Question about Home Security
Did you reset it? If not try a reset this will usually fix the issues with those types of doorbells.
The reset option is under the face plate.
Posted on Oct 07, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
the only way that this door bell is ringing is when you manually action it ...right>???so ...the issue is on the button (switch ) or there is a short on the wires that goes to the button ....so ..if I was in your place ..I will power it off..and open the switch button (the one from the door that it pressed to action it ) ..and see if it is still ok ..See that if yo remove one wire ..is stopping ..if does..this means it is the problem and it needs replace ..or checked for a short circuit ..if this will not stop it ..means that the wires are making contact somewhere on the way ...and you have to go along them and check ..until find the problems ..If you find no problem along the buttons wires..than move on the unit itself..and open it to check for a short circuit between wire that should not suppose to touch ....that's almost all you have to do ...if youdo not find the issue ..is probably internal one in the unit itself ..and probably the fastest fix is to change it ..
Posted on May 15, 2010
sounds like a internal fuse look in your manual and see if it may have a heatsink switch that disables the radio if the heat levels get too high.
Posted on May 27, 2010
Tips for a great answer:
Apr 04, 2015 | Home Security
Sep 08, 2008 | Computers & Internet
Oct 24, 2012 | Novi Wireless Doorbell Intercom Security...
Based on the problem description, there is nothing you can check to try and get the radio to work again. The most likely cause is a Tuner Module failure due to electrical surge. You will need to send the MC602 to us for service. We will need you full address, phone number, and the serial number or date code from the back of the MC602. The serial number/date code will be on a white sticker and may have a barcode on the sticker as well. When receive you information, we will issue you a Return of Product Authorization (RPA) number and instructions for returning the unit. There will be a repair charge and that can be provided with the RPA number.
Senior Applications Engineer
Sep 23, 2010 | M&S Systems Audio Players & Recorders
May 27, 2010 | M&S Systems M & S SYSTEMS DMC1CDB Whole...
May 14, 2010 | M&S Systems Local Audio Input Module -...
Jan 04, 2010 | Desa International White Wireless Plug In...
Mar 05, 2008 | Audio Players & Recorders
56 people viewed this question
Usually answered in minutes!