Question about Janome Sewing Machines

Open Question

My janome magnolia 7034D is having issues with tension..help

Posted by on

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
bargainbox

Hassy

  • 1388 Answers

SOURCE: Janome Needle plate and needles hitting something underneath

The broken pins are called chaining pins and are tricky for the home user to replace without risking damage to the needle plate as they are difficult to remove and the tiny burr used to hold them firm can easily open up and no longer grip the pin.
There are only a couple of things under the needleplate that are likely to collide with the needles. 1. Lower looper - with the needles 2. Both Loopers colliding with each other - not with the needles 3. Needle guards attached to lower looper - with the needles 4. Fixed Needle guard - with the needles
If you remove the needleplate and VERY gently turn the handwheel you should be able to see and feel where the collision is occuring and have a better idea of the issue.
I would strongly advise that you do not try to operate the machine until you are sure that the colliding components are adjusted. Broken loopers are approx $65 AUD and guards, tho' only about $20 AUD require some finesse in adjustment. Chain Pins approx $6 AUD
My recommendation is to speak with your local Janome dealer for advice and an approximate price to repair, replace or adjust as the case may be.
Your country's Janome website is certain to have a Dealer Locator page to list the nearest to you.
This is one occasion where it is sensible to call on the people who do these things routinely rather than try to DIY and make a more expensive hash of it.
www.bargainbox.com.au

Posted on Nov 22, 2008

Ad
RichSew

Douglas Plant

  • 222 Answers

SOURCE: Does the Janome Magnolia 7034D do a cover stitch?

No, the machine doesnt have that ability

Posted on Jun 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The thread is not straight when I sew


Puckering can be caused by wrong size needle/thread combo. Tension issues... improper threading. Check these first.

Dec 02, 2012 | Janome Magnolia 7330 Sewing Machine

1 Answer

I need instruction manual for Magnolia 7318


Janome Magnolia 7318 (Sewing-Quilting Machine) user manual, guides and product documentations.
http://janome.imvoi.com/sewing-quilting-machine/magnolia-7318.html

Look under available documents and click on "Janome Magnolia 7318 User Manual".
This opens the user manual in PDF format.
You can save the PDF to your local computer to refer to any time without going online.

Dec 03, 2011 | Janome Magnolia 7318 Sewing Machine

1 Answer

How about like every other serger seller , you post a video on how to thread the 7034 D magnolia on line?


Hi marion631...

Check out this video on YouTube...shows you how to thread a Janome sewing machine...
Please take time to rate me thumbs up

http://www.youtube.com/watch?v=FsAKxI79BS0

Sep 17, 2011 | Janome 7034D Sewing Machine

2 Answers

Need the tension settings for a Magnolis 7034D machine. Kids turned them all.


Hi
There are a partial manuals available for Janome Magnolia machines available on their site.
http://www.janome.com/documents/File/ManualFile/Inst%20Book%207034D%20(English).pdf
The tension settings are included on page 27 of the manual.
Hope this helps!

Sep 29, 2010 | Janome 7034D Sewing Machine

1 Answer

I can hear a clicking when serging


Sounds like your looper timing is off. you will have to have your local shop re-time it. Find a shop that gives free estimates first.

Hope that helps,
-Chris

Jun 06, 2010 | Janome 7034D Sewing Machine

1 Answer

Janome Needle plate and needles hitting something underneath


The broken pins are called chaining pins and are tricky for the home user to replace without risking damage to the needle plate as they are difficult to remove and the tiny burr used to hold them firm can easily open up and no longer grip the pin.
There are only a couple of things under the needleplate that are likely to collide with the needles. 1. Lower looper - with the needles 2. Both Loopers colliding with each other - not with the needles 3. Needle guards attached to lower looper - with the needles 4. Fixed Needle guard - with the needles
If you remove the needleplate and VERY gently turn the handwheel you should be able to see and feel where the collision is occuring and have a better idea of the issue.
I would strongly advise that you do not try to operate the machine until you are sure that the colliding components are adjusted. Broken loopers are approx $65 AUD and guards, tho' only about $20 AUD require some finesse in adjustment. Chain Pins approx $6 AUD
My recommendation is to speak with your local Janome dealer for advice and an approximate price to repair, replace or adjust as the case may be.
Your country's Janome website is certain to have a Dealer Locator page to list the nearest to you.
This is one occasion where it is sensible to call on the people who do these things routinely rather than try to DIY and make a more expensive hash of it.
www.bargainbox.com.au

Nov 20, 2008 | Janome 7034D Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...