Question about Coffee Makers & Espresso Machines

1 Answer

IJUST unboxed my Rowena DG 8520 and it does not steam the lights come on abut steam does not come out

I push the reset button but when I pull the steam button it does not steam

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 39 Answers

Since this is a new item, are you able to return or exchange?

If not, this is a solution I found here on fixya. Hopefully this helps

I had the same problem. I found the trigger button at SmallAppliances.com. You'll have to pry off the rubber grip, and unscrew one or two screws on the handle, bu the trigger inserts neatly into the space. Screw it back together, snap on the rubber grip and it will work like new. Below is the part number & price.

Rowenta DG0123 Knob Trigger, Blue $9.99 (plus shipping)

Watch out, the next thing that will go is the on/off switch. Once it starts getting difficult to turn the unit on or off, just plug and unplug it until you get the new part, or you will be stuck one day and need the iron and go to turn it on and it wont start.

The part is $20, and the same site has it available.

Posted on Aug 25, 2019

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
bozcro

bozcro

  • 867 Answers

SOURCE: My Rowena Steam iron is leaking steam around the

if you can un-screw this part, yes you can replace the o ring for it, get it at hardwaare store.

Posted on Sep 02, 2009

ruth702

Ruth Butler

  • 2 Answers

SOURCE: my rowena precision steam iron steam does not

Solution for me:
I just bought a Rowenta Precision for $5.95 at Goodwill. I brought it home and it didn't work
I read about the cords and weird size screwdriver needed. It sounds like a lot of work. So what I did was push the electrical cord into the iron. it didn't seem to move but must have. The iron works perfectly now. Such a deal!

Posted on Jul 14, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I enter the secret Programming mode on a Miele DG 6401 steam oven to perform a total software reset?


Press and hold the timer button (the bell picture), and whilst doing that press and hold the power button. Then let go of both at the same time. Then press the timer button 5 more times, but on the fifth time hold for a few seconds. Once in Programming mode play with the options to reset and restart descaling.

Apr 12, 2018 | Miele Ovens

1 Answer

Why won't my red light quit blinking?


each time you clean the steamer or refill with water always press and hold the reset button for about 30 seconds, whiles the steamer is on.
hope my answer helps you.

May 10, 2014 | Rowenta DG-980 Iron

1 Answer

Opened fridge door too long. now the light won't come back on and it keeps beeping.


press Over Temp reset button on control panel to reset and turn lights and fan on. Or, just do a Master Reset by pushing the On/Off button twice. DG Vail

Apr 21, 2011 | KitchenAid KSSC42FMS Side by Side...

1 Answer

My rowena precision steam iron steam does not work


Solution for me:
I just bought a Rowenta Precision for $5.95 at Goodwill. I brought it home and it didn't work
I read about the cords and weird size screwdriver needed. It sounds like a lot of work. So what I did was push the electrical cord into the iron. it didn't seem to move but must have. The iron works perfectly now. Such a deal!

Mar 05, 2011 | Rowenta Precision DM580 Iron

1 Answer

I was getting a small "0" error message on the display of my Miele dg 155 steam oven. Tried Descaling but the process didn't complete, stopped at 10 minutes (33 minutes total) and started...


GO TO SERVICE MODE. TURN OVEN OFF OPEN DOOR MOVE KNOWB COUNTER CLOCK WISE TO DEFROST PUSH TEMP BUTTON 3 TIMES PUSH + BUTTON TILL YOU REACH 67 CLOSE DOOR AND WAIT FIVE MINUTES VOILA......

Feb 26, 2011 | Miele DG155-1 Steam Oven Single

1 Answer

No steam


What you need to do is clean out the steam orifice. (The tiny hole the steam comes out) When water is turned to steam it leaves behind mineral deposits, (Iron, Calcium) Especially if you have "hard" water in your area. Here's what you do. Add some CLR, (Calcium,Lime Remover) to the water you put in the iron, let it sit a while, laying flat, then drain the water out. You want to get the nozzle, to, holding the iron upside down, try to immerse the steam nozzle for a couple of seconds in the CLR or drip some directly on it. You can buy this product in most stores. It works well and fast. Dip your showerhead in it too, you'll be suprised at how it improves water flow. It is safe as long as you follow the instructions.

Apr 06, 2010 | Rowenta DG-920 Iron

2 Answers

How do I replace photoconductor?


turn off the machine.open the front door. open the right door. remove the toner hopper. after the hopper is removed , remove the pcu connector. on the old pcu s a push tab. push the tab with your right thumb and pull the old pcu out. unbox new one. pull all tabs and paper off new one and install. put toner hopper back in. close all covers and turn on machine.

Dec 31, 2009 | Ricoh Aficio 1515MF All-In-One Laser...

2 Answers

I am lookind for a fault code reader reset dtcs service light for the home mechanic


Answer Ijust tried this with my 2004 C70 and it worked.
Cheers!

To reset your service light here are the steps.

1. Get in your car and shut the door.
2. Put your key in the ignition
3. Turn your ignition key to position 1
4. Push in your Odometer reset button and hold it in while holding it move the ignition key to position 2 while holding down the odometer reset button.
5. After couple of seconds of holding the button down and the key in position 2 your service light will start to blink once that happens let go of the reset button and start the car.

This should reset your service light and a service light on your Volvo C/S/V70 cars from 1999 onwards.

Oct 24, 2008 | 2003 Volvo C70

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coffee Makers & Espresso Machines Experts

Pierre Laplante

Level 3 Expert

2042 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

graybeard32301

Level 3 Expert

382 Answers

Are you a Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...