Question about One For All Televison & Video

Open Question

I have a ONE FOR ALL remote with a Zenith converter box. how can I program the remote to progran

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 3 Answers

SOURCE: converter box codes for rca universal remote rcr3273/3373 for zenith or lg boxes

if It is similar to most RCA universal remotes, to get the code follow these steps(Manual code search MAy take awhile):
1:Manualy turn on the component that u want to control
2: press and hold the component key (ie SAT while holding SAT press ON-OFF key(button) for three seconds until all of the components light up and release the keys(button).
3: keep pressing ON-OFF key until your component turns off.(Note may take awhile)
4: one the correct code is found hit the STOP key and it will save your component IF YOU DO NOT HIT THE STOP KEY THE CORRECT CODE WILL NOT BE STORED.
Hope this works

Posted on Oct 26, 2008

Ad

Anonymous

  • 20 Answers

SOURCE: program my zenith converter box to my tv

while holding down the tvs power button push the channel up or down slowly. this will turn your tv off when your code is found. when it is found and your tv goes off release the power button. now your remote will work with your tv...........

Posted on Jan 02, 2009

Anonymous

  • 1 Answer

SOURCE: Problem programming Zenith Digital TV Converter DTT901 remote.

Be sure that your TV is set to channel 3 or 4 if you are using the RF cable or Video 1, etc if using the Audio/Video cable.  The Installation  Guide should appear.  The "improved" picture that you are seeing is simply the analog throughput, not the digital conversion.

Posted on Jan 17, 2009

andy4254

andy williard

  • 226 Answers

SOURCE: Zenith mbr3447 code for magnavox converter box?

To download the full code list with the instructions on how to program go to link below:
http://www.replacementremotes.com/store/productdetailp.cfm?productid=61978&reset=1
if your none of the codes work for you cable box then your SOL. try programming your cable box remote for your tv instread.

Posted on Apr 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program a Toshiba remote to a zenith converter box


Signal converter boxes are pretty easy to set up - ABC News

abcnews.go.com/Technology/AheadoftheCurve/story?id=5485537
Digital Switch: How to Set Up Your Converter Box. ... If you subscribe to cable, satellite or some other pay-TV service, you'll continue to receive programming. ... aToshiba TV in my kitchen: Magnavox's TB100MW9 and Zenith's DTT901. The boxes are simple enough to set up, though I prefer the Zenith's remote control and ...

Comcast Remote Codes ' Program Your Remote Control

https://customer.xfinity.com/remotes/
Help and support with your XFINITY® Remote, select your remote control type and get the support you need to enjoy your XFINITY® TV!

Zenith remote control code list - channel recovery morning ...

www.thompsontv.com/zcodes.html

Dec 15, 2015 | Zenith Televison & Video

1 Answer

What is the code to program a Zenith digital converter box?


If you have a recent GE remote, it may have a code for your Zenith STB. The code list included in the package with the remote may include it. In any event, you can use the code search feature of the remote to find a code that will work. if you search through all codes stored in the remote without success, you may have to try another universal remote. All universal remotes do not contain all possible codes.

Sep 12, 2015 | Zenith 3-Device Universal Remote Easy To...

1 Answer

What is the code of zenith converter box to program with my universal control remote?


If the remote is universal, you should be able to perform a code search to find something that work with your Zenith converter. If you search through all codes stored in the remote without success, you may have to try another universal remote. Some of the newer RCA universal remotes specifically control converters and other devices.

Feb 25, 2015 | Zenith Televison & Video

1 Answer

Have a Zenith DTT901 converter box, need the remote codes for my zenith remote, thanks


Your Zenith remote should be able to control your Zenith DTV box. If not, your remote may not have the latest codes or it could be defective. You may have to try a newer programmable remote.

Dec 10, 2014 | Zenith Dtt901 Digital Tv Tuner Converter...

1 Answer

I own an Insignia flat screen tv, NS-LCD27, & I was given the Insignia converter box, NS-DXA1; how do I program tv remote for the box? Thanks, frances b.


The digital to analog converters did not exist when the TV was built and the remote programmed. Thus you will have more luck programming the converter box's remote to control the TV. (At least with my converter box, the included remote could only turn on and off the TV. It would only change channels on the converter.)

Most universal remotes only have codes for devices released 6 months or more before the TV was programmed. So a new universal remote will probably control both the TV and the converter box. (Program the converter box using a code for LG or Zenith set top boxes if Insignia isn't listed. LG makes Insignia video products for Best Buy.) The remotes that are programmable by a USB connection to a computer are the fastest to set up.

A replacement remote for your TV is available here: http://www.mcmelectronics.com/partfinder.aspx?brand=&mdl=NS-LCD27&mode=part . An exact replacement remote for the converter box can be purchased at: http://www.remotes.com/remotes/servlet/rs?a=gmi&uuid=13055197980390&smodel=NSDXA1&brand_pn=INSIGNIA_NSDXA1 . The manual for the converter box (as a PDF) is here: http://cbsdallas.files.wordpress.com/2011/01/insignia-ns-dxa1-manual.pdf .

I hope this helps.

Cindy Wells

May 16, 2011 | Insignia Televison & Video

1 Answer

Zenith mbr3447 code for magnavox converter box?


To download the full code list with the instructions on how to program go to link below:
http://www.replacementremotes.com/store/productdetailp.cfm?productid=61978&reset=1
if your none of the codes work for you cable box then your SOL. try programming your cable box remote for your tv instread.

Jan 15, 2009 | Zenith MBR3447 Remote Control

1 Answer

Problem programming Zenith Digital TV Converter DTT901 remote.


Be sure that your TV is set to channel 3 or 4 if you are using the RF cable or Video 1, etc if using the Audio/Video cable.  The Installation  Guide should appear.  The "improved" picture that you are seeing is simply the analog throughput, not the digital conversion.

Nov 21, 2008 | Zenith DBZN-311 Remote Control

1 Answer

Universal remote programming


Since Insignia is really Zenith, a universal remote that can work on Zeniths should do the job. I have this converter box and use a RCA universal remote. I code that works is usually reserved for Zenith satellite boxes (5203).

Oct 26, 2008 | Insignia Digital-to-Analog Converter for...

5 Answers

I am trying to find a universal remote code to control the new Zenith digital tv tuner converter box. The model # is DTT900. It is for a person with low vision who cannot see the buttons on the remote...


Hi,

Pls post back with the brand and model of the universal (replacement) Remote Control or what remote control you would want to use with the Zenith DTT900 Digital-to-Analog Converter Box.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Oct 23, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Cindy Wells

Level 3 Expert

6049 Answers

Joe Negus
Joe Negus

Level 2 Expert

652 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...