Question about Sharp Televison & Video

Open Question

So I have a sharp LC-70LE650U, if I have the tv sit on a desk without a mount or a stand the picture comes on fine. But if I put it on the wall mount the right side of the screen goes darker than the left. How can I fix this

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Chi Chu

  • 8457 Answers

SOURCE: Flickering screen

Ur LCD inverter board is dying.Must replaced this board,to get picture back good.Tries Shopjimmy.com,Ebay.com for the board.It a long board.

Posted on Jan 26, 2010

Ad

Anonymous

  • 13 Answers

SOURCE: Darker screen on the right hand side of my Sharp

try going to menu and center the screen both vertically and horizantal, the manual should help

Posted on Feb 26, 2010

Steve

  • 3289 Answers

SOURCE: lc-52d64u Instruction_Manual

Grab a copy of your LC-52D64U manual here. I hope this helps!

Posted on Nov 09, 2011

thevolatile1

  • 2 Answers

SOURCE: I have a Lg 42" lcd tv (42LG3000) TV is wall

White screen with good audio. before buying pcbs & such. try my repair method.. you need to get the lcd unit off the facia & then remove the front lcd metal frame. at the top of the screen you have 2 thin pcbs - chances are that the ribbon cable got at least one track unbonded. first off put some double sided tape under the pcbs to stick then to the frame - that'll take the bend out of those pcbs !! next put cellotape over the ribbon cables. i then cut 6 pieces of sponge 15mm thick & wide as the ribbon cable & glue to the tape on the ribbon at what would be the top edge of the screen (covering the point where ribbon meets pcb).. put the metal frame on top edge first to keep the sponge straight !! put it back together & fire it up. if it still aint working you may need a tcon pcb (little square one at the top). this fixed my 42lg3000 but can work on others with same fault !!

Posted on Dec 19, 2011

SD Tech

SD Tech

  • 14553 Answers

SOURCE: dark line down the middle of my flat screen tv

Most LCD and PLASMA sets use two boards (some combine them into one board) that drive the Display Panel (the entire front screen unit) so I would suspect one of yours is bad.

The other unpleasant possible cause is where the left board is connected to the Display Panel (entire front screen unit) you have a problem inside that Display Panel and that is fatal as there is no way to get INSIDE the panel---it can cause both lines and a dark picture on one side of the screen.

Posted on May 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 70in sharp aquos lc-70le650u will turn on and work fine with great picture and lighting then after about 5 mins it cuts off and the power indicat or blinks 2 times slowly and 5 times fast


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Dec 08, 2016 | Sharp AQUOS LC-70LE650U 70" LED TV...

1 Answer

Sharp Aquos lc-70LE650U-No Power at all. When I plug it into wall the icon does not even light up. This tv was working fine till i took it off of stand and hung on the wall.


Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

May 12, 2016 | Sharp AQUOS LC-70LE650U 70" Class Full HD...

1 Answer

NEED BASE STAND FOR A SHARP LC-46SV50U


Go to shopjimmy.com and get a universal stand. It attaches to the back of the TV just like a wall mount.

Mar 30, 2013 | Sharp AQUOS LC-46SV50U 46" 1080p LCD TV -...

1 Answer

Can't find tv stand for Sharp Aquos LC-32D44U


You can get a universal stand from shopjimmy.com. It attaches to the back of the TV just like a wall mount.

Aug 15, 2012 | Sharp AQUOS LC-32D44U 32 in. LCD TV

2 Answers

Can the monitor height be adjusted. It seems to be fixed to the stand with no adjustments?


No but you could always put something under the stand most can only be tilted for lighting reasons.

Jul 04, 2011 | Princeton Digital VL1916 19" LCD Monitor

1 Answer

I just purchased a 52 inch phillips tv and the stand that the tv sits on adds 2 inches which doesn't allow the tv to fit in my entertainment center. What can I do?? I need a shorter stand...


Just take off the stand altogether if you can lay the TV close enough to a solid vertical support.

My 47'' Philips spent about a year without a stand sitting on a desk and leaning on a wall.

It's heavy enough and as you approach to completely vertical position its main force will be pointing down, not forward.

If you can't lean it on anything solid or if it doesn't sit well while in an entertainment center...not sure what I'd suggest....short of adjustable wall mount stands...

Nov 07, 2009 | Philips 52PFL3603D/27 52 in. LCD HDTV

1 Answer

Blank Screen


I had this problem on my 42" Philips. Just got it yesterday and worked fine on the tv stand. As soon as I mounted the TV to the wall via wall mount system, I had the exact same issue you did. Figured it out today.

The wall mount was putting pressure against the center of the back of the tv (tv set had a slightly rounded back plate, and the mount was a flat plate). As soon as I put spacers (part of the wall mount hardware set) between the wall mount braket and the tv so there was no contact except at the mounting holes, the tv worked fine.

My theory is the pressure pushed the tv back plate against some board components which caused them to overheat (no air flow); or put pressure on internal connectors. I dont know.

Hope this helps, may not apply to your situation.

Sep 18, 2009 | Sony KDF-E60A20 60 in. LCD HDTV

2 Answers

We just set up our 37 in sharp and get no picture


If this is a new set, return it for an exchange. This one sounds like an LCD set which uses a "back light". This back light is not working. This is a warranty repair or exchange.
Dan

Mar 17, 2008 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...