Question about PfaFF Sewing Machines
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: threading a pfaff creative 7570
Always thread the machine with the presser foot up. This keeps the tension disks open while you are threading. Open the lid on top. Put thread on spool holder. Go directly to your left and down the path on the farthest left. Go all the way to the bottom and bring the thread up on the path closer to the spool. Hook the thread through the metal piece that moves up and down while sewing. It should be in the highest position when threading. Run the thread down and clip into the small metal holder above the needle. Pull down needle threader, draw thread across front of it from left to right and pull through needle.
Posted on Feb 14, 2008
Look for a small turning wheel, just below the green and pink selection knobs, on the front right of your machine. Turn it anticlock wise for a darker image and clockwise for a lighter image. Enjoy!
Posted on Dec 24, 2008
On these machines you cannot open the left side to remove the bulb. Your machine accessory kit should have come with a rubber tool that is ribbed with a cup-shaped opening on either end. This is a tool for removing the bulb. Tilt the machine with the base facing up so you can see where the bulb is and use this tool to twist the bulb gently. It sould come out with no problem! Hope this helps!
Posted on Sep 12, 2009
Testimonial: "Thank you"
SOURCE: i have just purchased this pfaff 7570 creative as a second hand unit and have never used it. it has been in storage for period of time. when i plug in the ac220V and switch the machine on the display
it's possible that the motherboard could have gone out, taking the machine in for service will tell for sure
Posted on Mar 10, 2012
it show a part of the problem says a battery went flat,,was there any corrosion in the place you put the battery. if there was corrision it could have shorted something in the machine
it's very posssible that something has gone wrong with the computer part of the machine
Posted on Mar 22, 2012
Tips for a great answer:
Aug 25, 2015 | PfaFF Creative 7570
Apr 05, 2014 | PfaFF Sewing Machines
Mar 09, 2012 | PfaFF Creative 7570
Oct 22, 2010 | PfaFF Creative 7570
Jan 29, 2009 | PfaFF Creative 7570
Dec 23, 2008 | PfaFF Creative 7570
Mar 21, 2008 | PfaFF Creative 7570
Oct 14, 2019 | PfaFF Sewing Machines
48 people viewed this question
Usually answered in minutes!