Question about JVC Car Audio & Video

Open Question

How DO I make display stationary & multicolor fuction display fo jvc kw-r910bt

Posted by on

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
popsgifts

JB PopsGifts.com

  • 160 Answers

SOURCE: JVC KW-AVX 800 "Position error"

Assuming that this is not a new install (the laser is secured with a long, thin brass screw when shipped, and this screw must be removed on installation), and the unit has worked before today, then we will troubleshoot from the "damage" perspective.

The laser isn't centering itself to start position.

This could be due to track binding (dust buildup) or just a hard jolt to the base (pothole?), but the first thing to try is a soft reset...and if that doesn't get it, then a hard-reset next.

*Assuming of course that one of the kids hasn't jammed something foreign into the slot and knocked the head off-track...it happens quite often.

Soft reset:
Most models have a tiny, recessed "reset" button that you can press and hold for 5 seconds with a ball-point pen, located under the faceplate.
This will restore factory settings, and re-center the laser.

If the error returns, a Hard reset:

Disconnect the Positive(+) cable from the car battery for at least 30 seconds, and re-connect.
You will likely lose all saved stations on the radio, but this is a last-resort to avoid removing and opening the unit.

9 times out of 10 this will solve any digital errors, and will free sticky tracks better than half of the time.

Posted on Jun 29, 2010

Ad
muntejaya

Muntejaya Ginting

  • 10421 Answers

SOURCE: KW-AVX810 Car DVD Player: how to change the region code of JVC KW AVX-820...

Please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__8ifr4

Posted on Feb 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can hold down the MENU button until the cows get blue in the face, but Demo never appears on the display. Rotating the volume knob takes me through a large array of settings but none are Demo. KW-R800BT....


First, I'm not a JVC representative.
* Check your warranty. Call for support
* Contact; Website(includes manual); http://support.jvc.com/consumer/product.jsp?modelId=MODL029018
* Support; http://www.us.jvc.com/support/car/

*** The following is for information only.***
* Manual; https://pdf.crutchfieldonline.com/ImageBank/v20120222140500/Manuals/105/105KWR800B.PDF
* See page 4 step 3 to turn off.
* Perform Reset (page 3)
* Bad button(s). Your front display and control panel may need to be replaced.
* You may need to upgrade to current firmware. (contact to install)
* Demo (official); https://www.crutchfield.com/p_105KWR930B/JVC-KW-R930BTS.html?tp=5684&awkw=373095005473&awat=pla&awnw=g&awcr=226791677002&awdv=c&awug=9032739&gclid=EAIaIQobChMIpauyp8jZ3AIVi_5kCh00cwfyEAYYASABEgK3I_D_BwE
* Amazon (note: question option); https://www.amazon.com/JVC-KW-R800BT-Stereo-Receiver-Bluetooth/dp/B0079LGMB4
* Call JVC support 1-800-252-5722 for additional advice.
Aloha, ukeboy57

Aug 06, 2018 | Car Audio & Video

1 Answer

Trying to install a jvc kw-r910bt in a 2009 jetta, and need to find out what to wire the illumination and ignition wires to. The standard diagram for the harness adapter has minimal documentation.


NO ILLUMINATION OR ACCESORY IS PROVIDED AT THE CARS WIRING HARNESS.IT ALL WORKS WITH CAN BUS COMMANDS.U MIGHT NEED TO PURCHASE AN ADAPTOR SO THAT THE BUTTONS AT THE STEERING WHEEL CAN WORK AS WELL.....IF U NEED MORE INFO LET ME KNOW

Sep 28, 2014 | 2009 Volkswagen Jetta

1 Answer

Displaying the clock on the Jvc kw hdr720


Hey did u find a solution? Please let me know, the manual just shows how to set the clock but not.display it, I believe it can be but just haven't found how to do it

Aug 02, 2012 | JVC Kwhdr720 Kw-hdr720 Double Din...

1 Answer

How to set clock jvc kw-xc770 car stero


1 Press SEL for more than 2 seconds. One of the PSM items appears on the display. 2 If "PSM CLOCK H" does not appear, press fast forward and up or fast backward and down repeatedly until it appears. 3 Turn the control dial to adjust the hour. 4 Press fast forward and up or fast backward and down until "PSM CLOCK M" appears on the display. 5 Turn the control dial to adjust the minute. 6 Press SEL again to finish the setting.
http://www.jvc.ca/manuals/KW-XC770.pdf

May 05, 2011 | JVC KW-XC770 CD / Cassette Player

2 Answers

JVC KW-NX 7000, the spring loaded latch for the detachable face is broken so the face plate will not stay on therefore I cannot use my unit. Can I buy a new latch for this and if so where or do I have to...


If you still need help on the display faceplate, check this guy on ebay, he has all the jvc parts, I bought my faceplate touch screen from him, his user id is genecyrus on ebay NAU0005-001X

Oct 18, 2010 | JVC KW-NX7000 Car GPS Receiver

1 Answer

How do I set the clock?


Hi there,
I found this on Page 22 of the JVC KW-XC777 Manual
http://resources.jvc.com/Resources/00/00/97/49688ien.pdf

---------------------------------------------
1. Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display. (See
page 23.)

2. If “CLOCK HOUR” does not appear
press >>| or |<<
repeatedly
until it appears.

3. Adjust the hour.

4. Press >>| or |<< until “CLOCK
MIN (minute)” appears on the display.

5. Adjust the minute.

6. Finish the setting.

To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for 5
seconds, then the power turns off.
-----------------------------------

I hope that helps.

May 25, 2010 | JVC KW-XC777 CD / Cassette Player

1 Answer

JVC KW-NT1 GPS not working in UK


Have you tried re-flashing the unit with the latest EU firmware update available from the JVC website? http://www.jvc-victor.co.jp/english/car/support/navi/nt1/eu/index.html Should overide the current firmware then allow you to use UK maps. If it doesn't work you can always reflash it with the USA update.

Nov 28, 2009 | JVC KW-NT1 Car GPS Receiver

2 Answers

Jvc kw-nx7000 parking break by passed still no video


Connect the parking break as recommended. Then check whether the video appears when parked. If not, send it for service. If yes, then the bipass was not done correctly.

Sep 08, 2009 | JVC KW-NX7000 Car GPS Receiver

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers

Dalynn Turner

Level 2 Expert

346 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...