Question about Electric Garden

2 Answers

Need sprocket for 14 inch portland chain saw

14 inch electric chain saw /portland

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 587 Answers

These Portland brand chainsaws were manufactured for Harbor Freight. Like all Harbor Freight products, getting parts for them is a bit of a challenge, as the products are only available for a couple of years and then no longer manufactured, with parts no longer being available. You can try contacting Harbor Freight and inquiring as to whether parts for your particular model are still available or not. -

Contact Harbor Freight Tools
1-800-444-3353 6-6PM PST

Posted on Aug 19, 2019

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Electric Master
  • 55,370 Answers

Harbor Freight will want you to purchase a complete replacement rather than just a sprocket.

Posted on Aug 18, 2019

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 550 Answers

SOURCE: 14 inch electric chain saw throws chain off

If a new chain ::
make and model is important here, as are guide bar length
a particular chainsaw, may be available with 12,14,16,18,20,22,24,26 inch guide bar,
likewise different saws (even from different makers) use the same size of chain
a chain for this saw may be sold in a variety of lengths or
may be sold in the longest length only and require links removed to suit smaller bars.
back to the store, with the saw, for confirmation

If an old chain::
stretched way beyond safety, replace

Posted on Sep 28, 2008

Chuck Bamforth

  • 205 Answers

SOURCE: need owners manual for sears craftsman 14

Sears web site has manuals for (pdf) free

Posted on Apr 21, 2009

wireguy212

danny herget

  • 1627 Answers

SOURCE: how to put the chain back on a 14" Poulan electric

Remove the cover that cover the rear of the chain bar.Now,loosen the nuts that attach the bar and slide the bar reward.Now set the chain in the slotted part of the bar,pull it forward until there is abut 3/8 of an inch slack in the chain an tighten the nuts.Re-install the cover.

Posted on Sep 12, 2010

drallim

  • 4088 Answers

SOURCE: just got a homelite 33cc

Yes you do! The ratio is 50:1 fuel to oil. Be sure to use a modern synthetic saw oil available at home centers, hardware stores, and saw dealers. Be sure to use fresh fuel and mix the two in it's own container. Be sure to shake the container thoroughly each time just before refueling to prevent oil starvation in the engine. Don't make up more than one gallon at a time unless sawing is your business. Hope this helps!

Posted on Dec 16, 2010

Cindy Wells

  • 6065 Answers

SOURCE: where can I find a Product Manual for McCulloch

McCulloch manuals are available as PDFs at their site: http://www.mccullochpower.com/node7877.aspx . Enter the model number and click Search. The direct link to the MCC1514 manual is http://www.mccullochpower.com/ddoc/MCCO/MCCO2008_USen/MCCO2008_USen_MCC1514-6096210915_966993001.pdf .

I hope this helps.

Cindy Wells

Posted on Jul 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I borrowed a friend's POULAN 14" ELECTRIC


Remove the side cover nuts and the cover, wind the bar adjuster screw fully back, it may be in the cover, or on the front of the saw, push the guide bar fully back toward the sprocket, loop the chain ocer the sprocket and lay it around the the guide bar, make sure the cutters on the top of the bar rail are facing away from the saw, this will make sure it is the correct way round make sure the bar adjuster pawl is engaged into the hole in the bar, if the adjuster pawl is in the cover, replace the cover making sure the pawl engages into the hole in the bar, refit the cover nur finger tight, adjust the adjuster screw so as the chain fits snug fully around the bar, loft the nose of the bar and fully tighten the cover nut, with a gloved hand pull the chain manualy around the bar to make sure it is fitting in the rails and the sprocket correctly.

Aug 31, 2011 | Poulan 14" Chainsaw

1 Answer

Oil not feeding to the chain guide on the electric ryobi chain saw


Remove the cover on the right hand side of the saw and remove the bar and chain. Clean the oil port holes in the bar and the body of the saw. They get clogged with sawdust and chips. Also clean the groove in the bar and the sprocket at the end of the bar. Always use proper chainsaw bar oil.

Jan 12, 2011 | Ryobi 18-inch Electric Chainsaw Chain Saws

1 Answer

Poulan 14" electric, model# PLN1514


Hi there, a couple of features come to mind that may be the cause of your problem.

