Question about Kenmore Washing Machines
take the front bottom panel off. inside there is a drain pump. you need to remove filter from drain pump its look like a knob. be careful because their is water inside your drain pump so use some big thing for water. clean your filter. put filter back tight. i hope will solve your problem.
Posted on May 24, 2009
It may be the coupler. see my link to sears parts for exploded view. coupler is number 13. The coupler is behind the motor and will need the main cover (case) removed to replace it. Inspection is also easier with the case removed. It's an $18.00 part and a bout $90.00 in labor to hire it done. I can help. http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?modelNumber=110.22722100&pop=flush at this link choose BRAKE/CLUTCH/GEARCASE/MOTOR/PUMP
Posted on Jul 03, 2009
I have found this and i hope this gets you in the right direction. Merry X-mas and Happy New Year also.
Sud SUDS LOCK (Overdose of Detergent detected during the Wash Cycle)
The motor control unit senses a suds lock condition by analyzing the current draw on the drive motor. If "Sud" is displayed a potential suds lock is detected. This may signify a bad pump, an extra heavy load, excessive detergent, or excessive suds.
Best regards Richard
Posted on Dec 15, 2009
Tips for a great answer:
Jan 15, 2016 | Kenmore Washing Machines
Sep 15, 2012 | Kenmore 98702 Stacked Washer/Dryer
Sep 10, 2011 | Kenmore 600 3.5 cu. ft. Top Load 110-2962...
Aug 10, 2011 | Kenmore Front Load Washer
Oct 20, 2010 | Kenmore 12502 Top Load Washer
Sep 18, 2010 | Kenmore 3.2 cu. ft. Plus Top Load Washer
Sep 08, 2010 | Kenmore HE2 Plus Front Load Washer
Sep 02, 2010 | Frigidaire ATF6000ES Front Load Washer
May 25, 2010 | Kenmore Elite 45986 Front Load Washer
Jan 28, 2020 | Kenmore Washing Machines
67 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: