Question about Hobart Food Mixers

Open Question

Hi I have a Hobartc210 antique mixer and am trying to get a dough hook for it I think one off a c-100 may fit but it's hard to get dimensions I have a mixing paddle

I have a Hobart c210 will a dough hook off a c100 fit

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
bigg t

anthony james

  • 640 Answers

SOURCE: Blakeslee CC-30 Planetary Mixer & dough hook not mixing correctly

it sounds like you may have a sheared key on one of the shafts.with no product in the mixer will it run in any other speeds?when mixing pizza dough you should only use 1st gear.if it does run in other speeds you have a sheared key or broken shaft,if it doesnt run in any speeds drop the planetary and check the key on that shaft.

Posted on Jan 05, 2008

Ad

Anonymous

  • 135 Answers

SOURCE: KitchenAid 600, Stand Mixer -

Hi. Stop using your mixer. If your mixer is still covered by warranty, call Kitchenaid Customer Service, they are very good with warranty repairs.

If your mixer is out of warranty, remove the silver band that surrounds the top of mixer. Remove the top cover. At the front of the mixer, locate the transmission housing which is now exposed. Examine this housing carefully for cracks. If you find cracks anywhere in this housing, you have found the under-engineered plastic transmission housing. Kitchenaid's replacement housing is made of metal. Your plastic housing has no business being in a mixer that is marketed as being able to mix bread dough. It cannot!

If you're confident that you can make the repairs yourself, go to the Kitchenaid website and download the parts drawings. Remove the Trans. housing, remove the worm gear shaft assembly which is driven by the motor.. Remove and save as much grease as necessary to thoroughly inspect the worm gear. Inspect the worm shaft bearings. Look for cracks, or missing pieces on the bearings. Look for crunched cogs on all gears. Be prepared to wait at least a month for your parts to arrive after you order them. The replacement grease should be Shell Darina 2, or Chevron FM ALC EP 2.

If you're not confident about repairing this yourself, call Kitchenaid and determine the nearest "approved" repair shop.

You may be able to pressure Kitchenaid to pay for the damaged parts in your mixer. They are still installing these plastic Trans. housing on new mixers. Insist on a metal cover when replacing. Apparently, Kitchenaid feels no shame in their manufacturing process, and will not issue a recall notice for these housings. They are substandard at best.

If you found this solution helpful, please rate it. Good luck! ricardok45.

Posted on Feb 13, 2009

bigg t

anthony james

  • 640 Answers

SOURCE: Hobart H-600-T Mixer Shuts down while mixing bread dough

What you replaced were the contacts on the overload,correct?These 'heaters' look like springs?If so you have other issues.I'm a hobart tech and repair these mixers often.Are you mixing pizza dough?

Posted on Mar 07, 2009

ginko

Ginko

  • 19396 Answers

SOURCE: My mother needs a replacement bowl for a Model 4C Hobart Mixer

Hi.

The Hobart/Kitchenaid model 4C Stand Mixer was produced between 1961 and 1977.

This unit is now a vintage piece chased by collector. Parts dealers do not sell parts anymore for such an old model.

The parts must be purchased on the second hand and vintage market, best source is Ebay. Put 4c mixer or kitchenaid 4c to find parts.

The bowl is easy to find, it is part 4162158, regular retail price for replacement is $44. buy the glass one on Ebay, that will be the original one mounted on first models.

Here Ebay list.


Vintage KitchenAid 4c Glass Mixing Bowl Excel Cond!

VINTAGE KITCHENAID 4C MIXER WIRE WHISK ONLY

KitchenAid Mixer md 4C Complete with Bowl White

KITCHENAID MIXER 4.5QT S.S. BOWL FTIS MODEL 4C 4162158


-------------------

Here also a forum where you can contact more Kitchenaid vintage appliances owners or collectors.

-----------------

The dough tool is not even easy to find on Ebay. Try contacting Kitchenaid and see if they can give you a compatible part.
If they have the original one (unlikely) , then do not be surprised if part price is over $30.

