Question about Samsung Heating & Cooling

3 Answers

SAMSUNG split AC AS09WHWE led keeps blinking.

SAMSUNG split AC AS09WHWE when switch ON it makes a beep noise and all the 3 led in front keeps Blinking.

Posted by on

  • 2 more comments 
  • eenal
    eenal Jun 19, 2013

    I experienced same problems too - bought 2 units, and both have the same problem. I did bought new PCB cost me almost 100 bucks but still failed. Pls help...

  • Anonymous Mar 17, 2014

    red led is blinking on rau318 split hitachi ac

  • Anonymous Mar 17, 2014

    red led is blinking on rau318 split hitachi ac

  • Lucine Worrell
    Lucine Worrell Jul 05, 2019

    Seriously, shut this site down its useless

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Samsung Air Conditioners SAMSUNG split AC AS09WHWE led keeps blinking

Posted on Oct 26, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 18 Answers

Check the condenser unit the one outside for possible damaged compressor, best way is to have an Ammeter to see if the amperage is rising more than 12 amps at the first 3 seconds when turning on the unit.

Posted on Oct 29, 2018

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 5,638 Answers

Effective Way to Recover Lost Files on Samsung

Android data recovery is actually an amazing application for getting back and retrieve lost files from Samsung Galaxy S9.
Directly recover deleted or lost data from mobile phone.


1. Retrieve deleted files from internal memory and external SD card.


2. Get back photos, call logs, contacts, video files, text messages, whatsapp, etc.


3. Restore lost data from broken or locked Samsung device.


4. One-click backup and restore Samsung phone or tablet.


5. Support Galaxy S9/S8/S7 Edge/S7/S6 Edge/S6/S5/S4/, Galaxy Note 9/8/5/4/3, Galaxy J7/J5/J3/J2, Galaxy A9/A8/A7/A5/A3/ and more.


LEARN MORE


Android Data Recovery Software How to recover deleted and lost Photos from Samsung Galaxy C3 C5 C7 C8 C9 How to recover deleted and lost Photos from Samsung Galaxy A3 A5 A7 A8 A9 How to recover deleted and lost data from Samsung Galaxy C3 C5 C7 C8 C9 How to recover deleted and lost Contact from Samsung Galaxy C3 C5 C7 C8 C9

Posted on Oct 29, 2018

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a HL67A750 Samsung no picture no sound blue light luminated on front 3 LEDs flashing


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 05, 2017 | Samsung Televison & Video

Tip

Laptop LED Blink on Startup There are many reasons that a computer does not...


Laptop LED Blink on Startup
There are many reasons that a computer does not startup or boot into the Windows operating system. If your computer will not start or boot, you will see or hear symptom to indicate the general area of the problem.
Startup Symptom: LEDs blink but does not start
The blinking LED lights on newer computers, or the beep tones on older computers, will help support agent determine what hardware component is not responding properly. The exact meaning of each code varies with the model, and the user cannot change any of the blink or beep codes.
DO THESE FIRST - Perform a hard reset.
If a PC suddenly fails to boot properly, you should perform a hard reset as the first procedure.
1. Disconnect all peripheral devices and remove all USB devices and media cards. You want to test the computer not the accessories!
2. Disconnect the AC power adapter, remove the battery and then press and hold the power button for at least 15 seconds.
3. Reconnect the AC power adapter (but do not connect the battery), Press the Power button, Look for glowing LEDs near caps lock and num lock keys, and Listen for sounds of a disk drive and fan turning.
Identify the number of blinks or beeps
When there is a start-up problem and you see LED lights on the keyboard blink a few times (between 1 and 8 blinks) do the following actions.
Table of Sample Blink Codes
The following table illustrates the meaning of blink codes used on some notebooks. The blink or beep codes on your computer may have different meanings.
Meaning of Sample Blink Codes for some EFI Notebooks:
1) Number of Blink: Continuous Glow, Blinking LED: Battery power LED, Component: Battery,
Error Condition: The AC adapter is attached and the battery is charging, but does not yet have sufficient charge to power the notebook.
2) Number of Blink: 1, Blinking LED: Caps Lock/Num Lock, Component: CPU,
Error Condition: CPU not functional
3) Number of Blink: 2, Blinking LED: Caps Lock/Num Lock, Component: BIOS,
Error Condition: BIOS corruption failure
4) Number of Blink: 3, Blinking LED: Caps Lock/Num Lock, Component: Memory,
Error Condition: Module error not functional
5) Number of Blink: 4, Blinking LED: Caps Lock/Num Lock, Component: Graphics,
Error Condition: Graphics controller not functional.
6) Number of Blink: 5, Blinking LED: Caps Lock/Num Lock, Component: system board,
Error Condition: General system board failure.
7) Number of Blink: 6, Blinking LED: Caps Lock/Num Lock, Component: BIOS,
Error Condition: BIOS authentication failure.
8) Number of Blink: Continuous blink, Blinking LED: AC power adapter LED, Component: Power adapter,
Error Condition: Insufficient power
Common solutions for issues that cause blinking LEDs or beep tones
When the computer can boot into the BIOS, run the memory test to identify other issues.
Check for loose connections and test the memory
Blink codes are often displayed after a user adds memory to the computer but does not seat the module properly. The LEDs may also blink error codes if a hardware component is loose because the computer was dropped or jarred. The problem could be that the stick of memory or one of the memory slots has a bad connection.
Check for loose memory modules
If a memory module is loose or is not making good contact with the memory slots, the computer does not recognize all of the memory. Reseating the memory module may resolve memory failure errors.

on Mar 21, 2011 | Computers & Internet

2 Answers

AC power light blinks but not starts


The outside unit has a problem. Have it tested.

May 05, 2017 | Hitachi Heating & Cooling

1 Answer

We have a Fisher and Paykel washing machine model MW509NZ. it keeps going into error with Leds 3, 5, 7 and 8 illuminated and a beeping noise. What is the problem please.


this is a fault code 43 which mean the out of balance switch is either faulty or the switch isstuck in the on positionfree up or replace switch which is located just under the main board

Aug 06, 2012 | Fisher and Paykel Washing Machines

2 Answers

Split AC 1200-BTU Kenwood Model ANK12P Pearl series Power lights ON but Unit does not become ON. Its power LED becomes ON but buzzer does not beep as it beeps with normal power ON,and no response from...


hi keen,

let me help you as I can,

first check your remote unit if it is transmitting a signal by looking at the front end of the remote using digital camera or cell phone camera, you should see a light coming on in the front end of the remote.

if there is none then the problem could be from your remote.

keep me posted thru the "ask me" button

tnx 4 using fixya

drcool

Sep 06, 2008 | Samsung AS18A6RB Air Conditioner

1 Answer

AC swith dask board LED signal


your welcome . feel free to ask me again any questions you may have.

Aug 31, 2008 | 1995 Toyota Tercel

2 Answers

POWER


remove ram memory - it should beep when you switch it on - if no beep then check CPU in socket and cpu fan spinning when on.

Jul 31, 2008 | HP Compaq d530 SFF PC Desktop

1 Answer

AS09WHWE


www.myrepairmaster.com. try this link and please read it carefully, this gives you the advantage especially when all your appliances warranty expired.

Dec 12, 2007 | Samsung AS18A6RB Air Conditioner

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

2,148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Heating & Cooling Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Brad Brown

Level 3 Expert

18143 Answers

Are you a Samsung Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...