Question about Bissell Vacuums

Open Question

How do I replace the ready tools dial on a Bissell Pro Heat Pet?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
advacak

Denny Adams

  • 125 Answers

SOURCE: I have the bissell pro

check the belt

Posted on Dec 03, 2008

Ad

sandham

  • 52 Answers

SOURCE: Bissell Pro Heat PET 2x

the element may need to be clean because when these units sit they lime up in the water way

Posted on Mar 03, 2010

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: Bissell ready tool dial broken

Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
sghs

Posted on Sep 30, 2010

SOURCE: how do you get the smart mix dial to line back up

First, insert the black plastic control valve all the way into the hole. Make sure that the rounded face with the cut in it is facing toward the tall part of the chamber/hole where you inserted the valve. Try to line up the dial with where the threads would enter the cut in the valve. Hint: the hole in the center of the dial will go over the tall part of the chamber wall. Once you believe you have it aligned correctly, replace the plastic body cover and keep the dial out of the body cover. Just put in the screw on the side the dial is on, so if it is not aligned properly, you can remove the cover more quickly. Once you have the body screwed down, screw the dial into the hole and it should align easily with the valve in the hole. If not, remove the body cover, and try to realign the valve again. Repeat until you get the dial to screw in easliy.

I just did this today because I had to fix a customer's unit. It took me about 20 minutes or so to figure it out, but I finally got it. I was hoping your question had an answer to it when I got on here, but at least I got it figured out anyway. Hope this helps! That is if you still have this unit...

Posted on Nov 04, 2011

small6363

Les Dickinson

  • 18429 Answers

SOURCE: need an internal parts list for a bissell pro heat pet, model # 8910

click this link for parts list and diagram for bissell 8910
http://www.ereplacementparts.com/bissell-8910-proheat-clearview-powersteamer-carpet-cleaner-parts-c-129994_129995_130010.html

Posted on Aug 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a bissell pro heat pet tried to use attachments there is no suction i am unable to use it because of this


Check the lever that closes the valve to switch the suction from floor to tools to make sure it's working properly.

Feb 13, 2018 | Bissell Vacuums

1 Answer

How to replace belt on a bissell 66e1 pro heat lift off pet carpet cleaner


There are two belts on your model. Remove the screws on the end cap assembly on each side to remove the assembly to gain access to the belts. Remove the screws holding the brush roll assembly to remove and replace the belts.

Jan 08, 2017 | Bissell Vacuums

1 Answer

Brushes don't rotate on proheat2X,


How to Replace the Belt & Brushroll on Bissell ProHeat 2X ...

? 2:11
https://www.youtube.com/watch?v=Jj_43IHz9U4
Dec 28, 2012 - Uploaded by eVacuumBags
How to Replace the Belt & Brushroll on Bissell ProHeat 2X Series Carpet ... How to Replace Bissell Deep Cleaner Pump Belt orBrush Belt - Duration: 1:44. ... Won't SPRAY solution Rollers spin Fixing Bissell ProHeat Carpet ...

Brushes Will Not Rotate Deep Clean Essential - YouTube

? 0:53
https://www.youtube.com/watch?v=gbEXY5jkWSc
Apr 9, 2015 - Uploaded by BISSELL
If your machine is turned on and in the upright position yourbrushes will not turn. ... How to Replace the Belt & Brushroll on Bissell ProHeat 2X Series Carpet ... Won't SPRAY solution Rollers spin Fixing Bissell ProHeat Carpet ...

bissell pro heat 2x brushes wont spin Questions & Answers ...

www.fixya.com > Forum > Tags
... bissell pro heat pet 2x and my brushes won't turn or operate... check the belt belts ok brushes won't turn/rotate turn dial on bottom front on the water tank to ...

Feb 03, 2016 | Vacuums

1 Answer

My bissell pro heat pet carpet cleaner wont suction


I have a pro hear Boswell I can't.get it to sick up water help

Apr 03, 2014 | Bissell Vacuums

1 Answer

Bissell pro heat will not extract water from the carpet


Try checking the top section of the machine (where the dial is located to switch it from floor to tool) and there is a little red plastic piece about 1 inch square on the inside of it. This is a lint filter that has a little door on it. Open the door or remove the entire thing to clean it out. It is probably completely blocked with hair, etc.. which is why you have no suction. Replace it after you clean it out and hopefully your problem will be solved!

Sep 06, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

Bissell 2x pro heat will not **** water out of my carpet


Try turning the dial on the front that says tools. That solved the same problem for me!!!!

Apr 21, 2009 | Bissell 9500 ProHeat 2X CleanShot Upright...

1 Answer

I am not getting any water to come out of the floor part or tools


Hi There!
Here is a PDF link for a Bissell Service Center Repair Guide. Hope it helps! Juli ;)
newzealand.bissell.com/images/IncludeContent/Service_Center_Help/Upright_Deep_Cleaner_Repair_Guide.pdf

Nov 27, 2008 | Bissell 7920 ProHeat Pro-Tech Upright...

1 Answer

Bissell ready tool dial broken


Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
sghs

Aug 30, 2008 | Bissell 7920 ProHeat Pro-Tech Upright...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Brad Brown

Level 3 Expert

18121 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...