If you find a 4c with tools for spares on Ebay , buy it, and resell the parts you do not need. The whole mixer with bowl and one tool is worth over $50.

The original owners manual can also be purchased from Kitchenaid/hobart

Regards.


KitchenAid Customer Service

Posted on Nov 13, 2009

monomoy

  • 110 Answers

SOURCE: how to adjust bowl height on 20 qu hobart mixer.It

you need to remove splash shield, tilt mixer back,with a long screwdriver adj. the set screwclockwise to decrease clearance for beater to bowl clearance,always use b beater when making adj. clearance should be .054" to .115".also make sure there are no deformities in btm of bowl which can cause you problems.dont forget to vote

Posted on Jan 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dough hook


Hi, the new style tools do not fit old style mixers, yours probably had the small circlip on the shaft, the new ones dont have this, and it's this what held your tool in place

Jan 05, 2014 | Kenwood KM400 / KM410 Chef Classic Stand...

1 Answer

Hello. I just purchased my Kitchen Aid Professional 550 HD last Sunday from Costco. I've used it four times and tonight we noticed that the two thin rings (one black) just above the beater shaft are out...


What I think you are describing is the snap ring (black) which you cannot move and the washer controlling the up thrust of the mixer. The black snap ring is usually a tight fit into the groove on the shaft and shouldn't move. The washer right above it is required to be there enabling the mixer to used with a spiral dough hook. The spiral dough hooks cause upwards pressure on the gear train that does not exist using a c-type dough hook. I think you mixer is fine............leave it alone, that's the way it was designed.

Dec 31, 2010 | KitchenAid KP2671 Professional 6 Series...

1 Answer

Having a hard time removing the dough hook on the h-600.


make sure the beater shaft is clean. is the dough hook new or old if its new you can deburr inside of dough hook to ease in install and removal of attch. please let me know so i can futher asist

Dec 03, 2009 | Hobart H600 Stand Mixer

2 Answers

Dry clumps in pizza dough


Hi. You should consider a few things. They type of hook you use, can greatly affect your end result. If you're making a yeasted dough with a high protein percentage 12-13%, you should be using an "ED" hook, this is a spiral hook that has a sharp turn at the tip. You can find them on eBay for a competitive price. I believe that Hobart also sells them, but for a higher price. They are very good for mixing pizza type doughs, they also do an excellent job kneading the dough.

Have you checked the flour for lumps before it goes into the mixer? Have you tried sifting the flour?
Are you adding all the liquid and flour at once? If so try adding flour in stages to all the liquid. If you find that this solution helps you, please rate it. Good luck! ricardok45

Feb 19, 2009 | Hobart D340-6007 Mixer

1 Answer

KitchenAid Parts


Given the age of a 3-C stand mixer, finding additional parts for it will be exceedingly difficult. The best recommendation is through E-Bay or antiques stores - a specialty dealer. Kitchenaid parts distributors will no longer have anything in inventory for the 3-C mixer.

Jan 03, 2009 | KitchenAid Food Mixers

1 Answer

Hobart a200 mixer won't mix


The bowl holds 20 quarts--are you overloading the mix?This mixer is not made for medium/heavy pizza dough.Depending on the pounds of dough,water and other ingredients will affect the mixer in some way.

Nov 09, 2008 | Hobart A200 Stand Mixer

1 Answer

Dough hook


if you r using it for dough use the roller and scraper it works much better. But if u want to use the dough hook the holes in the middle is where the knob and stick in the arm go into to hold the hook inplace and it also goes in the hole on the side near the scraper hope this helps

May 30, 2008 | Magic Mill DLX 2000 Stand Mixer

2 Answers

Blakeslee CC-30 Planetary Mixer & dough hook not mixing correctly


it sounds like you may have a sheared key on one of the shafts.with no product in the mixer will it run in any other speeds?when mixing pizza dough you should only use 1st gear.if it does run in other speeds you have a sheared key or broken shaft,if it doesnt run in any speeds drop the planetary and check the key on that shaft.

Jan 05, 2008 | Food Mixers

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1363 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...