Question about HP DeskJet 932c InkJet Printer

Grinding noise on startup

My hp 932c makes a grinding noise on starting to print.

1 Answer

Anonymous

Problem The Resume light continues to blink after the paper jam is cleared.
OR
The carriage is stuck or making a grinding noise. Solution 1. Lift the top cover to the printer. 2. Turn the printer off and then on again. 3. Unplug the power cable from the back of the printer when the grinding noise starts. 4. Move the carriage towards the middle of the printer (this procedure may take a couple of tries to get the timing correct). 5. Take out the cartridges and close the top cover. Turn the printer back on! 6. Reconnect the power cord. 7. Open the top cover, reinstall the cartridges, and then close the top cover

Posted on Mar 25, 2008

1 Suggested Answer

6ya staff

2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

2 Answers

Hp 1018 printer making really load grinding noise and not printing

ok first try restarting your printer, then try uninstalling the driver for your printer off your computer, restart your computer and printer and then reinstall your drive for the printer, see if you get a replacement for your printer or a refund

Dec 01, 2014 | HP LaserJet 1018 Printer

1 Answer

HP C310A grinding noise

Hello,

Grinding noise is unusual. Check for the following ...
> Place the printer on an even surface.
> You may remove the ink cartridges and install them back.

If issue still persists, please call HP Tech Support as the printer requires a service.

If you are from USA and the printer is Out of warranty, then you may be provided an option to Trade in.

If issue still persists, please call HP Tech Support for further assistance.

If you are in US , the toll free # is 1-800-474-6836 .

If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.

Apr 01, 2013 | HEWLETT-PACKARD C310a All-In-One InkJet...

1 Answer

I have a HP Laserjet 1300 printer and makes a grinding noise on startup/warmup - any advise?

grinding noise in scanning unit of hplj 1000 series

Sep 21, 2010 | HP LaserJet 1300 Printer

1 Answer

Deskjet 932C. Won't feed paper.

Make sure you inserting the paper not deep inside just insert and stop it when you feel any resistance .and try to print something. If it is print then well otherwise you have to show it service center.

Sep 24, 2009 | HP DeskJet 932c InkJet Printer

1 Answer

Printing so small hard to read. HP 932c Email prints at normal size. It's just very small when printing from the internet. Thanks,

look at your perfences before u print the letter. change the font to a larger size. the web browser that u are using has perferences that print at a certain size font..

Jul 15, 2009 | HP DeskJet 932c InkJet Printer

1 Answer

HP Deskjet 1320 printer makes grinding noise and stalls before it prints

I think the noise is normal for hp deskjet. When starting up, the printer read the head existence, and do cleaning. is it the first replacement cartridge? Disable ink status monitor.

May 29, 2009 | HP Office Equipment & Supplies

1 Answer

My HP DeskJet 932c InkJet Printer wont print photo paper.. ANY! it starts but then suddenly stops, then deletes the printing job all by its self.. it will print on regular paper. i also set up the print...

try adding some sewing machine oil to the slide bar

Apr 21, 2009 | HP DeskJet 932c InkJet Printer

2 Answers

Lexmark C510 Laser Printer- Grinding Sound on startup and while printing

Thank you Krissy! I had the same problem with the horrible grinding noise.

I took out all of the toners and the photo developer and noticed that my Blue toner was leaking all over. After reading your post, I tried replacing the toner. It worked!!! No more noise - and no more mess!

Jan 30, 2008 | Lexmark C510 Laser Printer

1 Answer

Loud grinding noice before starting to print

Mine makes a grinding noise when scanning or making copies. As long as everything is working, I just tolerate the noise in which the rest of the staff find amusing at first and then ignore it as I do.

Jan 25, 2008 | HP PSC 1210 All-In-One InkJet Printer

1 Answer