Firstly, make sure that the saw is unplugged from the power supply.
  • The chain brake is active and wont allow sprocket movement and hence the chain. If necessary, pull the front guard (in front of the front handle) back until it clicks.
  • Electric saws generally have an additional motor-stop feature built into the trigger mechanism which is deactivated when the trigger is squeezed. So, in order to move the chain along the bar the trigger needs to be squeezed releasing the motor-stop. A tip - wear gloves when handling chains and move the chain towards the bar tip ie in the direction of the cutters - if the chain suddenly stops you wont remove several layers of skin in the process ! better still use a screwdriver against the back of one of the cutters and move it forwards - there should be some resistance and there should be no slack chain on the underside of the bar. Hope this helps.

Nov 06, 2010 | Poulan 14" Chainsaw

1 Answer

Start procedure for chainsaw ncr 4550


The header says that this is an electric saw which doesn't have a start procedure--just push the button and it runs. Electrics also don't have a clutch because the motor doesn't need to continue running when not cutting like a fueled engine does. Most electrics, however, have a safety device that uncouples the chain drive sprocket from the drive shaft to protect the gearbox. Remove the bar and chain, then look for a broken/disconnected drive link or spring connected with the sprocket. If the shaft itself does not turn, then there is likely problems in the gearbox. Hope this helps!

Jun 03, 2010 | Ryobi 18-inch Electric Chainsaw Chain Saws

1 Answer

Where can I order parts for my 16 inch electric Remington saw.


Usually any where that repairs lawn mowers, snowblowers, and chain saws or places that sell them like Sears.

May 13, 2010 | Remington 16" Electric Chain Saw

2 Answers

Motor turns --sprocket or chain doesn't


I'm assuming your kill switch is not engaged, the front handle should be pulled to the rear. It's normal to have some damage on the sprocket from loose chains catching on the corner so I doubt you need a new one. The motor turns? I'm assuming you're talking about the clutch, and if the clutch spins but the chain does not it sounds like your bar may be damaged or as you said the sprocket may need to be replaced if it's seriously been misused.

Apr 15, 2010 | Remington 16" Electric Chain Saw

1 Answer

The chain on my Remington electric saw keeps jumping the sprocket. Solution? Thanks.


Depending to what model you have, the Sprocket cover tab (located on the round part of the sprocket cover) isn’t inserted into the saw body tab slot. Or your cahin is not tensioned properly. According to the manufacturer... "The adjusting block on the adjusting screw isn’t inserted into the adjusting hole on the guide bar. Reinstall and align the sprocket cover by first removing the sprocket cover from the saw. Turn tensioning screw on the sprocket cover counter-clockwise until it stops. Pull guide bar away from saw body to remove slack from chain. Insert sprocket cover tab into saw body tab slot and lower sprocket cover into guide bar bolt. Finger tighten guide bar nut onto guide bar bolt. Slowly push guide bar toward saw body until adjusting block on the adjusting screw drops into round adjusting hole on the guide bar. Securely tighten guide bar nut after properly tensioning saw chain." If these tips do not work, you may need a new chain. You can order an new chain on-line at www.masterparts.net. I hope this helps you!

Jul 01, 2009 | Remington Electric Chain Saw

1 Answer

Craftsman 16 inch cain saw sprocket wont turn


Sounds like the sprocket could be stripped. If so, then you would need to replace the sproket. I suggest you contact Master Parts at 800-466-1446 or online at www.masterparts.net. They may be able to help you.

Jun 09, 2009 | Remington Electric Chain Saw

1 Answer

Electric chain saw chain adjustment. How loose should it be?


the chain should not be sagging from bottom of bar.when you tighten the chain push the nose of saw up so that all of the slack is out of the chain.chain should snap back in the bar if you pull the chain up and let go.when i adjust a chain i push the saw forward to make the bar go up and stay there while i tighten the nuts.hope this helps, let me know

May 11, 2009 | Desa International Remington 14" Electric...

1 Answer

Need to clean out chain saw sprocket area


Hi dorothy. Here is the link to give you a free manual that will give you all of the info u need.

http://www.remingtonchainsaw.com/chainsaw.html

Mar 14, 2009 | Remington Electric Chain Saw

Not finding what you are looking for?
Garden Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Garden Experts

Steve Oakes
Steve Oakes

Level 2 Expert

233 Answers

dannydoesita

Level 3 Expert

775 Answers

sgtstrat

Level 1 Expert

34 Answers

Are you an Electric Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...