Question about Hitachi P50H401 50 in. Plasma HDTV
My TV does not switch on, when I turn the TV on, the TV comes on for about 2 seconds then the blue power light comes on and next the light blinks red and turns off with the red light continuously blinking but no picture or sound. This happens every time I turn the TV on. I have to unplug the TV in order for the light to stop blinking. As of yet, 3 weeks, it still does not work. Can you tell me what might be the problem.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The TV is on protect mode.
Try first leaving the TV power cord unplugged for some times, let say one hour or so.
Also ensure that the fault is not coming from a faulty receiver box sending bad signal, check if you get same problem with no receiver box or dvd connected.
If that does not work, and you keep having a flashing led on front of the TV, and tv turning off by itself after a while, that indicates a fault condition.
The flashing light indicates a diagnostic state called protection.
When the TV goes on protection there are only two possible reasons.
1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.
2 The protection circuit detected a wrong voltage or abroken contact, identified an internal fault and kicked in , startingthe flashing light.
If you are in situation one, then theTV will reset just unplugging power cord for one or two hours,sometimes even minutes.
If you are in situation 2 , then there is an internal fault.
Common faults that can occur are a blown capacitor on power board, a convergence IC has blown, or a fault on Digital board.
Check also the video cable or any external connection cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.
If under warranty contact the manufacturer ringing the number on the user manual
If you want to repair at your own expenses, just locate any good qualified repairer.
Posted on May 22, 2009
Tips for a great answer:
Jul 12, 2012 | Hitachi P50H401 50 in. Plasma HDTV
Jul 11, 2011 | Hitachi P50H401 50 in. Plasma HDTV
Sep 03, 2010 | Hitachi P50H401 50 in. Plasma HDTV
Jan 22, 2010 | Hitachi P50H401 50 in. Plasma HDTV
Jul 17, 2009 | Hitachi P50H401 50 in. Plasma HDTV
Jun 21, 2008 | Hitachi P50H401 50 in. Plasma HDTV
Feb 07, 2008 | Hitachi P50H401 50 in. Plasma HDTV
Jul 12, 2015 | Hitachi P50H401 50 in. Plasma HDTV
598 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: