YOU WILL NOT BE ABLE TO USE THE TV

Feb 27, 2009 | Nvidia TNT2 Vanta, (16 MB) AGP Graphic...

1 Answer

Signal strength very low. Belkin ADSL2 modem with wireless g router F 507632-4


signal is bouncing off doors and walls to get to your comp
move comp closer to modem if it increases and your signal strength increases then you know youll have to be close to modem

other problem someone taped your signal and it working off of it call your provider to come out test the wireless signal strength and or password your wireless router settings so some one cant interfere with signal

i dont like wireless myself in the home i go straight cable with ether net cord this always has strenght and cannot be tapped

May 09, 2008 | Computers & Internet

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top The Office Equipment & Supplies Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Keith Love

Level 2 Expert

47 Answers

James Cagle
James Cagle

Level 2 Expert

482 Answers

Are you a The Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...