Question about Miele Optima G2430SCi Stainless Steel Built-in Dishwasher

1 Answer

My Miele dishwasher does not get the plastic refridgerator items dry

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 24 Answers

Hello Zipmap0202,
I have never found that plastic dries very well in my Miele dishwasher as well.
Check your rinse aid indicator to see if it is on. Next to the soap door there is a door you can add rinse aid to. There is also a dispensing control knob that allows you to turn the amount of rinse aid dispensed up or down. Try changing the setting and see how that works. I have done this and it has not worked well for me. I find opening the door after the cycle is done (Just cracking) it will dry plastic alot better

Posted on Sep 16, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is this normal for Miele dishwasher? - some water left below filter and not everything dry after cycle


Plastic items do not get dry because they do not get as hot as glassware. A lot of moisture inside is do to the evaporation of water on the dishes during the dry cycle. Some water remains in the dishwasher because it is impossible to pump all of it out. There is nothing wrong with your dishwasher.

Oct 31, 2015 | Miele Dishwashers

1 Answer

Does the Miele G665 dishwashers have a heat element as no heat is coming from my dishwasher


If it like other Mieles, it has an element to heat water if required to reach cleaning temperature, but does not have a drying element. Even then, it should give off some heat in the drying cycle and be hot after finishing.

Nov 17, 2014 | Miele 24 in. G665 Built-in Dishwasher

1 Answer

Miele G863 SCVi All lights blink at the end and it doesn't dry


Check the web for,
2011-11-25_043923_g600__800_miele_service_manual.pdf

I found that PDF while working on fixing my Miele dishwasher and found it more helpful then most advice on the web.

Dec 30, 2012 | Miele Dishwashers

1 Answer

When attempting to start dishwasher load the signal F 70 come up and it wont work. Purchased 2nd Jan 2008.


F70, waterproof system activated. this means you have water in the bottom pan of the dishwasher. your miele shuts itself off and runs the drain pump continuously any time water leaking is detected. you can pull out the black plastic toe kick under the door. there is a cover panel in the center held on with two t20 screws. you can dry up the water and try to run a cycle. if it works ok, cut back on your detergent by 1/2. if it leaks again, you should probably request service from miele. if you want to try to repair it yourself, let me know and I will help you troubleshoot it further.

Nov 17, 2010 | Miele Dishwashers

1 Answer

Miele G 880 SC -- dishes not drying


Hi,

Make sure you are using rinse aid. even if you are using tablets which has rinse aid built into the tablets Miele still recommend using rinse aid liquid as well.
Make sure you have the rinse aid setting on 3ml

Plastic will not dry as well as plates as it doesn't hold the heat.

You could call out a Miele service tech if it is still under warranty and he would be able to increase the drying time through his computer.

Hope this helps.

Mar 20, 2010 | Miele G880 Dishwasher

1 Answer

Dishwasher is not drying properly and is out of warranty. Saw a post that LG has a free retrofit to fix problem but customer service denies. Is there a recall on the LDS5811ww?


No recall.
You should use water temp 120 to 150 F, and make sure you use rinse aid (such as Jet Dry). Plastic items (like cheap advertising cups or storage containers) do not have enough mass to retain heat and dry very well. Item with more mass (glass and metal items) will dry as long as you conform to listed perameters listed above.

Oct 16, 2009 | LG 24 in. LDS 5811 Built-in Dishwasher

1 Answer

Once the cycle is complete (rinse, drying, end) the dishes are clean but not dry.


#1 plastic dishes cups etc will rarely completely dry
check your heater, check for continuity on the heater it should ohm out.
does the heater get hot?
are you running hot water at the sink before pushing the start button?
are you using a rinse agent such as jet dry?

Sep 03, 2009 | Miele G892SC SS Dishwasher

Not finding what you are looking for?
Miele Optima G2430SCi Stainless Steel Built-in Dishwasher Logo

605 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Dishwashers Experts

mpservices

Level 2 Expert

190 Answers

Mike

Level 3 Expert

4367 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Are you a Miele Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...