Question about Music

Open Question

How to disassemble Vocalist Live 3 for switch replacement

How to replace Part A / B Selector Switch on Vocalist Live 3

Posted by on

Ad

5 Suggested Answers

Fred Yearian

  • 5603 Answers

SOURCE: Power supply received an overload. Replaced supply

Make sure the replacement power supply was EXACT same ratings and polarity.

Posted on Sep 10, 2009

Testimonial: "Should be wearing glasses all the time as this power supply is AC, I assumed it was DC"

Ad

Fred Yearian

  • 5603 Answers

SOURCE: replacement encoder pot for a Digitech Vocalist VR rack unit?

Digikey.com and Mouser.com have encoders.

Their online catalog should help you find a replacement. Analyze how many detents it has AND the circuit board layout and number of pins.

DO NOT be surprised if you have to shorten the shaft to match the original one.

Posted on Jan 06, 2010

Ad

pcollins803

  • 1 Answer

SOURCE: Digitech Vocalist LIve 3 Problem: My mic signal

Do a factory reset - explained in the owners manual. Sometimes these units "lock up" with a problem and I have found that doing a factory reset "cleans" it up putting all setting back to factory.

Posted on Jul 22, 2011

sid2085

  • 1 Answer

SOURCE: I was using my digitech vocalist live 2 pedal

After using my digitech vocalist live 2 pedal, the next time I used it only the harmony side of it is working. The harmony on/off switch to deactivate the harmonys just switch the selected harmonies on the effects side works as well.The open mike side is dead. Any ideas??

Posted on Sep 15, 2011

John McPherson

  • 1212 Answers

SOURCE: No output signal for vocalist live 3

If the mic is a low Z- mic, that might be the issue. Check the mic straight into the sound card of the mac and see if it works or if it is shorted. Is there a switchon the mic? it may be dirty.

Posted on Jan 28, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i run Vocalist live 3 through only an amp? if so how what cables do i need.?


The only guitar amp that has 2 female jacks, one xlr and one 1/4" is a tall Acoustisonic anp by Fender . I have one and I use the Vocalist 3 and I still have an instrument jack for my acoustic guitar . hope this helps .

Sep 18, 2012 | Digi-Tech Digitech Vocalist Live 4...

1 Answer

No output signal for vocalist live 3


If the mic is a low Z- mic, that might be the issue. Check the mic straight into the sound card of the mac and see if it works or if it is shorted. Is there a switchon the mic? it may be dirty.

Jan 28, 2012 | Music

1 Answer

Vocalist Live 4


U.S and Canada: 20 VAC, 60 Hz Adapter: PS093B-20
Japan: 00 VAC, 50/60 Hz Adapter: PS093B-00
Europe: 230 VAC, 50 Hz Adapter: PS093B-230
UK: 240 VAC, 50 Hz Adapter: PS093B-240

Power adapter requirement straight from the user manual. I am sure you are aware that a simple plug adapter in a tourist shop does nothing to convert 120v US to 240v AUS. Note you unit does not like temperatures above 40C. And you can get that in Australia.

Bear in mind the timezone difference if you try Digitech support in the US.

DIGITECH VOCALIST LIVE 4 Owner Manual Page 36

Dec 30, 2017 | Digi-Tech Digitech Vocalist Live 4...

1 Answer

My digitech looper phrase sampler will not turn on


A common problem is that somebody has paired the WRONG power adapter to this unit.

The REQUIRED adapter should be 9VAC (not DC) at 1300ma or 1.3 amps.

Note that UNIVERSAL replacement adapters will NOT work with the Vocalist.

Feb 06, 2011 | Digi-Tech Digitech Vocalist Live 4...

2 Answers

I was using my digitech vocalist live 2 pedal during a gig 3 days ago and about 2 songs in, everytime i touched any part of the pedal or pressed the harmony on/off switch to activate the harmonys, the...


Yeah I have an idea... It is likely static electric discharge. At this time of the year we get zapped touching metal things and it also drives electronics nuts... You don't even have to feel it to get zapped.

Try using in your bare feet and see if it fusses... We had a lady vocalist wearing those ugg boots and caused static pops in her microphone... anyway try the test and if it fixes the problem, then look up Staticide spray... You can get it at Amazon.com for example... spray floor in the area you are playing on to kill the static.

The only other thing is to check if wiggling the power input plug causes the problem. Those plugs are notorious for poor connections when they wear.

Dec 28, 2010 | DIGITECH VOCALIST LIVE 2

2 Answers

Hi i have a vocalist live 3.. my harmony button..when i press it, it does not stay on. can someone please help me. it worked earlier but not now, i am not sure if i pressed somehting


To the guy with the vocalist live 3. You need to change the FS (footswitch) setting under setup. It toggles between a true switch and working only when you hold it down.

Nov 22, 2010 | Digi-Tech Digitech Vocalist Live 4...

1 Answer

When i press the harmony effect i have to hold it


Enter the setup menu by pressing both the up/dn arrows. In the setup menu you can change the switch mode from momentary back to toggle.

May 15, 2010 | Digi-Tech Digitech Vocalist Live 4...

1 Answer

My digitech vocalist 2 is extemely noisy! the ground switch helps only partly. It seems to be bad when you first turn it on and gets worse the longer you use it.


To check for a temperature related problem, try putting it in the freezer for a while then bring it out and see if it affects the noise. If it does, then problem can be found with circuit cooler mist.

Also see if noise is affected by vibration.

Sep 09, 2009 | DIGITECH VOCALIST LIVE 2

Not finding what you are looking for?
Music Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Music Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Brad Brown

Level 3 Expert

18166 Answers

Are you a Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...