Question about Hobart Food Mixers

Hobart HL600 error code 23. Please help - Hobart Food Mixers

2 Suggested Answers

6ya staff

2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

anthony james

640 Answers

SOURCE: hobart hl600 mixer

I know what these codes are: code 19 is that phase c is over current fault and code 23 is a motor stall fault.I would start by making sure you 3 phase wiring going into the mixer is there.I service these mixers as im a service tech for hobart.these units are very detailed and i can walk you thru some things to check but if you have an electrical problem you most likley will have to call a hobart service tech because we have special equipment to diagnose the fault.let me know it may be something simple as these mixers are usally maintenance free.

Posted on Nov 15, 2007

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

What does 0c2 error code in Hobart mixer HL600

It is over current issue due to low supply voltage or batch size too big or frequency drive shorted.

Sep 07, 2015 | Hobart Food Mixers

1 Answer

What is the error code b-in

It's meant to tell the operator that the bowl is not in proper operating position. If the bowl is in the proper position then the bowl in switch may be bad.

Jul 01, 2015 | Hobart HL600 Legacy Stand Mixer

1 Answer

HOW CAN I GET THE WIRING DIAGRAM FOR HL600 HOBART MIXER

Take a look at:

http://www.diversewebsitesolutions.com.au/hf/manuals/FOOD%20PREP/MIXERS/CURRENT%202011%20MIXERS/HOBART%20HL600/HOBART%20HL600%20MIXER%20TECHNICAL%20AND%20SERVICE%20INFORMATION/

Oct 07, 2014 | Hobart Food Mixers

1 Answer

I need the pinion belvet for a hobart hl 600 legacy, mixer and some other parts, with prices please. Thanks

Check www.hobartservice.com for your local Hobart office.

May 20, 2011 | Hobart HL600 Legacy Stand Mixer

1 Answer

Hobart Legacy mixer error code oc3 will not run.

Hobart mixer, HL300, stops and flashes as oc3, wounded what is broken?

Dec 08, 2010 | Hobart HL600 Legacy Stand Mixer

1 Answer

What is error code 99 for a hobart HL 600 mixer?

error 99 stands for communication fault between timer board and the sr drive.there are 5 things that can cause this error.1.rs-485 cable disconnected or malfunction 2.1 con monitordisconnected or malfunction. 3.run/stop wiring disconnected or malfunction. 4.timer board malfunction. 5.sr drive malfunction. hope this helps, dont forget to vote, thanks, monomoy

Jan 29, 2010 | Hobart HL600 Legacy Stand Mixer

1 Answer

Keep getting error code 23 when trying to start mixer

i will try to help, always include ml# with problem description on any hobart pc. of equip. which is located on the info. plate. there are 2 v.f.d.for this mixer ,sr drive being 1st generation, and gen. elec drive 2nd generation, on the sr drive err23 indicates a motor stall condition there are 6 most likely causes for this err. 1st, batch size too large,ck. capacity chart. 2nd,encoder malfunction. 3rd,motor malfunction. 4th,drive malfuction. 5th,1 con coil malfunction. 6th,2 cr malfunction. if this does not help, repost problem and i will ck. to see if i can be of anymore help, please dont forget to vote for me thanks, monomoy

Oct 05, 2009 | Hobart HL600 Legacy Stand Mixer

1 Answer