Question about Televison & Video

1 Answer

My ViewSonic TV suddenly stopped working. The

My ViewSonic TV suddenly stopped working. The remote won't turn the tv on, I have to manually do it and when I do turn it on it flashes colours, red, white, grey, blue, every few seconds the colour changes. I can't use any of the functions on the TV because they don't work either. All it does is flash these colours, it's like it's gone mental. This all started happening after we got a Novus box with 400 + channels our TV was fine before/ is my TV officially fried?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Televison & ... Master
  • 1,527 Answers

Hi do you mean the colour flashing on the screen, if so it's gone in to screen burn mode try press menu on the remote, retune the tv, if this don't work get back to me with model number of the tv help you a bit more thanks

shaun

Posted on Jun 13, 2017

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Plasma Tv 42PD580DTA, Black and white screen while viewing DVDs or Video

Hi there,
My sister-in-law has exactly the same problem and is a common one with this unit.
I've spoken to a technician who says that:
1. Hitachi are withdrawing from Australia and there are VERY limited service centres left
2. The problem is a chip on the main board and depending when the TV was made will determine whether the chip is a plu-in or soldered on to the main board - if it's the latter, you'll be up for a main board at around $400
3. He couldn't get the price of the plug-in chip because he couldn't get through to Hitachi.

Cheers

Dave M.

Posted on Apr 28, 2008

Anonymous

  • 1 Answer

SOURCE: Panasonic Viera TH-42PV7HS Plasma keeps shutting down

Hi to all, My 42" Panasonic plasma have the same problem. It turned itself off and now red light flashes 7 times, than after short pause 7 times again. And so on. Any ideas what is wrong??

Posted on Oct 23, 2008

Anonymous

  • 271 Answers

SOURCE: viewsonic n2750w 27" turn on the tv it gets 4 different colors

if you have a reset button (might be hidden)...hit dat

Posted on Dec 17, 2008

SamsuTech

  • 113 Answers

SOURCE: My Samsung LCD TV slowly flahses colours, each about 2-4 seconds

hi,

your lcd is in test mode. you may try off the power. press and hold menu + source + power on.

this should go back to normal mode.

Posted on May 10, 2010

Azrael SRL

  • 11800 Answers

SOURCE: Blocks of Colour displaying

 This tv has severe problems in the image processor - you bought a dud. Try getting your money back.

Posted on Jun 26, 2010

Testimonial: "Thanks, Azraelsrl! "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My viewsonic n2751w tv will not stop channeling down... have to put weight on top to stop


mmm sounds like a sticky channel switch on your tv itself. Spray some special stuff called Contact cleaner spray available at any electrical outlet or hobbyshop - its a little bit expensive but works great to clean motherboards and most other electrical equipment. Spray while the tv is off and press buttons in between sprays

Jan 14, 2015 | ViewSonic N2751W 27 in. LCD Television

1 Answer

The Vizio TV won't turn on all of a sudden


Are you trying with the remote and the power button on the tv? The batteries might be dead in your remote if you haven't tried the power button on the TV.

Feb 15, 2013 | Televison & Video

1 Answer

ViewSonic Speakers won't work


Sound issues and answersA VERY SHORT LIST OF ISSUES AND ANSWERS-

sound on set or a box muted or turned down?

speakers inside the set (see menu) switchedon or off?

internal/external switch somewhere in or on back of set?

Clearly it could be a audio problem (a model number?) but explore all here thatyou have not already done--make sure theremote set to TV and look for a button on it marked MTS and if there cycle it.

You can also determine if same trouble when you play a DVD. (IF SOUND WORKS VIAREAR INPUTS IT IS A SETTING IN THE TV OR THE BOX.

Apr 07, 2012 | ViewSonic N4285p 42 in. LCD TV

1 Answer

RC00070P remote has stopped working


Testing remote control:
The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera’s Lens (Digital Camera can detect IR), you should see flashing light on the camera’s screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals.
Parts: www.shopjimmy.com
www.remotes.com

You can get remote directly from Viewsonic, they are about $25 + shipping.

https://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Jul 13, 2010 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

I have a Viewsonic N2060w-1M TV but I don't have a remote. How to I program a universal remote control - Jenses -to work with my Viewsonic?


For the remote codes, Viewsonic does not have any since the universal remote comes furnished with a code book from the "MAKER" of that Universal Remote. I have heard that the Philips TV brand codes for universal remotes work on quite a few series' of Viewsonic TV's, so try those from your code book.

May 30, 2010 | ViewSonic N2060w 20 in. LCD Television

1 Answer

Will it work on viewsonic


To control a Viewsonic TV with a One for All URC-3021, follow these steps:

1) Turn on your TV.

2) On the remote, press the TV key once.

3) Press and hold SET until the LED blinks twice, then release SET.

4) Enter the four-digit code 1755.
The LED will blink twice.
If it does not blink twice, go back to step 2 and try the same code again.

5) Aim the remote at the TV and press POWER.
The device should turn off.
If it does not turn off, repeat steps 2 through 5 with the next code in the list.

I hope that helps.

Dec 24, 2009 | One For All URC-3021 Remote Control

1 Answer

All buttons on tv stopped working only turns ON no ...


There is a button lock in the menu of the television. Using your remote access the menu screen and unlock the buttons.

Feb 19, 2009 | ViewSonic N3735W 37 in. LCD TV

4 Answers

Remote code


I had the same problem with a Viewsonic N3735W LCD TV and Comcast Customer DVR 3 Device remote. I contacted Viewsonic and they gave me 11454 which works.

Dec 19, 2008 | ViewSonic N3735W 37 in. LCD TV

4 Answers

3735w Viewsonic Power lock problem


I had the same issue on my Viewsonic N3752w
The online guide, said I had to press VOL+ and Menu at the same time, but forgot to say
a) it's from the TV buttons NOT the remote!!!
b) you need to keep pressing these 2 until it stop saying "Power unlocking" but Unlocked.

Sep 14, 2008 | Televison & Video

1 Answer

RCA TV stopped working


Time to go to BEST BUY and nuy a better tv

Oct 13, 2007 | RCA 32F531T 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...